• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.169-173
• /
• 2014

In order to satisfy user's requirements of needs for various services and to efficiently use of frequency, a communication system using one platform can support many communication services. Tunable filters must be used in the front end of broadband communication systems which provide and support various communication methods. In this paper we design and implement a filter bank to verify the feasibility of cavity tunable filter with the operation frequency of 800 MHz ~ 1600 MHz. The filter bank is composed of five bandpass filters and each bandpass filter has the same operation frequency band of the tunable filter. The implemented filter bank has the maximum insertion loss of 0.326 dB, the bandwidth of 37 MHz ~ 84 MHz, and the attenuation of minimum 19.974dB and mximum 37.812dB at the band edge ${\pm}60MHz$ over the operating frequency band.

• Journal of Biomedical Engineering Research
• /
• v.40 no.5
• /
• pp.206-214
• /
• 2019

Surgical methods and associated precision systems have been developed, but surgical procedures that require precise location and fine manipulation of the lesion remain a limitation. The combination of precision robot manipulation technology and 3D medical image navigation technology overcomes the limitations of minimally invasive surgery (MIS) and enables a more stable and successful operation. Surgical robots are surgical robots such as da Vince, and surgical robots using industrial robotic arms. There are various developments and researches of medical robots. In recent medical robot development, a new type of surgical robot based on an industrial robot arm capable of easily replacing the end effector according to the user's needs is being actively developed at home and abroad. Therefore, in this study, we developed safety and performance evaluation guideline for micro - surgical robots based on open robot platform using general purpose robot arm to help quality control of the medical device.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.20
• /
• pp.129-150
• /
• 2003

Software license agreements, to be useful in the mass market, could not be individually negotiated, and had to be standardized and concise. The software license agreement needs to be presented to the licensee-users in a fashion that would allow for mass distribution of software, also for it to enforceable, that would draw the users' attention to the terms and conditions under which the publisher allowed the use of the software. These needs have been accomplished, with or without fail, through so called the "shrink-wrap licenses" Shrink-wrap licenses purpose to transfer computer softwares to their users by defining the terms and conditions of use of the software without implicating the "first sale doctrine" of the Copyright Act. These shrink-wrap licenses have become essential to the software industry. However, in USA, the law applicable to these licenses has been unclear and unsettled. Courts have struggled to develop a coherent framework governing their enforceability. Meanwhile, the National Conference of Commissioners on Uniform State Laws ("NCCUSL") in USA promulgated the Uniform Computer Information Transaction Act ("UCITA") governing contracts for computer information transaction on July 29, 1999. One clear objective of UCITA was to settle the law governing the enforceability of shrink-wrap licenses. In these respects, this paper first introduces the various forms that shrink-wrap licenses take(at Part II. Section 1.), and explains the main advantages of them(at Part II. Section 2.) Here it shows how shrink-wrap licenses value themselves for both software publishers and users, including that shrink-wrap licenses are a valuable contracting tool because they provide vital information and rights to software users and because they permit the contracting flexibility that is essential for today's software products. Next, this paper describes the current legal framework applicable to shrink-wrap licenses in USA(at Part III). Here it shows that in USA the development of case law governing shrink-wrap licenses occurred in two distinct stages. At first stage, judicial hostility toward shrink-wrap licenses marked such that they were not enforced pursuant to Article 2 of the Uniform Commercial Code. At second stage, courts began to recognize the pervasiveness of shrink-wrap licenses, their indispensability to the rapidly expanding information technology industry, and the urgent need to enforce such licenses in order to maintain low prices for consumers of computer hardware or software, resulting in the recognition of shrink-wrap licenses. Finally, in view of the importance of UCITA, this paper examines how it will affect the enforceability of shrink-wrap licenses(at Part IV). The drafters of UCITA, as well as the scholars and practitioners who have criticized it, agree that it validates shrink-wrap licenses, provided certain procedural protections are afforded to purchasers. These procedural protections include the licensee end-user must (i) manifest his assent to the shrink-wrap license, (ii) have an opportunity to review the shrink-wrap license, (iii) have a right to return the product without costs.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.41-50
• /
• 2006

