• 제목/요약/키워드: Entrance section

검색결과 127건 처리시간 0.021초

Gasdynamic Adjustment at Modeling of Flight Conditions Appropriate M=6

  • 우관제
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2000년도 제14회 학술강연논문집
    • /
    • pp.8-8
    • /
    • 2000
  • In this paper are presented main power and gasdynamic characteristics of C-l6VK hypersonic test cell of Research Test Center of CIAM. Gasdynamic adjustment of the C-l6VK test cell was carried out with the working section constructed on scheme of Ramjet/scramjet test in free stream. Gasdynamic adjustment was conducted stage by stage in tile following sequence. First, check and preparation of all technical systems and checking measuring system. Than determination of the characteristics of test cell on cold (without the heating of air at entrance) regime and determination of the characteristics of test cell on regimes with the heating of air. Finally determination of tile characteristics of test cell with the loading of the working part by object. On tile final stage of gasdynamic adjustment two experiments with tile axisymmetric Scramjet model loaded into the working part of test cell were conducted. The first experiment was conducted with the purpose of determination of flow parameters with the object leaded into the working part and verification of experiment cyclogram. The second experiment was conducted with injection of hydrogen into the combustion chamber of object, that is tile conditions on test cell simulated Scramjet flight Mach number M = 6. Such methodology of gasdynamic adjustment allows to determine influence of experimental object on flow parameters in the working part at different conditions of experiment (with the burning in combustion chamber of object and without the homing), and also to compare flow characteristics in the object duct.

  • PDF

초.중.고교 확률.통계의 효율적인 지도에 관한 연구 (A Study on Analysis through the Probability and Statistics of the Curriculum and Text book in Elementary, Middle and High School)

  • 오후진;유병대
    • 한국학교수학회논문집
    • /
    • 제1권1호
    • /
    • pp.59-67
    • /
    • 1998
  • Probability and statistics is an important section in mathematics which is deeply related to everyday living, natural science and social science. In spite of its importance, many students will throw away it because it becomes very harder as its step(stage) deepens and probability and statistics' relative importance is very small in Korea-SAT(the test of college entrance in Korea). Therefore, by analyzing the involvement carefully between the curriculum in the elementary, middle, high school and the text book, by studying the problem and improvement direction, it is necessary to investigate an effective teaching method. This study intends to give the students the confidence, interests, and accomplishment motive about probability and statistics field and to make a rational and creative decision-making through mathematical speculation by proposing an effective teaching method through analyzing an existing facts in school's probability and statistics field. The contents of this study are composed of four chapters. Chapter three looks into the mathematical curriculum in the elementary, middle, high school and its teaching meaning, the outline of contents, some tips on teaching and problems and presents an effective and concrete teaching method on the basis of the theoretical background in the chapter two. Chapter four is a conclusive part and gives the general improvement and intentional direction in educating the probability and statistics.

  • PDF

곡관덕트에 연결된 정사각단면 직관덕트에서 증류정상유동의 유동장내 유동특성 (Flow Characteristics of Developing Laminar Steady Flows in a Straight Duct Connected to a Square Curved Duct)

  • 손현철
    • 대한기계학회논문집B
    • /
    • 제29권5호
    • /
    • pp.545-553
    • /
    • 2005
  • In the present study, The characteristics of developing steady laminar flows of a straight duct connected to a $180^{\circ}$ curved duct were examined In the entrance region through experimental measurement. Flow characteristics such as shear stress distributions, pressure distributions and friction coefficient experimentally in a square cross-sectional straight duct by using the PIV system. For the PIV measurement by particles produced from mosquito coils particles. The experimental data were obtained at 9 points dividing the test sections by 400mm. Experimental results can be summarized as follows. Critical Reynolds number, $Re_{cr}$ which indicates transition from laminar steady flow to transition steady flow was 2,150. Shear stress per unit length on the wall was stronger than that in the fully developed flow region. This was attributed to the fact that shear stress and pressure loss in the curvature of a duct were increased. Pressure distributions were gradually decreased irrespective of Reynolds number In the whole test section. This trends were in a good agreement with the reference results. Pipe friction coefficient in the steady state flow region was calculate from method of least squares. The co-relationship between fiction coefficient and Reynolds number was established as follow; ${\lambda}=56/Re$.

유기물 첨가제와 펄스-역펄스 전착법을 이용한 구리 Via Filling에 관한 연구 (Copper Via Filling Using Organic Additives and Wave Current Electroplating)

  • 이석이;이재호
    • 마이크로전자및패키징학회지
    • /
    • 제14권3호
    • /
    • pp.37-42
    • /
    • 2007
  • 반도체 소자의 집적도가 높아짐에 따라 3D SiP에 대한 관심이 높아지고 전기도금법을 이용한 구리 via filling이 활발히 연구되어왔다. Via filling시 via 입구와 바닥에 전류밀도 차이로 인해 via 내부에 결함이 발생하기 쉽다. 여러 가지 유기물 첨가제와 전류인가 방식의 변화를 통한 via filling을 하였다. 첨가된 유기물은 PEG, SPS, JGB, PEI를 사용하였다. 유기물이 첨가된 용액을 이용하여 펄스와 역펄스 방법을 이용하여 via filling을 하였다. 유기물의 첨가에 따른 도금된 구리 입자의 크기 및 형상에 관하여 고찰하였으며 도금 후 via 시편의 단면을 FESEM으로 관찰하였다. JGB에 비하여 PEI를 사용한 경우 치밀한 도금층을 얻을 수 있었다. 2 step via filling을 사용한 경우 via filling 시간을 단축시킬 수 있었다.

