• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.345-348
• /
• 2004

For practical applications, the evaluation of reliability or endurance of HTS conductors is necessary. The mechanical properties and the critical current, $I_c$, of multifilamentary Bi-2223 superconducting tapes, externally reinforced with stainless steel foils, subjected to high cycle fatigue loading in the longitudinal direction were investigated at 77K. The S-N curves were obtained and its transport property was evaluated with the increase of repeated cycles at different stress amplitudes. The effect of the stress ratio, R, on the $I_c$ degradation behavior under fatigue loading was also examined considering the practical application situation of HTS tapes. Microstructure observation was conducted in order to understand the L degradation mechanism in fatigued Bi-2223 tapes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.122-122
• /
• 2010

A Static Induction Thyristor (SI-Thyristor) has a great potential as power semiconductor switch for pulsed power or high voltage applications with fast turn-on switching time and high switching stress endurance (di/dt, dV/dt). However, due to direct commutation between gate driver and SI-Thyristor, it is difficult to design optimal gate driver at the aspect of impedance matching for fast gate current driving into internal SI-Thyristor. Thus, to penetrate fast positive gate current into steady off state of the SI-Thyristor, it is proposed and proceeded the internal impedance calculation of the SI-Thyristor at steady off state with the gate driver while switching conditions that are indicated applied gate voltage, $V_{GK}$ and applied high voltage across anode and cathode, $V_{AK}$.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.3
• /
• pp.149-157
• /
• 2017

In this paper, we propose BCMR (Block Classification with Monitor and Restriction) to ensure the isolation and to reduce the interference of blocks between a garbage collection and a wear leveling. The proposed BCMR monitors an endurance variation of blocks during the garbage collection and detects hot blocks by making a restriction condition based on this information. The proposal induces a block classification by its update frequency for the garbage collection and the wear leveling, so we will get a prolonged lifetime of NAND flash memory systems. In a performance evaluation, BCMR prolonged the lifetime of NAND flash memory systems by 3.95%, on average and reduced a standard deviation per block by 7.4%, on average.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.2
• /
• pp.145-151
• /
• 2014

Recently, the growing demand for weight reduction and improved structure durabilityfor commercial vehicles has led to active research into the development and application of suitablecomposite materials. This studysuggests abimaterial composite frame produced by apultrusion process to replace steel frames. We focused on the development of a composite frameconsisting of two types of materialsby mixing anorthotropic material with anisotropic material. The inside layer consisted of an aluminum pipe, and the outside layer was composed of a glass fiber pipe. To determine the strength and failure mechanisms of the composite material, tensile tests, shear tests, and three-point bending tests were conducted, followed by fatigue tests. After static testing, the fatigue tests were conducted at a load frequency of 5 Hz, a stress ratio (R) of 0.1, and an endurance limit of $10^6$ for the S-N curve. The resultsshowed that the failure modes were related to both the core design and the laminating conditions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.1-7
• /
• 2011

The UAV(Unmanned Aerial Vehicle) which is remotely operating with long endurance in high altitude must have a very reliable propulsion system. The precise fault diagnostic system of the turboprop engine as a propulsion system of this type UAV can promote reliability and availability. This work proposes a diagnostic method which can identify the faulted components from engine measuring parameter changes using Fuzzy Logic and quantify its faults from the identified fault pattern using Neural Network Algorithms. It is found by evaluation examples that the proposed diagnostic method can detect well not only single type faults but also multiple type faults.

• Journal of the Korean Society of Safety
• /
• v.21 no.5 s.77
• /
• pp.17-21
• /
• 2006

In this study, SPCC cross-tension type specimens produced under various spot welding conditions were tensile and fatigue tested. Decrease of 2 kA in normal current condition of 10 kA caused a large amount of reduction in both static joining strength and fatigue life. And 2 kA increase resulted in increase of static joining strength and an increase in low cycle regime but a decrease in high cycle regime, revealing the fact that fatigue strength rather than static joining strength would be a major factor during design process in view of the body endurance. As a results of estimating the fatigue lifetimes of various types of spot weld specimens. equivalent stress intensity factor is the proper parameter for predicting the lifetimes of various types of specimens. which can be expressed as ${\Delta}K_{eq}(N/nm^{1.5})=11550N^{-0.36}_{f}$.

