• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.302-317
• /
• 2017

This paper proposes a new full adder design based on pass-transistor logic that offers ultra-low power dissipation and superior variability together with low transistor count. The pass-transistor logic allows device count reduction through direct logic realization, and thus leads to reduction in the node capacitances as well as short-circuit currents due to the absence of supply rails. Optimum transistor sizing alleviates the adverse effects of process variations on performance metrics. The design is subjected to a comparative analysis against existing designs based on Monte Carlo simulations in a SPICE environment, using the 22-nm CMOS Predictive Technology Model (PTM). The proposed ULP adder offers 38% improvement in power in comparison to the best performing conventional designs. The trade-off in delay to achieve this power saving is estimated through the power-delay product (PDP), which is found to be competitive to conventional values. It also offers upto 79% improvement in variability in comparison to conventional designs, and provides suitable scalability in supply voltage to meet future demands of energy-efficiency in portable applications.

• Strategy21
• /
• 통권34호
• /
• pp.149-177
• /
• 2014

Today distant oceans around the world are regarded as a major 'global commons' for international trade and transportation. Korea is not an exception, because Korea hugely depends on sea lines of communication (SLOC) for supplying vital commodities such as food and energy resource. As a result, assuring a free and safe use of distant ocean beyond territory is also an important agenda for Korea's maritime security. However there are a number of challenges for Korea to enjoy a free and safe use of distant ocean; dangers of regional maritime conflict in East Asia, naval arms race of China and Japan, and concerns on possible decline of U.S naval presence and power projection capabilities. These factors provide a reasonable basis for Republic of Korea Navy (ROKN) to pursue capabilities for major naval operations at distant ocean in a long-term perspective toward the year 2030. The introduction of aircraft carrier and nuclear-powered submarine is a key requirement for achieving this goal. ROKN needs to acquire a 'multi-role strategic landing platform' type of light aircraft carrier, which takes a role to escort naval task force by providing air superiority at distant ocean. Additionally nuclear-powered submarine will offer ROKN a formidable power to carry out offensive missions effectively at distant ocean.

• 한국환경과학회지
• /
• 제9권6호
• /
• pp.449-454
• /
• 2000

Sustainable development has been the key concept, both in economic policies and in environmental management. On the basis of an systems ecology perspective, this suggests the sustainable development of Korea\`s natural environment and economic activity using the EMERGY evaluation. The total EMERGY use(7,730E20sej/yr) in Korea is 81 percent from imported sources, fuels and goods and services. The ratio of outside investment to attracting natural resources is already large, like other industrialized countries. Continued availability of purchased inputs at a favorable balance of EMERGY trade, currently about 2.85 to 1 net EMERGY, tis the basis for present economic activity and must decrease as the net EMERGY of purchased inputs including fossil fuels goes down. EMERGY yield ratio and environmental loading ratio were 1.23 and 20.30, respectively. The population level is already in excess of carrying capacity. Its carrying capacity for steady state on its renewable sources is only 2.2 million people, compared to 45.9 million in 1977. EMERGY sustainability index is therefore less than one, which is indicative of highly developed consumer oriented economies. Until now the development of a country has been achieved by the economic growth, but it can be sustained in the long run by the use of renewable resource systems. the efficiency of energy usage, and the transformation of the social-economic structure based on an ecological-recycling concept.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권7호
• /
• pp.282-287
• /
• 2007

정보시스템을 이용하는 금융, 무역, 의료, 에너지, 교육 등 사회 각 분야에서 정보화가 급속하게 진전되고 있다. 정보시스템에 대한 보안관리는 위험분석평가가 선행 되어야하며, 보안위험분석은 요구되는 정보보호서비스의 취약점을 해결하고 위협으로부터 시스템을 안전하게 관리할 수 있는 최선의 방법이다. 본 논문에서는 최적의 평가계획을 수립한 수 있는 평가사례기반추론 기능을 모델링하였다. 평가 사례기반추론(case-based reasoning) 기능은 보안위험분석평가를 프로젝트단위로 관리하며, 기존의 평가사례 간유사도를 평가하고, 유사한 평가 사례를 바탕으로 최적의 보안위험분석평가 계획을 수립할 수 있다.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.122-128
• /
• 2014

