• 대한가정학회지
• /
• 제39권2호
• /
• pp.15-24
• /
• 2001

The purpose of this research was to investigate the factors affecting the labor supply of married women. Based on the theoretical review of the process for the labor supply of married women and the review of previous research, the emperical specification was deduced as a function of husband's income, assets, education and age, the number of children and home ownership. The data of this research was collected with questionnaire in 1998. The data consisted of the answers by 200 married women. For the measurement of the emperical specification, Logit, Tobit, and Selection Bias Corrected Regression which modifies selection bias were used. Although several different discussions can made depending on the measurement method, the emperical result of this research showed that the labor supply of married women is explained by husband's income, assets, the level of education and work experience.

• 품질경영학회지
• /
• 제17권1호
• /
• pp.107-115
• /
• 1989

This study is suggested tn find a methodology of influential subset detecting by using diagonal elements of the hat matrix, $h_{ij}$, and off-diagonal elements of the modified hat matrix, $h_{ij^*}$. And this study shows that elements of two matrix is very useful to detect a masking subset in various situations by analytic and emperical explanations. Also a desirable procedure to detect the significant subset and the calibration points for $h_{ij}$ and $h_{ij^*}$ are recommended.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.455-459
• /
• 1994

One relay control implementation to the servo control systepm is contrlved mainly for the high power electric or electro hydraulic type drive system. Proposed SERME control is relay emulated software scheme accounting a reay producing maximum torque in both direction in the insufficient bandwidth control system. Possibillty is proposed mathematically prlor to emperical work out.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.19-26
• /
• 1998

본 논문은 선박의 조종성능을 추정하기 위하여 선체에 작용되는 유체력과 선체-프로펠라-타 상호 간섭 계수들에 대해 실험 및 반경험적 방법을 사용한 유사선 개념[1,2]을 도입하였다. 유사선 개념은 새로운 선박과 가장 유사한 선박의 기 실험된 데이타를 기본으로 채택한다. 유사선 개념을 적용하기 위해 기 실험된 선박에 대한 실험데이타가 존재해야 되며, 선체력의 변화를 평가하기 위한 반경험적방법이 채택되어야 하고, 기 실험된 선박의 데이타를 수정할 방법이 반드시 존재해야 된다. 유사선 개념을 근간으로, 만재흘수 상태의 실험결과를 이용하여 경하 및 하기만재흘수 상태에서의 선박조종성능을 추정하였고, 또한 유사선으로 기 실험된 선박을 선택하여 새로운 선박의 조종성능을 추정하였다. 본 논문의 계산 방법이 초기 설계단계에서 선박의 조종성능을 정확하게 추정할 수 있음을 확인하였다.

• 대한가정학회지
• /
• 제32권3호
• /
• pp.85-104
• /
• 1994

The primary objective of this survey is to find out how New-Generation Consumers' preferences to wedding housing leisure facilities and nursing facilities are different by their socio-demographic and economic characteristics. 1,227 New-Generation Consumers in Seoul and its metro-politan area whose ages are greater than 20 years and less than 35 years and whose marital periods are less than 4 years are selected for emperical study. The findings show that the trends of New-Generation consumers' preferences are variety high-quality community-concept and openess et al. and nursing should be segmented by consumers' characteristics. In addition the findings suggest that consumer education for New-Generation Consumers and their parents should be performed according to desirable and socilly conscious consumption.

• 열처리공학회지
• /
• 제6권2호
• /
• pp.79-88
• /
• 1993

The static creep mechanism and behaviour of Al-Zn-Mg alloy have been investigated under condition of constant stress tension creep test in the temperature and stress range of $170-260^{\circ}C$ and 5-12.5 $kg/mm^2$ respectively. The experimental result are follows : The stress exponent value for creep was observed to about 7.3-6.43 and the activation energy for creep deformation was 44-41 kcal/mol. Larson-Miller parameter P for the crept specimens under the creep condition was obtained as P = (T + 460) (log $t_r$ + 8.6). Emperical equation for the creep rate was obtained by the computer simulation as follows. $${\varepsilon}\;=\;\exp[(-5.519{\times}10^{-4}{\sigma}+2.33{\times}10^{-2})T-6.98{\sigma}+18.295]{\times}{\sigma}^{-0.0142+10.18}\exp[\frac{(-6{\sigma}+47.8)1000}{RT}]$$ Fracture was dominated by intergranular mechanism over the experimental range.

• 한국가금학회지
• /
• 제8권1호
• /
• pp.31-36
• /
• 1981

This study was conducted to investigate how much total feed cost can be curtailed by the application of linear programming compared with the conventional hand calculating method in determining the feed formula in feed mill. Data were collected from a feed mill producing 19 different kinds of feed and having capacity of producing 5,000 tons of feed a month. According to the results of analysis, the least-cost feed formulation by linear programming showed a decrease of 4,793,172 won monthly in total feed cost as compared with the conventional hand calculating method. But, to confirm the results of this study, it is necessary to conduct further emperical studies.

• 천문학회지
• /
• 제26권2호
• /
• pp.103-114
• /
• 1993

We have analyzed a set of high resolution photographic line profiles of a Zeeman sensitive Fe I $\lambda$ 6302.5 line taken with the Universal Birefringent Filter over a single round sunspot (SPO 5007) at the Sacramento Peak Solar Observatory. The observed spectra recorded on films are traced by PDS and the traced densities are converted to relative intensity by means of IRAF. The Stokes I and V profiles are then constructed by adding together and subtracting from each other the left and right handed circular polarizations, respectively. The reduced I and V profiles are analyzed by means of the coarse analysis(Auer et al.(1977), Skumanich and Lites(1987)) with the use of inversion technique. It is found that the umbral field strength is about 3000 gauss and the field distribution follows closely the emperical model proposed by Wittmann(1974).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.752-759
• /
• 2006

Conglomerates and core-stones are the typical composite geomaterials that are composed of a weak matrix and a strong pebble part. In general, we couldn't analyze the composite geomaterials by using emperical rock classification methods. In the study, a series of analyses of elastic behavior of composite geomaterials are carried out by using homogenization theory. 45-case models are made with considering 3 kind of factors such as gravel content, size and strength of matrix. Those are applicable to various composite geomaterials of conglomerates and core-stones. The size of analysis model is large enough to exceed REV.

• 한국전산유체공학회지
• /
• 제11권2호
• /
• pp.32-39
• /
• 2006

A heat dissipation modeling method of EEE parts is developed for thermal design and analysis of an satellite electronic equipment. The power consumption measurement value of each functional breadboard is used for the heat dissipation modeling method. For the purpose of conduction heat transfer modeling of EEE parts, surface heat model using very thin ignorable thermal plates is considered instead of conventional lumped capacity nodes. These modeling methods are applied to the thermal design and analysis of CTU EM and EQM and verified by thermal cycling and vacuum tests.