• 한국식품저장유통학회지
• /
• 제10권2호
• /
• pp.206-212
• /
• 2003

인삼분말에 대한 전자선(electron beam)의 이용가능성을 연구하고자, 방사선 살균처리(2.5∼15 kGy)가 백삼 및 홍삼분말의 사포닌 함량 및 패턴, 페놀함량, 산성다당체 함량, amylase activity, 단백질 패턴 등에 미치는 영향을 감마선 조사와 비교하였다. 사포닌 함량과 패턴을 TLC 및 HPLC로 분석해 본 결과, 조사선량과 에너지원에 따른 변화는 확인되지 않았으며, 실온 저장 4개월 이후에도 안정된 경향을 보였다. 총페놀성분 및 산성다당체 함량은 홍삼이 백삼 보다 높은 함량을 보였으며, 산성다당체 함량은 조사선량의 증가로 높은 추출량을 보였다. 백삼분말의 amylase activity는 방사선조사 직후 증가하였으나, 4개월 이후에는 대조구 보다 낮은 간을 보였으며, 추출단백질의 전기영동 패턴은 15 kGy의 전자선 및 감마선구에서도 대조구와 차이가 없었다.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.743-747
• /
• 2007

반도체 소자 제작에 있어서 회로의 pattern 형성에 이용하는 차세대 lithography 공정 기술을 위해서 전자빔 lithography 공정 기술 연구가 진행되고 있다. 본 연구에서는 Gauss 해석법과 Monte Carlo의 수치해석법을 사용하여 두께 100 nm의 PMMA (poly-methyl-methacrylate) resist에 전자 $1{\times}10^4$를 입사시키고, 입사 전자빔 에너지에 따른 PMMA 내에서의 투과 깊이를 비교하였다. 전자빔 에너지의 크기는 100eV, 300eV, 500eV, 700eV, 그리고 1000eV에 대하여 simulation을 실시하였다.

• Mass Spectrometry Letters
• /
• 제5권3호
• /
• pp.89-93
• /
• 2014

Lincomycin is one of the major species among the Pharmaceuticals and Personal Care Products (PPCPs) detected from the four major rivers in Korea. The structure characterization was performed of six degradation products of lincomycin formed under the irradiation of electron beam, and the degradation efficiency as a function of the various irradiation dose and sample concentration was investigated. Electron beam (10 MeV, 0.5 mA and 5 kW) experiments for the structural characterization of degradation products that are fortified with lincomycin, were performed at the dose of 10 kGy. The separation of degradation products and lincomycin was carried out using a C18 column ($2.1{\times}100$ mm, $3.5{\mu}m$), using gradient elution with 20 mM ammonium acetate and acetonitrile. The structures of six degradation products of lincomycin were proposed by interpretation of mass spectra and chromatograms by LC-MS/MS. The mass fragmentation pathways of mass spectra in tandem mass spectrometry were also proposed. Experiments were performed of the degradation efficiency as a function of the irradiation dose intensity and the initial concentration of lincomycin in an aqueous environment. In addition, increased degradation efficiency was observed with a higher dose of electron beam and lower concentration.

• 방사선산업학회지
• /
• 제7권1호
• /
• pp.23-28
• /
• 2013

In this study, we fabricated high density polyethylene (HDPE) composites filled with antioxidants and UV stabilizers. The electron beam irradiation on the fabricated composites was carried out over a range of absorbed doses from 50 to 200 kGy to confirm the changes of discoloration. The changes of discoloration were characterized using a color difference meter and FT-IR for confirming the changes of the color difference and structural change. It was observed that the color difference of IRGANOX 1010-, IRGAFOS 168-, and TINUVIN 328- added HDPE was higher than that of the control HDPE by electron beam irradiation. The melting temperature of UV stabilizer-added HDPE was not significantly changed by electron beam irradiation. However, the melting temperature of phenol-containing antioxidant-added HDPE was increased with increasing the absorbed dose. And the melting temperature of phosphorus-containing antioxidant-added composite was decreased with increasing the absorbed dose.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.17-21
• /
• 2012