It is generally regarded a design system in post-industrial society, which products designed by in-house designers or design consultancy are manufactured in factory and distributed in market for the consumer. Although it is treated an old design system in traditional society, the traces of vernacular design has been remaining in the state of adopted to the periodical needs in these days, also proving the attribute of design culture to constitute human's material environment as well as existing design systems. There were discovered various design artifacts in daily surroundings vary from the established design in several manners, user modifications or manufactures in everyday lives formalized them. It was approached a case study that analyze the changes of artifact configuration and designer/user context and creation process of the non-professional design artifacts, Creativity Template Theory and ACM(Artifact Context Model) have been utilized for the analysis model. From the analysis result, It assume that the everyday artifacts may be ordinary but extra-ordinary including particular ideas and identity represented by everyday designers or users. Beside these characteristics induce the potentiality that reflect on creative motives for the designers or a complementary artifact generator filling up with drawbacks in established design system. The everyday design domain, various explorations and alternatives are made, is seems to be another design practice domain dissimilar to the one in the industry-based design. Moreover it provides an more easily accessability for the approaching user-friendly design, user customization because they conduct the reliable modeling of consumer and end-user. Finally, based on the exploratory study regarding interpretation of context and configuration in the everyday artifacts, new approach for the design process and design education through more detailed cognitive modeling of everyday designers will be a further study.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.6
• /
• pp.77-91
• /
• 2013

The researcher noted the fact that wetland users are more and more diversified while people are more conscious of their ecological importance. Wetlands tend to be very sensitive in ecological terms, and therefore, they can hardly accommodate their users' needs indefinitely. With such basic perception in mind, the purpose of this study was to survey wetland users' eco-consciousness, determine their traits, analyze the corelation between their traits and preferences of wetland amenities, and thereby, provide the data useful to planning of an effective wetland management policy. To this end, the researcher sampled nation's largest wetland, Upo Marsh located in Changnyeong for a questionnaire survey. Wetland users' eco-consciousness was measured, using Dunlap's NEP (New Ecological Paradigm) approved by many researchers. Wetland users' preferences of the wetland amenities were measured, centered around 11 amenity types observed commonly at the domestic wetlands. As a result of the survey conducted in October, 2012, a total of 228 effective samples were acquired. Wetland users' eco-consciousness was higher than normal, scoring 3.45 on the 5-point scale consisting of 5 sub-scales. In particular, users were more conscious of 'the possibility of an eco-crisis,' while being less conscious of 'ejection of exemptionalism.' As a result of classifying the users into 3 sub-groups in reference to their eco-consciousness and analyzing their preferences of amenities comparatively, significant differences were found in all 3 sub-areas. In particular, the sub-group most eco-conscious tended to prefer the learning amenities, but the least eco-conscious sub-group tended to prefer the utilities. As a result of the post-hoc test, it was found that most and normal eco-conscious sub-groups were more or less homogeneous, while the least eco-conscious sub-group was significantly different from the former 2 sub-groups in terms of eco-consciousness. As the wetland users were found to be diversified in terms of their eco-consciousness, it is necessary to plan the wetland management policies in consideration of such differences. However, it is perceived that the wetland amenities need to be built to meet the more eco-conscious users.

• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.31-42
• /
• 2007

Energy supply is increasingly showing up as a major issue for electricity supply, transportation, settlement, and process heat industrial supply including hydrogen production. Nuclear power is part of the solution. For electricity supply, as exemplified in Finland and France, the EPR brings an immediate answer; HTR could bring another solution in some specific cases. For other supply, mostly heat, the HTR brings a solution inaccessible to conventional nuclear power plants for very high or even high temperature. As fossil fuels costs increase and efforts to avoid generation of Greenhouse gases are implemented, a market for nuclear generated process heat will be developed. Following active developments in the 80's, HTR have been put on the back burner up to 5 years ago. Light water reactors are widely dominating the nuclear production field today. However, interest in the HTR technology was renewed in the past few years. Several commercial projects are actively promoted, most of them aiming at electricity production. ANTARES is today AREVA's response to the cogeneration market. It distinguishes itself from other concepts with its indirect cycle design powering a combined cycle power plant. Several reasons support this design choice, one of the most important of which is the design flexibility to adapt readily to combined heat and power applications. From the start, AREVA made the choice of such flexibility with the belief that the HTR market is not so much in competition with LWR in the sole electricity market but in the specific added value market of cogeneration and process heat. In view of the volatility of the costs of fossil fuels, AREVA's choice brings to the large industrial heat applications the fuel cost predictability of nuclear fuel with the efficiency of a high temperature heat source tree of Greenhouse gases emissions. The ANTARES module produces 600 MWth which can be split into the required process heat, the remaining power drives an adapted prorated electric plant. Depending on the process heat temperature and power needs, up to 80% of the nuclear heat is converted into useful power. An important feature of the design is the standardization of the heat source, as independent as possible of the process heat application. This should expedite licensing. The essential conditions for success include: ${\bullet}$ Timely adapted licensing process and regulations, codes and standards for such application and design ${\bullet}$ An industry oriented R&D program to meet the technological challenges making the best use of the international collaboration. Gen IV could be the vector ${\bullet}$ Identification of an end user(or a consortium of) willing to fund a FOAK

• Journal of Intelligence and Information Systems
• /
• v.27 no.4
• /
• pp.49-71
• /
• 2021

Users who intend to utilize knowledge to actively solve given problems proceed their jobs with cross- and sequential exploration of associated knowledge related each other in terms of certain criteria, such as content relevance. A knowledge map is the diagram or taxonomy overviewing status of currently managed knowledge in a knowledge-base, and supports users' knowledge exploration based on certain relationships between knowledge. A knowledge map, therefore, must be expressed in a networked form by linking related knowledge based on certain types of relationships, and should be implemented by deploying proper technologies or tools specialized in defining and inferring them. To meet this end, this study suggests a methodology for developing the knowledge graph-based knowledge map using the Graph DB known to exhibit proper functionality in expressing and inferring relationships between entities and their relationships stored in a knowledge-base. Procedures of the proposed methodology are modeling graph data, creating nodes, properties, relationships, and composing knowledge networks by combining identified links between knowledge. Among various Graph DBs, the Neo4j is used in this study for its high credibility and applicability through wide and various application cases. To examine the validity of the proposed methodology, a knowledge graph-based knowledge map is implemented deploying the Graph DB, and a performance comparison test is performed, by applying previous research's data to check whether this study's knowledge map can yield the same level of performance as the previous one did. Previous research's case is concerned with building a process-based knowledge map using the ontology technology, which identifies links between related knowledge based on the sequences of tasks producing or being activated by knowledge. In other words, since a task not only is activated by knowledge as an input but also produces knowledge as an output, input and output knowledge are linked as a flow by the task. Also since a business process is composed of affiliated tasks to fulfill the purpose of the process, the knowledge networks within a business process can be concluded by the sequences of the tasks composing the process. Therefore, using the Neo4j, considered process, task, and knowledge as well as the relationships among them are defined as nodes and relationships so that knowledge links can be identified based on the sequences of tasks. The resultant knowledge network by aggregating identified knowledge links is the knowledge map equipping functionality as a knowledge graph, and therefore its performance needs to be tested whether it meets the level of previous research's validation results. The performance test examines two aspects, the correctness of knowledge links and the possibility of inferring new types of knowledge: the former is examined using 7 questions, and the latter is checked by extracting two new-typed knowledge. As a result, the knowledge map constructed through the proposed methodology has showed the same level of performance as the previous one, and processed knowledge definition as well as knowledge relationship inference in a more efficient manner. Furthermore, comparing to the previous research's ontology-based approach, this study's Graph DB-based approach has also showed more beneficial functionality in intensively managing only the knowledge of interest, dynamically defining knowledge and relationships by reflecting various meanings from situations to purposes, agilely inferring knowledge and relationships through Cypher-based query, and easily creating a new relationship by aggregating existing ones, etc. This study's artifacts can be applied to implement the user-friendly function of knowledge exploration reflecting user's cognitive process toward associated knowledge, and can further underpin the development of an intelligent knowledge-base expanding autonomously through the discovery of new knowledge and their relationships by inference. This study, moreover than these, has an instant effect on implementing the networked knowledge map essential to satisfying contemporary users eagerly excavating the way to find proper knowledge to use.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3052-3062
• /
• 1997