  • PDF

냉각수 변화에 따른 멀티패스 밀폐식 냉각탑의 성능 (Characteristics of Closed Circuit Cooling Tower with Multi Path on Cooling Water Inlet Conditions)

  • 심규진;백승문;문춘근;윤정인;김은필;권오익
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.597-602
    • /
    • 2008
  • The experiment of performance about closed-wet cooling tower(CWCT) was conducted in this study. The test section has the cooling water that flows from top part of a heat exchanger that has an entrance of cooling water with one and multi path. The heat exchanger consists of 15.88mm tubes with ten rows and ten columns and staggered arrangement. In this experiment, heat and mass transfer coefficients and range are calculated with variations of cooling water and path. The results indicated that operating CWCT using two path have the high values of heat and mass transfer coefficients and range than one path.

  • PDF

육상 200m 경기의 곡선주로에서 직선주로 진입 시 운동학적 특성분석 (Analysis of the Kinematic Characteristics at Entrance to the Straight Course from the Curvilinear Course in the 200m-Track Game)

  • 오세진
    • 한국운동역학회지
    • /
    • 제12권2호
    • /
    • pp.51-63
    • /
    • 2002
  • 본 연구는 200m 경기의 곡선주로에서 직선주로 진입 시 나타나는 운동학적 특성을 파악하기 위해 실시하였다. 이를 위해 단거리 육상선수 4명을 대상으로 실시하였으며 곡선주로에서 직선주로로 연결되는 구간 10m를 설정하여 비디오 카메라로 촬영하였다. 공간의 좌표를 이미알고 있는 통제점 틀을 사용하여 분석구간을 모두 포함할수있도록 설치하였으며 대상자 별로 5번씩 실시하여 이중 가장 좋은 기록을 보인 동작을 실제 분석하였다. 10m 구간에서 대상자들은 평균 4.5${\pm}$0.41번의 보폭을 보이는 것으로 나타났으며, 소요시간은 1.42${\pm}$0.04sec.를 보였다. 평균보폭의 신장비는 1.25${\pm}$0.20%를 보였으며, 평균속도는 7.06${\pm}$0.19m/s를 보였다. 곡선주로에서 직선주로로 연결되는 구간에서 인체중심변위는 곡선의 안쪽 코스를 따라 이동하고 있었으며 외측(오른쪽)에 위치하는 다리의 변위가 내측(왼쪽)에 위치하는 다리의 변위보다 크게 나타났다. 좌우측 손분절 속도에서 내측에 위치하는 왼손의 속도보다는 외측에 위치하는 오른손의 속도가 다소 빠르게 나타났는데, 곡선주로에서는 외측에 위치하는 팔의 속도를 크게하여 질주방향으로 나아가는 것으로 나타났다. 어깨관절각도는 상완이 전측에 위치할 때 보다는 후측에 위치할 때가 보다 큰 각도를 보이고 있었으며 몸통측면각도는 곡선주로의 외측에 위치하는 오른발이 이지할 때 보다는 내측에 위치하는 왼발이 이지할 때 더 작은 값을 보이고 있었으며 직선주로에 근접할수록 몸통 측면각도가 작아지는 것으로 나타났다. 몸통회전각은 외측에 위치하는 오른발이 지지할 때 몸통을 전방으로 회전시켜 나아가는 것으로 나타났다.

백제 사찰 부속건물지의 구조와 기능 - 부여 왕흥사지를 중심으로 - (Studies on the Structure and Function of the Subsidiary Baekje Temple Building Attachments - Focusing on the Buyeo Wangheungsa Temple -)

