• Environmental and Resource Economics Review
• /
• v.31 no.3
• /
• pp.393-417
• /
• 2022

Using hourly SMP data from 2016 to 2020, this paper measures the weekly realized volatility and investigates the main force of its determinants. To this end, we extend the Bayesian variable selection by incorporating the regime-switching model which identifies important variables among a large number of predictors by regimes. We find that the increase in coal and nuclear generation, as well as solar power, reinforce the SMP volatility in both high volatility and low volatility regime. In contrast the increase in gas generation and gas price decrease SMP volatility when SMP volatility is high. These results suggest that the expansion of renewable energy according to 2050 Carbon Neutrality or energy transition policies increases SMP volatility but the increase in the gas generation or reduction of coal generation might offset its impact.

• Journal of Powder Materials
• /
• v.30 no.6
• /
• pp.463-469
• /
• 2023

Aluminum alloys, known for their high strength-to-weight ratios and impressive electrical and thermal conductivities, are extensively used in numerous engineering sectors, such as aerospace, automotive, and construction. Recently, significant efforts have been made to develop novel aluminum alloys specifically tailored for additive manufacturing. These new alloys aim to provide an optimal balance between mechanical properties and thermal/electrical conductivities. In this study, nine combinatorial samples with various alloy compositions were fabricated using direct energy deposition (DED) additive manufacturing by adjusting the feeding speeds of Al6061 alloy and Al-12Si alloy powders. The effects of the alloying elements on the microstructure, electrical conductivity, and hardness were investigated. Generally, as the Si and Cu contents decreased, electrical conductivity increased and hardness decreased, exhibiting trade-off characteristics. However, electrical conductivity and hardness showed an optimal combination when the Si content was adjusted to below 4.5 wt%, which can sufficiently suppress the grain boundary segregation of the α-Si precipitates, and the Cu content was controlled to induce the formation of Al₂Cu precipitates.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.35-47
• /
• 2024

Objectives: Many cases of lung cancer have been reported by school kitchen workers as occupational cancer. Twenty-eight schools in Gyeongsangnam-do Province were selected to evaluate the effect of improved kitchen ventilation systems. Ventilation characteristics before and after renovation were compared and design techniques were identified. Methods: In the design stage for kitchen ventilation systems, expert intervention was used to improve the designs. Ventilation characteristics and air quality were evaluated before and after the renovations. Hood face velocity and fan flow rate were measured and the smoke visualization technique was used to evaluate the capability of protecting worker's breathing zone. The concentrations of PM_0.3 were measured at points not adjacent to cooking equipment because these concentrations fluctuate greatly. Results: Mean hood face velocity increased from 0.29 m/s before renovation to 0.7m/s after renovation. The concentrations of PM_0.3 showed a roughly 95% reduction. Concentrations of CO showed more than a 75% reduction. Smoke visualization showed greater protection of workers' breathing zone. Conclusions: Advanced design techniques for school kitchen ventilation systems were applied to renovate old kitchen ventilation systems. The performance of the new kitchen ventilation systems was nearly excellent. Further improvement of design techniques is still needed, however.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.114-122
• /
• 2024

NF₃, Chamber cleaning gas, has a high Global Warming Potential (GWP) of 17,000, causing significant greenhouse effects. Reducing gas usage during the cleaning process is crucial while increasing the cleaning Rate and reducing cleaning standard deviation (Stdev). In a previous study with a 6-inch PECVD chamber, a multiple linear regression analysis showed that Power and Pressure had no significant effect on the cleaning Rate because of their P-values of 0.42 and 0.68. The weight for Flow is 11.55, and the weights for Power and Pressure are 1.4 and 0.7. Due to the limitations of the research equipment, which differed from those used in actual industrial settings, it was challenging to assess the effects in actual industrial environment. Therefore, to show an actual industrial environment, we conducted the cleaning process on a 12-inch PECVD chamber, which is production-level equipment, and quantitatively analyzed the effects of each variable. Power, Pressure, and NF3 Flow all had P-values close to 0, indicating strong statistical significance. The weight for Flow is 15.68, and the weights for Power and Pressure are 4.45 and 5.24, respectively, showing effects 3 and 7 times greater than those with the 6-inch equipment on the cleaning rate. Additionally, we analyzed the cleaning Stdev and derived that there is a trade-off between increasing the cleaning Rate and reducing the cleaning Stdev.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.874-876
• /
• 2005