An Information Retrieval (IR) is to retrieve relevant information that satisfies user's information needs. However a major role of IR systems is not just the generation of sets of relevant documents, but to help determine which documents are most likely to be relevant to the given requirements. Various attempts have been made in the recent past to use syntactic analysis methods for the generation of complex construction that are essential for content identification in various automatic text analysis systems. Unfortunately, it is known that methods based on syntactic understanding alone are not sufficiently powerful to Produce complete analyses of arbitrary text samples. In this paper, we present a document ranking method based on two-level ranking. The first level is used to retrieve the documents, and the second level to reorder the retrieved documents. The main keywords used in the first level can be defined as nouns and/or compound nouns that possess good document discrimination powers. The sub-keywords used in the second level can be also defined as adjectives, adverbs, and/or verbs that are not main keywords, and function words. An empirical study was conducted from a Korean encyclopedia with 23,113 entries and 161 Korean natural language queries collected by end users. 850% of the natural language queries contained sub-keywords. The two-level document ranking methods provides significant improvement in retrieval effectiveness over traditional ranking methods.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.239-244
• /
• 2008

We lead a life in our community, beginning a new relationship with a stranger or maintaining or stopping existing relationships. Relationships with others are sustained through social activities based on communication. Generally speaking, by exchanging feelings and information through communication, relationships are formed and continued, and strengthened through active communication As a result of the development of technologies and information technology over the recent 10 years, a mobile phone has stood as a communication channel, and now it has become such a universal, and highly intimate and important means of communication that almost all the Koreans use more often than wired phones. Today, people have their communication channel available for others, by using a mobile phone at any time and anywhere. Like this, mobile phones have been playing a key role in helping people maintain, repair and strengthen their personal relationship, but from the perspective of personal relationship management, they still remain as an aid to help communication, failing to provide a positive help for actual relationship management. This study was designed to provide services supporting user's personal relationship management, focusing on the use of mobile phones as a major tool of communication, aiming to enable users to understand current state of their relationship and make relationship management efforts, or communication behaviors, by informing who needs communication, on the basis of data on mobile phone calls. To this end, the study established a method to extract intimacy between users and callers and develop a prototype of services supporting personal relationship management, using relationship characteristics in terms of mobile communication.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.1
• /
• pp.115-143
• /
• 2020

This study conducted a survey on the current status and satisfaction of libraries participating in the opening hours support project in order to continue it to meet the purpose of improving information access and life welfare. To this end, a questionnaire and interview survey were conducted for those in charge of opening hours for each library, and the results are as follows. First, the opening hours support project is a project that needs a strategy that fits the characteristics of the region and the environment. Therefore, it is necessary to consider operating independently rather than relying on national support in the future through the preparation of regional-oriented operation plans. Second, it is necessary to establish a flexible operating model for opening hours that both employees and users can understand. Third, it is necessary to prepare an organizational operation plan that requires both duties and responsibilities along with the rights equivalent to existing regular employees. Fourth, in order for national public libraries in Korea to develop and implement a consistent policy for specific policies and projects, it is necessary to unify the separate public library operating system in the future. Fifth, it is necessary to prepare education and guidelines for the continuity and stable operation of the project, and to activate services other than labor costs, such as support for improving the space for the user's pleasant use.