  • 이상일
    • 헤리티지:역사와 과학
    • /
    • 제54권1호
    • /
    • pp.138-163
    • /
    • 2021
  • 부여 왕흥사지는 2015년까지 국립부여문화재연구소의 15차에 걸친 발굴조사를 통해 중심가람과 함께 동·서에 부속건물지를 배치하였음이 확인되었다. 특히 사역 서편구역의 경우 별도의 대지를 설정하고 내부에 다양한 건물지가 배치되었으며 동편구역에도 이러한 양상이 추정되는 대규모 사찰이었음이 밝혀졌다. 본고에서는 왕흥사지 부속건물지의 구조와 기능에 대해 평면 구조와 출토 유물을 중심으로 살펴보았다. 왕흥사지 부속건물지의 가장 큰 특징은 중심가람과 함께 초축되었다는 것이다. 이는 부속건물지가 단계적으로 확장된 능산리 사지와 차이를 보이는 점이다. 중심가람 공간의 경우, 동·서부속건물지는 독방을 사용하는 승려의 거주공간으로 추정되며 동·서건물지는 행정행위, 의례 준비, 접견 등 공적인 업무공간과 생활공간이 조합된 복합적 성격일 것이다. 중심가람 외부 공간에 대해 알아보면, 서편대지는 대지 조성 양상과 초축 수막새 출토를 고려하면 중심가람과 함께 조영되었을 것이다. 다만, 내부의 서편건물지를 살펴보면 단계별 기능 변화가 추정된다. 1단계는 제의공간으로서 별도의 진입시설과 보도시설을 갖춘 것을 알 수 있다. 이후 2단계에는 공방시설이 설치되는 등 승역의 기능이 부여된 것으로 생각된다. 마지막으로 현재 구체적인 양상을 확인되지 않았으나, 동편대지가 존재했을 가능성이 있다. 이에 대해 삼원식 구조라는 추정이 있었으나, 서편대지와 동일한 구조가 아니었을 가능성이 있어 승방 등 사찰 운영과 관련한 구조 등 다양한 시각에서 접근해야 할 것이다. 향후 사찰 구조에 대한 재검토와 추가된 발굴자료의 해석에서 부속건물지를 포함한 넓은 범위에서의 접근이 실시된다면 백제 사찰의 전반적인 모습을 복원할 수 있을 것이다.

비상여수로 입구부의 차수벽 설치 효과 분석 (Effect of Cut-off Wall near the Entrance of Spillway Tunnel)

  • 김규범;손영철;서경수
    • 지질공학
    • /
    • 제20권2호
    • /
    • pp.147-153
    • /
    • 2010
  • 투수성이 낮은 매질로 설치되는 차수벽(Cut-off wall)은 댐 지역 비상여수로 터널 지역에서 지하수의 흐름을 차단하기 위한 기능을 갖는다. 임하댐의 3개 비상여수로 터널 입구부에 차수벽 설치시 지하수 유입의 차단 효과를 평가하기 위하여 MODFLOW 모델링을 활용하였다. 규모와 설치 방향 등을 고려하여 3가지 차수벽 설치 방안이 검토되었는데, 모델링을 통하여 추정된 비상여수로 터널내로 유입되는 지하수량은 약 64.26~65.49 $m^3/day$이며, 이중에서 차수벽 구간을 통과하여 유입되는 지하수량은 약 44.08~45.31 $m^3/day$로서 방안별로 유사한 것으로 나타났다. 따라서, 본 연구지역에서는 방안별 차수 효과보다는 시공성, 환경파괴의 최소성 등을 고려하여 최적의 차수벽 설치 방안을 제안하였다.

하상여과 모형에서 수평집수관의 조도계수 (Roughness Coefficient of Collector Well Lateral in a Model Riverbed Filtration)

  • 김우철;김승현
    • 대한환경공학회지
    • /
    • 제29권2호
    • /
    • pp.176-183
    • /
    • 2007
  • 안 등이 보고한 모형 하상여과정의 수평집수관에 대한 여러 가지 측정치를 해석하기 위해 집수관에서의 흐름을 모사하는 수학적 모델을 개발하였다. 집수관 각 부위에서의 여과수 유입율 측정치와 본 연구에서 개발된 모델 예측치를 비교하였으며, 두 값은 잘 부합하였다. 이 모델을 이용하여 수평집수관 내부의 흐름에 대한 저항 즉, 조도계수를 구했고, 여러 실험조건에서 얻은 집수관의 조도 계수를 분석한 결과 집수정 유입유속이 커짐에 따라 조도계수는 증가하지만 정상적인 하상여과의 경우에는 0.012-0.015로 거의 일정함을 알 수 있었다. 또한, 집수관의 직경이 커지면 조도계수는 감소함을 알 수 있었다.

19C 필리핀 세부(Cebu) 바하이 나 바토(bahay na bato) 주택의 기후적 인자를 고려한 공간 구성에 관한 연구 (A Study on the Spatial Composition influenced by climatic conditions in 19C Bahay na Bato around Cebu city in Philippines)

  • 김영훈;임수영
    • KIEAE Journal
    • /
    • 제13권6호
    • /
    • pp.29-37
    • /
    • 2013
  • The modern town houses in Philippines has been changed through Spanish colonization over 300years and American military administration in 20C. Especially Cebu, the first contemporary capital of colonized Philippines by Spain, has various cultural characteristics and historical remains including old houses. By the economy condition in Cebu growing up, Bahay na bato, stone and wood house, has been settled for the elite or middle class of Cebu around 19C influenced by Spanish or Europe and Philippines native house called bahay kubo. Bahay na bato shows a common features, as revealed in this study, which all of them has a two stories with cut stone curtain wall and wooden beam and lintel, fronting the main street by approaching directly from street. And spatial separating also shown by setting living space to upper level instead of using storage or entrance hall called zaguan in lower level. Bahay na bato studied here shows a particular appearances in elevation, having volada and elaborate geometric or floral window pattern, also playing a role for ventilation with vetanilas below volada and main window in section. They have a rectangular plan with caida, sala, comedo, azotea almost similar to Spanish and ealier colonial Mexico style mixed with Philippines traditional style showing the strong spatial separation functionally and space wideness for party occasionally.