• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.276-279
• /
• 2010

This paper is about a development of effective practice subject in electronic circuit textbook of industrial high school. This paper introduces generally about the practice subject in electronic circuit textbook of industrial high school of the 7th National curriculum and presents problem of current practice and makes an alternative idea that improve current practice. The contents of current electronic circuit textbook of industrial high school have variety topics and these topics are independence and separated. So students have some problems to apply of learned knowledge. Therefore, researcher improved the various electronic circuit practice in current electronic circuit text book and added new practice and manufactured a electronic circuit module based on these circuits. And researcher suggested new practice subject what useful electronic equipment that assembled module of result of electronic circuit practice of each section. When the last subjects are accomplished the students may have feel of achievement and high study effect from these practice. The practice subjects of this paper were manufactured after verification and tested it's performance by computer simulation program I hope that these new practice subjects make effective understanding and application of electronic circuit for student.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.293-299
• /
• 2010

This paper is about a development of effective practice subject in electronic circuit textbook of industrial high school. This paper introduces generally about the practice subject in electronic circuit textbook of industrial high school of the 7th National curriculum and presents problem of current practice and makes an alternative idea that improve current practice. The contents of current electronic circuit textbook of industrial high school have variety topics and these topics are independence and separated. So students have some problems to apply of learned knowledge. Therefore, researcher improved the various electronic circuit practice in current electronic circuit text book and added new practice and manufactured a electronic circuit module based on these circuits. And researcher suggested new practice subject what useful electronic equipment that assembled module of result of electronic circuit practice of each section. When the last subjects are accomplished the students may have feel of achievement and high study effect from these practice. The practice subjects of this paper were manufactured after verification and tested it's performance by computer simulation program.

• Journal of Practical Engineering Education
• /
• v.7 no.2
• /
• pp.113-117
• /
• 2015

In this academic paper, we introduce a bread board simulation which is developed based on HTML language. this program is developed because actual electronic practices have some problems. Electronic circuit practice using bread board is widely practiced in colleges or high schools in South Korea, but actual electronic circuit practice needs lots of consumable stuff, and they are needed to be purchased and managed continuously. Besides, composing complicated electronic circuit restricts the efficiency of studying. Therefore, we propose breadboard simulation program which helps to resolve those problems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.82-88
• /
• 2001

Manufactured easy elevator can drives from the first floor to fifth floor as sequence control circuit in cause opening than existing equipment of experiment and practice, the structure of in the first implementation process are hand-worked control component with push-button, L/S and relay, it is structured a lamp to express that the door open and moving of cage by mechanical action of For/Rev motor-braker of which load. The second structure of implement process to control from the first floor to the fifth floor with the PLC elevator program can control by the sensor of hand-operated function of L/Sl~L/S5 in time that the S/Wl~S/W5 of PLC control panel operates to the For/Rev. The function of two kind process that an elevator is driven by PLC program and the sequence control relay circuit is a mechanical relay sequence control field and it is equipment apparatus of it to get appropriately the technology of For/Rev in that mechanical operating cause of a load using the PLC program. Also the wring circuit using a plug, dissembly. the circuit and the principle of component, and PLC program with the function test can be used the implementation field to the total technology theory about FA.

• Journal of Practical Engineering Education
• /
• v.9 no.2
• /
• pp.133-137
• /
• 2017

In this paper, we present the results of the study on the development of electric circuit e-learning content as one of the required courses in electrical and electronics engineering. Theoretical learning of electric circuit e-learning contents is based on multimedia type and the practice part is based on moving picture. The e-learning contents were used for a blended learning in actual offline class. We investigated the learning effect of each component of e-learning contents and investigated and analyzed the type of e-learning contents suitable for class of electric circuit. In addition, we investigated and analyzed effective ways to utilize e-Learning content for offline teaching. In this paper, we show how to construct effective contents, length types and utilization methods in engineering education through the case study on the e-learning content.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.12
• /
• pp.333-338
• /
• 2020

This paper proposes an augmented reality-based electronic circuit education system as a way for electronic circuit education, which is the basis of ICT convergence technology field. It consists of a hardware module that can identify the actual circuit and a mobile educational content that can check the current flow, input, output, and measured value by applying augmented reality technology. An experiment was conducted on image recognition, which is the main performance, for the purpose of stable operation of the system, and as the experimental method the recognition rate was measured by changing the distance between the hardware module and the mobile device to a certain interval. As a result of the experiment, the recognition rate was 100 percent at a distance of 25[Cm] or higher, and it was confirmed that the recognition rate decreased by 12% at a distance below 25[Cm], which can be said to be the effect of an error that results in image loss taken due to close distance. In the future, we plan to apply the education system presented in this paper to classes, which increases the efficiency of classes and improve students' interest and understanding of the subject.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2014

Self-exciting electronic ballast, of small size, and low cost, and high power, with no stroboscopic effect, no noise, is widely used in the general lighting market. This paper describes the cause of high switching loss of self-exciting electronic ballast, based on its operational principle; then, to reduce the switch temperature and increase the reliability of the product, the drive circuit has been improved, to achieve soft-switching. The theory analysis, simulation and experimental result prove the feasibility and compatibility of this new method in practice. Finally, the design procedure and winding method of the self-exciting current transformer are introduced.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.4
• /
• pp.47-56
• /
• 2000

Because of the junior college students' learning ability stands on a relatively low level, this research is accomplished to inspire students with further desires, considering students' learning ability and desire. The curriculum of junior college is organized with three parts(electronic communication tool, micro processer, integrated circuit design): the electronic communication tool and micro processer is carried out, and the training for the design skill on semiconductor devices will be focused. The main focus is reflected on the worldwide trend on the design engineering of semiconductor devices and considered for the market establishment on design engineers trained by the lab-oriented practice as well as fundamental of semiconductor technology.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.5
• /
• pp.52-56
• /
• 1996

Fluorescent lamps are widely accepted to energy efficient commercial lighting applications. In designing a fluorescent lamp system, a ballast design heavily relies on the characteristic of a fluorescent lamp under consideration. Especially, at startup time, the transient characteristic of a fluorescent lamp puts much tighter specification of a design. In this paper, based on the transient characteristic at the startup time, a transient behavioral model of a fluorescent lamp is presented with an equivalent circuit. The model is applicable to the wide range of fluorescent lamps provided by different manufacturers. The experimental results are compared with the results provided by PSPICE simulation. The result shows the model is effective In practice. As a result, we could identify more accurate startup constraints to decide the design of either an electro mechanical or an electronic ballast.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2018

Through the design and production of works for the third semester as a major unit, It is proposed the process of satisfying the graduation standards with the design and production process of the drone which can be applied to various mobile environments. Using the shape of Ring Propeller, it is made to be able to play both the role of generating lift as a propeller and the role of a wheel that touches the ground through the surface of the rim. In addition, the Servo Motor is used to convert the drive shaft of the motor to the correct angle according to the command. Then, based on the idea, the 3D printing is implemented to confirm the result of the configuration, and the circuit for driving the propulsion is designed and manufactured. As a result, the conversion of the desired propulsion system during air navigation and operation failed due to the weight increase of the propellant. It is confirmed that the size of the thrust and the tolerance limit of the ring propeller are the errors. Through these processes, it has been recognized to have experience of creative thinking and cooperation through engineering approach and comprehensive design, and confirmed to satisfy the graduation criteria by writing an engineering paper on the result.