임베디드 시스템에서의 캐시 메모리는 시스템의 성능에 큰 영향을 줄뿐만 아니라 전체 에너지 소비 중 $50\%$ 정도를 소비하고 있어 캐시 메모리의 성능과 에너지 소비는 큰 관심거리 중 하나다. 공정의 미세화로 캐시 메모리의 에너지 소비 중 누수 전류에 의한 에너지 소비의 비중이 더 커지고 있어, 정적 에너지 소비를 줄이기 위한 다양한 연구가 진행 중이다. 에너지 절약과 성능 향상은 손익 상쇄(Trade-off)관계에 있어 두 가지 목표를 동시에 달성하기는 힘들다. 본 논문에서는 성능 향상을 위하여 여러 가지 캐시 구조중 접속 속도가 가장 빠른 직접 사상 캐시를 사용하고, 완전 연관 캐시를 사용하여 직접 사상 캐시의 단정을 보완 할 수 있는 백업 캐시 시스템을 제안한다. 시스템 성능을 향상 시키면서 백업 캐시의 누수에너지를 절약하기 위해 직접 사상 캐시와 완전 연관 캐시를 서로 다른 한계 전압을 가지는 SRAM으로 구성한다. 직접 사상 캐시는 낮은 한계 전압의 SRAM로 구성하여 높은 성능을 내고, 완전 연관 캐시는 직접 사상 캐시에 비해 상대적으로 속도는 느리지만 누수 에너지가 적은 높은 한계 전압을 가지는 SRAM으로 구성하여 직접 사상 캐시를 보완하는 역할을 할 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.302-317
• /
• 2017

This paper proposes a new full adder design based on pass-transistor logic that offers ultra-low power dissipation and superior variability together with low transistor count. The pass-transistor logic allows device count reduction through direct logic realization, and thus leads to reduction in the node capacitances as well as short-circuit currents due to the absence of supply rails. Optimum transistor sizing alleviates the adverse effects of process variations on performance metrics. The design is subjected to a comparative analysis against existing designs based on Monte Carlo simulations in a SPICE environment, using the 22-nm CMOS Predictive Technology Model (PTM). The proposed ULP adder offers 38% improvement in power in comparison to the best performing conventional designs. The trade-off in delay to achieve this power saving is estimated through the power-delay product (PDP), which is found to be competitive to conventional values. It also offers upto 79% improvement in variability in comparison to conventional designs, and provides suitable scalability in supply voltage to meet future demands of energy-efficiency in portable applications.

• Strategy21
• /
• s.34
• /
• pp.149-177
• /
• 2014

Today distant oceans around the world are regarded as a major 'global commons' for international trade and transportation. Korea is not an exception, because Korea hugely depends on sea lines of communication (SLOC) for supplying vital commodities such as food and energy resource. As a result, assuring a free and safe use of distant ocean beyond territory is also an important agenda for Korea's maritime security. However there are a number of challenges for Korea to enjoy a free and safe use of distant ocean; dangers of regional maritime conflict in East Asia, naval arms race of China and Japan, and concerns on possible decline of U.S naval presence and power projection capabilities. These factors provide a reasonable basis for Republic of Korea Navy (ROKN) to pursue capabilities for major naval operations at distant ocean in a long-term perspective toward the year 2030. The introduction of aircraft carrier and nuclear-powered submarine is a key requirement for achieving this goal. ROKN needs to acquire a 'multi-role strategic landing platform' type of light aircraft carrier, which takes a role to escort naval task force by providing air superiority at distant ocean. Additionally nuclear-powered submarine will offer ROKN a formidable power to carry out offensive missions effectively at distant ocean.

• Journal of Environmental Science International
• /
• v.9 no.6
• /
• pp.449-454
• /
• 2000

Sustainable development has been the key concept, both in economic policies and in environmental management. On the basis of an systems ecology perspective, this suggests the sustainable development of Korea\`s natural environment and economic activity using the EMERGY evaluation. The total EMERGY use(7,730E20sej/yr) in Korea is 81 percent from imported sources, fuels and goods and services. The ratio of outside investment to attracting natural resources is already large, like other industrialized countries. Continued availability of purchased inputs at a favorable balance of EMERGY trade, currently about 2.85 to 1 net EMERGY, tis the basis for present economic activity and must decrease as the net EMERGY of purchased inputs including fossil fuels goes down. EMERGY yield ratio and environmental loading ratio were 1.23 and 20.30, respectively. The population level is already in excess of carrying capacity. Its carrying capacity for steady state on its renewable sources is only 2.2 million people, compared to 45.9 million in 1977. EMERGY sustainability index is therefore less than one, which is indicative of highly developed consumer oriented economies. Until now the development of a country has been achieved by the economic growth, but it can be sustained in the long run by the use of renewable resource systems. the efficiency of energy usage, and the transformation of the social-economic structure based on an ecological-recycling concept.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.7
• /
• pp.282-287
• /
• 2007

Information society is dramatically developing in the various areas of finance, trade, medical service, energy, and education using information system. Evaluation for risk analysis should be done before security management for information system and security risk analysis is the best method to safely prevent it from occurrence, solving weaknesses of information security service. In this paper, Modeling it did the evaluation-base CBD function it will be able to establish the evaluation plan of optimum. Evaluation-based CBD(case-based reasoning) functions manages a security risk analysis evaluation at project unit. it evaluate the evaluation instance for beginning of history degree of existing. It seeks the evaluation instance which is similar and Result security risk analysis evaluation of optimum about under using planning.