• 대한전자공학회논문지SD
• /
• 제49권8호
• /
• pp.47-54
• /
• 2012

본 논문에서는 테라헤르츠 시스템에 적용 가능한 쇼트키 다이오드를 이종 레지스트 패터닝 기술을 이용하여 제작 하였다. 제작된 쇼트키 다이오드는 전자선묘화공정(electron beam lithography)과 포토리소그래피(photolithography)를 사용하여 양극 및 양극 패드의 연결을 동시에 패터닝 하여 공정을 단순화 시켰다. 측정결과 제작된 쇼트키 다이오드의 직렬 저항은 $11.2{\Omega}$, 접합용량은 25.96 fF, 이상 계수(ideality factor)는 1.25를 얻었으며, 차단 주파수는 547.6 GHz를 얻었다.

• 대한전자공학회논문지SD
• /
• 제43권1호
• /
• pp.7-12
• /
• 2006

본 연구에서는 수소화 와 전자빔 사진식각 공정을 이용하여 비가역적이며 안정화된 마이크로 크기의 강자성 구조체를 개발하였다. $Fe_XZr_{100-x}(x=65-85\%)$의 평균성분과 약 1 nm 정도의 성분변조주기를 가지며 총두께가 100 nm 정도인 성분변조(CM) 된 Fe-Zr 박막이 적층되었다. CM Fe-Zr 박막의 자성성질은 SQWID magnetometer, VSM, 그리고 B-H loop tracer로 측정하였다. 수소화 과정 후에 CM 박막은 유사한 균질의 합금 막 보다 모든 성분에서 더 큰 자기 모멘트를 나타내었고 $Fe_{80}Zr_{20}$ 성분에서 가장 큰 증가를 보였다. 수소화 된 $Fe_{80}Zr_{20}$ CM 막은 상온에서 aging을 거친 후에 아주 큰 자기모멘트 증가를 보여 안정되고 비가역적이며 연자성 상태로 변화됨을 알 수 있었다. 전자빔 사진식각기술을 사용하여 원형의 윈도우를 $Fe_{80}Zr_{20}$ CM막 위에 형성한 후에 이 윈도우를 통하여 선택적인 수소화를 실행하였다. 사진식각기술을 통한 수소화는 $49\%$의 자기 모멘트를 증가 시켰다. 이 방법은 나노 크기의 구조에도 적용할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.575-577
• /
• 1999

In this study, the PPPI(Plasma Polymerized Phenyl Isothiocyanate) resist thin film was manufactured in accordance with the plasma polymerization method and after exposing it to an electron beam, a pattern was formed by plasma etching. With the FT-IR(Fourier transform-infrared spectrometry) analysis, it was confirmed that the PI(Phenl Isothiocyanate) monomer was successsfully produced into a thin film by the plasma. The polymerization rate of the thin film was 450~ 1012($\AA$/min) to 100-200(W) discharge power and 120-12($\AA$/min) to 0.1 ~0.4[torr] system pressure.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1253-1256
• /
• 2005

We have developed an electron lithography method, Electron Emission Lithography (EEL), which is capable of printing integrated circuits with an exposure time of only a few seconds. The basic design of the mask, manufactured by standard MIM technology, will be discussed. Patterns printed into e-beam resist by a 1:1 projection system show the applicability of the mask for lithography purposes. The minimum feature size projected so far is 10 um in a system capable of 100 m resolution. Further improvements in resolution to 50 nm are possible.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.291-291
• /
• 2010

Electron-beam lithography (EBL) process is a versatile tool for a fabrication of nanostructures, nano-gap electrodes or molecular arrays and its application to nano-device. However, it is not appropriate for the fabrication of sub-5 nm features and high-aspect-ratio nanostructures due to the limitation of EBL resolution. In this study, the precision assembly and alignment of DNA molecule was demonstrated using sub-5 nm nanostructures formed by a combination of conventional electron-beam lithography (EBL) and plasma ashing processes. The ma-N2401 (EBL-negative tone resist) nanostructures were patterned by EBL process at a dose of $200\;{\mu}C/cm2$ with 25 kV and then were ashed by a chemical dry etcher at microwave (${\mu}W$) power of 50 W. We confirmed that this method was useful for sub-5 nm patterning of high-aspect-ratio nanostructures. In addition, we also utilized the surface-patterning technique to create the molecular pattern comprised 3-(aminopropyl) triethoxysilane (APS) as adhesion layer and octadecyltrichlorosilane (OTS) as passivation layer. DNA-templated gold nanoparticle chain was attached only on the sub-5 nm APS region defined by the amine groups, but not on surface of the OTS region. We were able to obtain DNA molecules aligned selectively on a SiO2/Si substrate using atomic force microscopy (AFM).