The effects of gamma ray or electron beam irradiation on herbaceous medicinal plants were investigated in terms of the composition of volatile constituents using the aerial parts or leaves of Artemisia princeps Pamp. cv. Ganghwayakssuk and Artemisia argyi cvs. Namhaeyakssuk and Hwanghaessuk. The composition of volatile constituents in leaves was clearly distinguishable among the three Artemisia cultivars. However, the relative proportions of the major volatile constituents such as 1,8-cineole, ${\alpha}$-pinene, camphene, santolina triene, and artemesia triene, were similarly changed in two or three cultivars by gamma ray or electron beam irradiation. In particular, the proportion of 1,8-cineole was increased up to 1.29- to 1.71-fold in the three cultivars after irradiation with gamma ray. These results suggest that gamma ray or electron beam irradiation can be applied to modulate the composition of volatile constituents in the leaves of Artemisia plants.

• 인간식물환경학회지
• /
• 제23권2호
• /
• pp.171-178
• /
• 2020

The present study was conducted to determine the effects of electron beam irradiation on the postharvest quality of cut flowers. Cut flowers were irradiated with electron beam at 100, 200, 400, 600, 800, 1,000, and 2,000 Gy with a 10 MeV linear electron beam accelerator to evaluate their irradiation tolerance. Postharvest quality was determined by monitoring fresh weight loss, flower longevity, flower diameter, flowering rate, visual quality of flowers and leaves, and chlorophyll content. Cut flowers showed a radiation-induced damage with increasing the irradiation dose. Flower longevity and fresh weight of cut flowers decreased when the irradiation dose was increased. Flower bud opening was also inhibited in a dose-dependent manner. The effective irradiation doses for 10% reduction of postharvest quality (ED₁₀) values were 144.4, 451.6, and 841.2 Gy in the 'Medusa' lily, 'Montezuma' carnation, and 'Rosina White' eustoma, respectively. Although tolerance of cut flowers to electron beam irradiation vary according to species, cultivars, or maturity stage conditions, it is conceivable that 'Montezuma' carnation and 'Rosina White' eustoma could be tolerated and maintained overall postharvest quality up to 400 Gy, the generic irradiation dose approved by the Animal and Plant Health Inspection Service (APHIS) and the International Plant Protection Convention (IPPC) for postharvest phytosanitary treatments.

• Applied Microscopy
• /
• 제45권4호
• /
• pp.199-202
• /
• 2015

A simple and novel transmission electron microscopy (TEM) sample preparation method for phase change nanowire is investigated. A $Ge_2Sb_2Te_5$ (GST) nanowire TEM sample was meticulously prepared using nanomanipulator and gas injection system in a field emission scanning electron microscopy for efficient and accurate TEM analysis. The process can minimize the damage during the TEM sample preparation of the nanowires, thus enabling the crystallographic analysis of as-grown GST nanowires without unexpected phase transition caused by e-beam heating.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.215-216
• /
• 2011

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.53-56
• /
• 2002

We have developed a Monte Carlo (MC) simulator for electron beam lithography in multi-layer resists and multi-layer substrates in order to fabricate and develop high-speed PHEMT devices for millimeter- wave applications. For the deposited energy calculation to multi-layer resists by electron beam in MC simulation, we modeled newly for multi-layer resists and heterogeneous multi-layer substrates. Using this model, we simulated T-gate or r-gate fabrication process in PHEMT device and showed our results with SEM observations.

• Rapid Communication in Photoscience
• /
• 제2권1호
• /
• pp.31-33
• /
• 2013

The irradiation of electron-beam onto bis-(diphenylphosphino)methane, ethane, propane and butane initiated phenyl-shift from a phosphine to another phosphine atom and subsequent fragmentation resulted in the formation of triphenylphosphine derivative as key intermediate. The mechanism of those processes is speculated.