• Women's Health Nursing
• /
• v.12 no.1
• /
• pp.37-46
• /
• 2006

Purpose: The purpose of this study was to investigate the effects of an exercise program on physical function and quality of life of mastectomy patients. Method: This study was conducted from October, 2004 to June, 2005. The subjects consisted of 60 patients with breast cancer(30 each in the experimental and control groups). The subjects in the experimental group participated in an exercise program for 16 weeks. Evaluation was performed four times in both the experimental and control group. Results: The results revealed an increase in physical function in the experimental group including wrist circumstance, function of shoulder joint, stretching, and upper endurance. Also, an increase in function scales in quality of life were significantly higher in the experimental group than the control group. In addition subjective comments on how they felt after participating in the exercise program were good in the experimental group. Conclusion: The 16-week exercise program showed a large positive effect on physical function and quality of life of breast cancer patients after a mastectomy.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.160-167
• /
• 2012

This paper is concerned with a particular fracture mechanics parameter ${\Delta}K_{th}$, known as the 'threshold stress intensity range', or 'fatigue threshold'. This threshold ${\Delta}K_{th}$ constitutes, as it were, a hinge between the notion of crack initiation and the notion of crack growth. It has often been thought that, like the endurance limit, it could be an intrinsic criterion of the material. The study was conducted on a SA-508 pressure vessel steel used in the nuclear power industry. This material exhibits a typical threshold effect in the range of the crack growth rates which were determined; that is, below approximately $da/dN=10^{-6}mm/cycle$, the slope of the da./dN versus ${\Delta}K$ curve is almost vertical. The value of ${\Delta}K_{th}$ was determined at a growth rate of $10^{-7}$ mm/cycle according to the ASTM Standard for threshold testing. The fatigue threshold values are in the range 21 $kg/mm^{3/2}$ to 12 $kg/mm^{3/2}$ depending on the stress ratio effect.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.475-486
• /
• 2002

Orthopaedic manual therapy(OMT) includes knowledge in arthokinematic, biological, behavioral, biomechanical, patholology, anatomy, and clinical science. it allows proper approach to patient evaluation and program development and relieves joint and soft tissue lesions. The OMT has sports injurys, traumatic, developmental, and neuromusculoskeletal disorders of acute and chronic states, and prevention of dysfunction as well as the development, improvement, restoration, or maintenance of joint and muscular mobility, stability, relaxation, strenth, endurance, balance, and functional skills. The purpose of this article has to define and clarify the change and development of basic concepts of orthopaedic manual therapy. OMT is ancient in origin. The book of ' Manipulation Past and Present ' contains pictures recording various types of joint mobilization by Hippocrates. Recently, there are many kinds of manual therapeutic maneuvers to assess and relieve joint and soft tissue lesions developed by James Cyriax, John McM Mennell, Brian R Mullign, Robin McKenzie, Freddy Kaltenborn, Geoffrey Maitland, and Ola Grimsby.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.295-298
• /
• 2005

This paper is concerned with the precision material property measurement of a micro metal thin foil that is used in MEMS technology. Since these MEMS components require great precision and accuracy, evaluation of reliability such as the lift cycle endurance test, impact test, and residual stress test is necessary for these components. However, in practice, real reliability tests are not easy to perform due to consideration of various factors. Rather than actual testing, it would be much easier to evaluate the reliability of components by the analytical approach. Although the analytical method is utilized by software tools, it is obviously necessary to acquire fundamental properties of materials through real test methods. In this paper, the oriented mechanical properties of aluminum thin foil are measured by nano scale material property measurement system.