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.133-134
• /
• 2009

Cold temperature development (CTD) of electron beam (EB) patterned resists and subsequent dry etching were investigated for fabrication of nano-patterned Niobium (Nb). Bulky Nb fims on GaAs substrates were deposited with EB evaporation. Line patterns on Nb cathode were fabricated by EB patterning and reactive ion etching (RIE). Size deviations of nano-sized line patterns from CAD designed patterns are dependent on the EB total exposure, but it can be improved by CTD of EB-exposed resist. Line patterns of 10 to 300 nm widths of EB-exposed resist patterns were drawn under various exposure conditions of $0.2{\mu}s$/dot (total 240,000 dot) with a constant current (50 pA). Compared with room temperature development (RTD), the CTD improves pattern resolution due to the suppression of backscattering effect. RIE with $CF_4$ was performed for formation of several nano-sized line patterns on Nb. Each EB-resist patterned samples with RTDs and CTDs were etched with two different $CF_4$ gas pressures of 5 Pa. Nb etching rate increases while GaAs (or ZEP) etching rate decreases as the chamber pressure increases. This different dependent of the etching rate on the $CF_4$ pressure between Nb and GaAs (or ZEP) has a significant meaning because selective etching of nano-sized Nb line patterns is possible without etching of the underlying active layer.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.637-641
• /
• 2006

본 논문에서는 100 nm 게이트 길이를 갖는 InGaAs/InAlAs/GaAs MHEMT(metamorphic high electron mobility transistors)m의 DC와 RF 특성을 분석 하였다. 이중 노광 방법으로 ZEP520/P(MMA-MAA)/PMMA 3층 구조의 레지스터와 게이트 길이 100 nm인 게이트를 제작하였다. 게이트의 단위 폭이 $70\;{\mu}m$인 2개의 게이트와 길이가 100 nm로 제작된 MHEMT를 DC 및 RF특성을 조사하였다. 최대 드레인 전류 밀도는 465 mA/mm, 상호전달 컨덕턴스는 844 mS/mm이, RF 측정으로부터 전류 이득 차단 주파수는 192 GHz와 최대 진동주파수 310 GHz인 특성을 보였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.71-71
• /
• 2003

Hot embossing has been widely accepted as an alternative to photolithography in generating patterns on polymeric substrates. The optimization of embossing process should be accomplished based on polymer substrate materials. In this paper, the effect of polymer substrates on nano scale hot embossing process was studied. Silicon molds with nano size patterns were fabricated by e-beam direct writing. Molds were coated with self-assembled monolayer (SAM) of (1, 1, 2.2H -perfluorooctyl)-trichlorosilane to reduce the stiction between mold and substrates. For an embossing, pressure of 55, 75 bur, embossing time of 5 min and temperature of above transition temperature were peformed. Polymethylmethacrylates (PMMA) with different molecular weights of 450,000 and 950,000, MR-I 8010 polymer (Micro Resist Technology) and polyaliphatic imide copolymer were applied for hot embossing process development in nano size. These polymers were spun coated on the Si wafer with the thickness between 150 and 200 nm. The nano size patterns obtained after hot embossing were observed and compared based on the polymer properties by scanning electron microscopy (SEM). The imprinting uniformity dependent on the Pattern density and size was investigated. Four polymers have been evaluated for the nanoimprint By optimizing the process parameters, the four polymers lead to uniform imprint and good pattern profiles. A reduction in the friction for smooth surfaces during demoulding is possible by polymer selection.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.652-655
• /
• 2001

In this paper, I have studied minimization of the kerf-width and surface burning which are occurred after the singulation process of multi layer $\mu$-BGA( thickness 1.1 mm, 0.9 mm) with a pulsed Nd:YAG( = 532 nm, repetition rate = 10 Hz) laser. The thermal energy of a pulsed Nd:YAG laser is used to cut the copper layer. I have studied are minimization of the surface burning and kerf-width using a photo resist, $N_2$blowing and polyester double sided tape as a cutting parameter. The $N_2$blowing reduces a laser energy loss by debris and suppresses a surface carbonization. Also, I have studied characters of cutting with a choice of side of laser beam incidence. The SEM(Scanning Electron Microscope), non-contact 3D inspector and high-resolution microscope are used to measure kerf width and surface state. The optimum value of 1.1 mm $\mu$-BGA singulation is 524 $\mu$m that is reduced kerf width of 60 % with $N_2$blowing. And I obtained reduction of carbonization of 68 % with a polyester double side tape in 0.9 mm $\mu$-BGA. I used laser intensity of 1.91$\times$10$^{6}$ / $\textrm{cm}^2$ in this study.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.60-67
• /
• 2014

The ability of electronic packages and assemblies to resist solder joint failure is becoming a growing concern. This paper reports on a study of high speed shear energy of Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder with different electroless Ni-P thickness, with $HNO_3$ vapor's status, and with various pre-conditions. A high speed shear testing of solder joints was conducted to find a relationship between the thickness of Ni-P deposit and the brittle fracture in electroless Ni-P deposit/SAC405 solder interconnection. A focused ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the fractured pad surface with and without $HNO_3$ vapor treatment. A scanning electron microscopy (SEM) and an energy dispersive x-ray analysis (EDS) confirmed that there were three intermetallic compound (IMC) layers at the SAC405 solder joint interface: $(Ni,Cu)_3Sn_4$ layer, $(Ni,Cu)_2SnP$ layer, and $(Ni,Sn)_3P$ layer. The high speed shear energy of SAC405 solder joint with $3{\mu}m$ Ni-P deposit was found to be lower in pre-condition level#2, compared to that of $6{\mu}m$ Ni-P deposit. Results of focused ion beam and energy dispersive x-ray analysis of the fractured pad surfaces support the suggestion that the brittle fracture of $3{\mu}m$ Ni-P deposit is the result of Ni corrosion in the pre-condition level#2 and the $HNO_3$ vapor treatment.