• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.5
• /
• pp.581-590
• /
• 2013

A research was performed for zero discharge system of waste water which is produced from energy recovery process of waste and biomass. Leachate and all kinds of waste water should be separated and integrated into three categories in addition to converting existing leachate treatment facility into waste water treatment facility as well as introducing a management system of reverse osmosis membrane facility and bioreactor landfill. Following these conditions to better water treatment process, it was likely to produce over 3,000 tons of low-grade recycling water and 2,000 tons of high-grade recycling water per day when zero discharge system of waste water is applied starting from 2016. Economical efficiency was also surveyed in total treatment fee. Present system costs 18,129 million won per year, and suggested zero discharge system would cost 15,789 million won per year.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2009

For several decades, many researchers have been involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. Despite of environmental problems(safety hazards), mechanical recycling of FRP boats, which involves shredding and grinding of the scrap FRP, is one of the simpler and more technically proven methods than incineration, reclamation or chemical ones. Because FRP is made up of reinforced fiber glass, it is very difficult to break into pieces. It also leads to secondary problem in recycling process, such as air pollution and unacceptable shredding noise level. Another serious problem of mechanical FRP recycling is very limited reusable applications for the residue. This study is to propose a new and efficient method which is more wide range applications and environment friendly waste FRP regenerating system. New system is added with the cyclone sorting machine for airborne pollutions and modified cutting system for several glass fiber chips sizes. It also has shown the FRP chip fiber-reinforced concrete and fiber-reinforced secondary concrete applications with the waste FRP boat to be more eligible than existing recycling method.

• Resources Recycling
• /
• v.4 no.4
• /
• pp.22-36
• /
• 1995

Waste tires are increased by increasing number of automobiles, which are the symbol of the mordern society. The waste tires create the environmental, visual hazard and landfill space problems. Recycling waste tires is the best way to solve the problems. The landfill space and the natural resources could by reserved by utilizing waste tires. The waste tires were utilized as whole tires, processed tires (crumb rubber) and energy. The plants for manufacturing crumb rubber also were investigated for their equipments and scales.

• Journal of Energy Engineering
• /
• v.27 no.3
• /
• pp.68-73
• /
• 2018

The cement industry is one of the rapidly growing industry in Ethiopia. The average per capita cement consumption of the country has increased from 39kg to 62kg. However, this is still way below than the global average per capita consumption of 500kg. The Ethiopian government is planning to expand its cement industry by upgrading the current cement plants and also opening of new cement plants in order to meet the future demand of the country. Currently, the number of cement plants in Ethiopia has reached to 20. By the year 2025, per capita cement consumption is expected to increase to 179kg. Recently, Ethiopia has become one of Africa's largest market for the cement industry. In addition, Ethiopia has become the major exporter of cement in the Sub-Saharan African region. The Ethiopian cement industry is highly dependent on the use of imported energy sources for its production. This situation has a significant amount of impact on the high production costs of the industry. This paper will try to review the history, production, available resources, the technologies and energy use of the Ethiopian cement industry.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.57-63
• /
• 2011

Development of alternative energy is needed as the fossil is started to be exhausted. This alternative energy should be environmental friendly and renewable. Currently, the alternative energy which gets the most attraction is hydrogen. Hydrogen can be produced by a number of different processes. Among those methods, hydrogen production in biological way is considered as the most environmental friendly method. However, productivity of biological hydrogen production is not good enough to be commercialized yet. Thus, many researchers are trying to improve productivity and yield of biohydrogen production. Here, progress in the diverse developmental approaches on biological hydrogen production, is reviewed.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.3-17
• /
• 2022

The cement industry, which is an energy-intensive and high carbon dioxide emission industry, requires strategy for carbon neutrality and sustainable development. Most domestic cement companies are generating electricity by waste heat recovery system to improve energy efficiency during cement processes; however, few studies exist on recycling of energy related to this. Certain countries with high cement production researched on modifying the conventional waste heat recovery system to maximize waste heat recovery using various methods such as applying the Rankine cycle depending on the temperature, comparing working fluids, applying two or more Rankine cycles, and combining with other industries. In this study, we reviewed the research direction for energy efficiency improvement by summarizing waste heat recovery and utilization methods in the domestic and overseas cement industries.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2016

This study is conducted to find out the problems of the public food waste recycling facility operation and its improvement. In order to save the national budget by analyzing plans to expand including operation rate for the food waste recycling facility, the alternative ways are suggested. The result can be as follows: Policy switch is required not only to save budget and stable disposal of food waste but also to promote resource recycling rather than expanding public facilities. In order to change the policy for stable and eco-friendly disposal of food waste, it is necessary to adopt semipublic system that prevent the decline of the rate of operation of private resource recycling facility. Furthermore, it is required to prepare both qualified technologies of public resource recycling and the ways of profitability secure.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.2
• /
• pp.24-32
• /
• 1998

This study examined the effects of recycling on chemical pulp fibers from multiple recycles. Firstly, water-pretreated alkaline photocopy paper was disintegrated by TAPPI standard disintegrator at room temperature. After dewatering, this pulp was dried in oven at $80^{\circ}C$ for 24hrs. A sequence of wetting, disintegrating and drying was one recycling cycle and this cyclic treatment was repeated from zero to five times. The recycled handsheet dropped to 90% of the original brightness after five cycles, and lost the most brightness in the first two cycles. However, it had a gain of 10% in opacity after five cycles. And, in this study, the method for determining residual ink(toner) content in recycled handsheets were estabilished by means of SEM-EDX and atomic absorptive photometer. The change of residual ink percentage on recycled paper showed the effect of recycling numbers on deinkability of waste paper. A slight decrease in deinkability was noted for the recycled handsheets, which may be due to the change of fiber surface free energy connected with fiber swelling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1744-1751
• /
• 2017

We are striving to strengthen environmental regulations and reduce household waste in all countries around the world. Korea is also striving for the circulation of energy resources by enacting laws to promote resource saving and recycling. The government has implemented an empty bottle deposit system for the recycling of empty bottles, but there is a limit to the collection through manpower and the reverse vending machine is not localized. In this paper, we propose a recyclable bottle recognition and classification algorithm which is essential in the reverser vending machine to promote energy resource circulation. The proposed algorithm is a complex identification algorithm using OpenCV and CNN(Convolution Neural Network). In order to evaluate the effectiveness of the proposed algorithm, we implement a classification system that operates in an reverse vending machine, so that it can easily acquire information about bottles and reverse vending machine in various devices.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.3-16
• /
• 2020

This work provides an overview of the steel production process, pretreatment and tramp elements of scraps and recycling technology of dust generated from steelmaking process. Steel is the most common metal used by mankind, with the world production of crude steel in 2018 exceeding 1.8 billion tonnes. Recycling of ferrous scraps reduces CO₂ emissions by about 42 % and saves about 60 % of energy, compared to production steel from iron ore. Steel scraps are usually recycled to both an electric arc furnace (EAF), scrap-based steelmaking and the basic oxygen furnace (BOF), in ore-based steelmaking. EAF steelmaking, which uses iron scrap as a main raw material, is changing to an energy-saving type with a device for preheating scrap. Dust generated from the steelmaking process is recycled in various ways in the steel mill to recover iron and zinc.