• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.818-825
• /
• 2020

The embedded system can be defined as a special purpose system with a built-in computer, and has a wide variety of applications such as home appliances, office equipment, and weapon systems. A well-defined taxonomy in a specific field is advantageous for learning and education, however, the classification scheme for embedded systems is difficult to find. In this paper, we propose a taxonomy for embedded systems. First, the generalized structure of the embedded system was presented. And, it is divided into two parts: "firmware based" and "embedded OS based". In addition, according to the characteristics of embedded system applications, it is divided into two categories: "non-dependable" application and "dependable" application, which makes 4 planes. We describe the features of each quadrant and show that the classification is well suited by showing examples. Our taxonomy can be used to set teaching and learning methods of embedded systems.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.142-148
• /
• 2015

The main purpose of this squib is to provide a new principled account for variation of canonical sentence structure in Korean and Japanese based on the linguistic data commonly observed in some dialects of Korean and Japanese. Unlike the English case in which Comp(lementizer) such as 'that' in an embedded clause freely drops as far as the ECP (Lasnik & Saito 1992) is obeyed, some dialects of both Korean and Japanese show interesting linguistic data very different from those of English, thereby leading us to reasonably doubt the traditionally-accepted paradigm of the canonical sentence structure of CP for all languages. In this squib I propose, based on Korean & Japanese dialects and by developing the Minimal Structure Principle (MSP) ($Bo{\check{s}}kovi{\acute{c}}$ 1997, p. 25), that the cannonical structure of a sentence is not fixed, from the beginning at all, to be one single maximal category, CP. Instead, it should be decided to be either CP or IP, based on the feature of [${\pm}$markedness] and MSP, and the marked (or non-cannonical) embedded sentence needs to satisfy ECP for adjacency (or feature-licensing by the matrix verb in the MP terminology).

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.75-80
• /
• 2013

According to advance of electronic packaging technology, electronic package becomes smaller. Miniaturization of package causes the temperature rise of package. This can degrade life of electronic device and generate the failure of electronic system. In this study, we proposed a new semi-embedded structure with micro pattern for maximizing heat dissipation. A proposed structure showed the characteristics which have maximum temperature lower than $20^{\circ}C$ compared with conventional structure. And also, in view of thermal stress and strain, our structure showed a remarkably low value compared with other ones. We expect that the new structure proposed in this work can be applied to an flip-chip package of the future.

• Proceedings of the IEEK Conference
• /
• 2000.11c
• /
• pp.181-184
• /
• 2000

This paper presents an experimental system, where an object extracted from an image sequence is embedded into the desired position in a scene. First, a moving object is detected and the 3-D structure is obtained by SFM analysis of comer trajectories. We constrained the motion to translational motion only. Extracted objects are classified by matching with 3-D models and then the structure of the occluded part is restored. Camera calibration is performed for the background scene which will embed the object. Finally, the object is embedded into the scene. In the experiments, we used synthetic image sequences generated with OpenGL library for easy evaluation of the 3-D structure estimation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.260-261
• /
• 2019

Corrosion of rebar embedded reinforced concrete is the main cause of collapse and degradation of reinforced concrete structure that many researches are recently focused on these works. Methods of evaluating rebar corrosion are divided into physical and electrochemical methods. However, the result of Conventional methods are less reliable due to effect of internal and external environments. In this study, rebar corrosion detection sensor for embedded rebar of RC structures is evaluated through immersion test in NaCl solustion for 160hours. From the results, Rebar corrosion was ongoing and corrosion products are produced on rebar surface. The voltage is decreased as amount of corrosion production increased.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.9-14
• /
• 2011

In this study, the internal structure of an optical waveguide embedded in a flexible optical circuit board is observed with a confocal microscope. In order to increase the light reflection from an internal material interface with a very small index difference, and thus enhance the signal contrast, a theta microscopy scheme has been integrated into a conventional confocal microscope, and a high NA oil-immersion lens has been used. The interface reflectivity is increased from roughly 0.0015% to 0.025% by the proposed method, and the internal structure can thus be successfully measured.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.6
• /
• pp.383-391
• /
• 2011

As we know the effects of cache memory research, instruction and data caches can be separated for higher performance with Harvard CPUs. In this paper, we shows the efficiency of buffer system in the instruction and data flash storage medium. And we analyzed characteristics of the data and instruction flash and evaluated the performance. Finally, we propose the best buffer structure with an optimal block size and buffer size for the instruction and data flash.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.61-67
• /
• 2010

A characterization procedure for analyzing symmetric coupled MIS(Metal-Insulator-Semiconductor) transmission line is used the same procedure as a general single layer symmetric coupled line with perfect dielectric substrate from the extraction of the characteristic impedance and propagation constant for even- and odd-mode. In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite-Difference Time-Domain (FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Symmetric coupled MIS transmission line parameters for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency-dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.537-542
• /
• 2002

The social trouble to the durability of concrete rises recently because the embedded rebar corrosion influences concrete structures to deteriorate structural capacity. And also, the rebar corrosion causes crack of concrete, decrease of steel section and separation of covering concrete. In the result, the bond strength of concrete and embedded rebar decreases, which causes deterioration of the structure behavior in reinforced concrete. In this study, the relation of bond strength and bond-slip was understood to evaluate capacity deterioration of reinforced concrete, and experiments were carried out by compressive strength and embedded rebar condition in the rebar corrosion rate.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.35-38
• /
• 2004

In this paper, we aim to implement the embedded VoIP Phone based on EISC core Microcontroller. EISC is recently new microprocessor architecture, which contains both advantage of RISC and CISC. This advantages are desirably resulted in high code density, high performance and 16/32/64bit scalable instruction length. Also, we select the embedded system which can be guaranteed performance and economical efficiency for implementation that system. As the step of this research, we first study basic system for implementation of target system. Next, we construct the structure of embedded VoIP Phone based on 32bit EISC MCU efficiently. And then we realize that constructed system and verify the performance of that realized system by the test of voice communication in field.