When evaluating effectiveness of a program, there is a tendency to simply compare the performances of the treated before and after the program or to compare the differences in the performances of the treated and the untreated before-after the program. However, these ways of evaluating effectiveness have problems because they can't account for environmental changes affecting the treated and/or effects coming from the differences between the treated and the untreated. Therefore, in this paper, panel data analysis (fixed effects model) is suggested as a means to overcome these problems and is utilized to evaluate the effectiveness of fusion technology program conducted by Ministry of Trade, Industry and Energy, Korea. As a result, it turns out that the program has definitely positive impacts on the beneficiary in terms of sales, R&D expenditure, and employment.

• 대한안전경영과학회지
• /
• 제18권1호
• /
• pp.111-118
• /
• 2016

KC Mark is one of the country's integrated legal force to the minimum mandatory certification mark system for safety. That is absolutely needed for manufacturing and sales of goods in Korea. This thesis intended to see what is prevalent for both imports and domestic products for illegal and defect and rebuild the ecosystem as soon as possible for the healthy development through public awareness. In this theses point out the seriousness of the problem based on the various kinds of press releases, data of KCA(Korea Consumer Agency), MOTIE(Ministry of Trade, Industry and Energy) and KCA(Korea Customs Service) to the problem of certification system of KC mark and propose a solution to that issue. This study is considered to make befit the nation's place in the world and sustainable development is possible about the system of certification KC. This study expect more research on this issue in order to make enhance the confidence of KC mark.

• 한국주거학회논문집
• /
• 제26권5호
• /
• pp.113-121
• /
• 2015

Several housing improvement programs for low-income have done by Ministry of Health & Welfare, Ministry of Trade, Industry & Energy, Ministry of Security and Public Administration, Ministry of Environment, and Ministry of Land, infrastructure and Transport up to now. Each program practiced separately based on each agency's function and territory, but there are also negative opinion on beneficiary duplication, beneficiary omission, and the inefficient execution of the government budget. This study analyzes the housing improvement programs of each agency on the aspects of coordination, and suggests the integration system with coordination and delivery system. We selected 3 indexes such as similarity, integration effect and availability for integration system and analyzed the effects of integrated programs into one based on cost, repair effect and management. We proposed that the similar housing improvement programs of each agency should be coordinated for integration. But it is not easy to integrate similar programs into one program, therefore similar programs which support the house owner are needed to integrate into housing benefit except same beneficiary who owned own house.

• Smart Structures and Systems
• /
• 제14권1호
• /
• pp.1-16
• /
• 2014

In this work, we address the so-called sensor reachback problem for Wireless Sensor Networks, which consists in collecting the measurements acquired by a large number of sensor nodes into a sink node which has major computational and power capabilities. Focused on applications such as Structural Health Monitoring, we propose a cooperative communication protocol that exploits the spatio-temporal correlations of the sensor measurements in order to save energy when transmitting the information to the sink node in a non-stationary environment. In addition to cooperative communications, the protocol is based on two well-studied adaptive filtering techniques, Least Mean Squares and Recursive Least Squares, which trade off computational complexity and reduction in the number of transmissions to the sink node. Finally, experiments with real acceleration measurements, obtained from the Canton Tower in China, are included to show the effectiveness of the proposed method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.200-203
• /
• 2007

넓은 에너지 갭의 물질인 탄화규소(4H)기판을 사용하여, 초고내압을 위한 접합장벽 쇼트키 구조의 소자를 설계하여 제작하였다. 측정결과로써 소자의 역방향 I-V 특성은 1000V 이상의 항복전압을 보였고 p-grid의 설계 최적 길이는 $3{\mu}m$ 간격이였다. 이 연구에서는 제작한 소자의 공정 조건 파라미터들을 사용하여 I-V 특성을 모델링 하였고 I-V 특성 파라미터들을 추출하여 실제 소자 파라미터와 비교, 분석하였다.