• 한국전자파학회지:전자파기술
• /
• 제5권1호
• /
• pp.13-21
• /
• 1994

마이크로스트립 미앤더(meander) 선로를 해석하고 실험하여 저역통과 특성을 고찰하였다. 본 해석방법의 요체는 선로간 상호결합에 관한 해석적인 관계식에 밴드(bend)의 등가모델을 추가한 것이며 이의 수치계산은 빠르고 결합선로의 수에 제한을 받지 않느다. 4중 결합 미앤더 선로에 대한 해석 및 실험 결과들을 제시했으며, 이들이 잘 일치하고 있음을 보였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.183-186
• /
• 2001

In this paper, the analytical model to understand the propagation of electromagnetic waves in the foam core sandwich structures was proposed. Using the analytical model, efforts were made to find the optimal stacking sequence of composite skins for maximum transmittance of electromagnetic wave. Numerical analyses of unidirectional composites and foam as a function of incident angle were performed. From the results of analysis, the general tendencies of transmittance of electromagnetic wave through composites and foam were obtained. Based on the general tendencies, optimal stacking sequences of composite skins for the maximum transmittance of electromagnetic wave were found with certain ranges of incident angle using genetic algorithm(GA).

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.68-71
• /
• 2004

The limitation of telegrapher's equations for analysis of nonuniform transmission lines is investigated here. It is shown theoretically that the input impedance of a nonuniform transmission line cannot be derived uniquely from the Riccati equation only except for the exponential transmission line of a particular frequency-dependent taper. As an example, the input impedance of an angled two-plate transmission line is calculated by solving the telegrapher's equations numerically. The numerical results suffer from larger deviation from its rigorous solution as the plate angle increases.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.152-160
• /
• 2011

The electromagnetic characteristics of FCEVs (fuel cell electric vehicles) are much different from the existing combustion engine cars as well as hybrid, plug-in-hybrid, and pure electric vehicles due to the high voltage/current generated by a fuel cell stack which uses a compressed hydrogen gas reacted with oxygen. To operate fuel cell stack efficiently, BOP (Balance of Plant) which is consisted of many motors in water pump, air blower, and hydrogen recycling pump as well as inverters for these motors is essential. Furthermore, there are also electric systems for entertainment, information, and vehicle control such as navigation, broadcasting, vehicle dynamic control systems, and so on. Since these systems are connected by high voltage or general cables, EMC (Electromagnetic compatibility) analysis for high voltage and general cable of FCEV is the most important element to prevent the possible electric functional safety errors. In this paper, electromagnetic fields by high voltage and general cables for FCEVs is studied. From numerical analysis results, total time harmonic electromagnetic field strength from high voltage and general cables have difference of 13~16 dB due to ground effect by impedance matching. The EMI results of FECV at 10 m distance shows difference of 41 dB at 30 MHz and 54 dB at 230 MHz compared with only general cable routing.

• 한국전자파학회지:전자파기술
• /
• 제4권1호
• /
• pp.3-9
• /
• 1993

각진 두 스트립으로 된 전송선의 전자파 결합에 대한 새로운 해석 방법을 개발하였다. 이 방법은 먼저 원통형 전송선벙정식을 해석적으로 푼다음, 관련 변수들의 값을 등가구조인 각진 두 평판으로된 전송선을 따라 원통형 TEM 모드가 유지되도록 조정한다. 이러한 방법으로 구한 해석적인 형태의 해는 회로개념의 방법으로 구한 수치계산값과 거의 일치함을 보였다.

• 한국전자파학회논문지
• /
• 제14권11호
• /
• pp.1225-1231
• /
• 2003

본 논문에서는 유전체로 코팅된 3차원 임의 형상 도체의 전자파 산란 문제를 해석할 수 있는 결합적분방정식 (combined field integral equation, CFIE)의 해법을 제안한다. 본 논문의 목적은 구조물의 내부 공진주파수에서도 CFIE로부터 안정된 해를 얻을 수 있음을 보이는 것이다. 유전체로 코팅된 도체 구조에 대하여 제안된 방법으로 계산된 레이더 단면적(radar cross section, RCS)을 보이고 다른 방법에 의한 해들과 비교한다.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.621-629
• /
• 1998

본 논문에서는 유한요소법을 사용하여 불균일 손실터널내의 전자파 전파특성을 해석하고 있다. 해석 방법으로서는 무손실 도파관내에 유전체를 삽입시킨 도파관 필터의 해석방법을 확장하여 손실터널내의 전자파 전파문제를 해석하고 있다. 수치해석의 결과, 손실터널내에서 일어나는 전자파의 감쇠는 손실벽면의 매질정수와 폭에 따라 크게 영향올 받는다는 것올 알 수 있었다. 또한, 모드간의 직교생으로부터 기본모드와 고차모드를 분리하여 고차모드의 발생정도와 모드에 따른 전따특성도 검토하고 있다. 해석결과의 타당성올 확인하기 위해 제작된 손실터널의 전파특성의 실험결과를 이론치와도 비교 검토하고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.403-406
• /
• 2009

Recently, electricity is essential for human lives. Modem people take cultural benefits due to the development of the electric power system and the spread of the high tech-electric appliances, the cell phones, and etc. However, the electromagnetic field problems become prominent figures owing to the fault of the communication devices around the power line and the biological effect, and etc. In this paper, we introduce the simple electromagnetic field calculation based on the transmission line matrix method, prior to the analysis about the influence of electromagnetic field. Simulation object is the inner part of the trailer car in the high speed train. Unlike the existing paper we submitted, we analyze not only the magnetic field but the electric field in the inner part of the trailer car which makes up the high speed train.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.8-15
• /
• 1998

An analysis of the microstripline is started as an assumption of the axial & transveral current distribution. Applying the boundary conditions to the scalar wave equations of a electric & magnetic potential, the two simultaneous coupled integral equations are produced. The electronmagnetic fields in microstrip line can be obtained by solving these two coupled integral equaltion. In general, either a numerical analysis method or a Galerkin method was used to solve them. In this paper, a residue theorem is proposed to solve them. The electromagnetic fields are expressed as integral equations for LSE and LSM mode in the spectral domain. Applying a residue theorem to the Fourier transformed equation and Fourier inverse transformed equation which is necessary for interchanging the space domain and the spectral domain, the electromagnetic fields are expressed as algebraic equations whichare relatively easier to handle. the distributions of the electromagnetic field are shown at the range of -5w/2.leq.x.leq.5w/2, 0.lep.y.leq.4h for z=0. It agrees well with the results of the Quasi-TEM mode analysis.

• 정보학연구
• /
• 제8권2호
• /
• pp.77-84
• /
• 2005

In this paper, electromagnetic scattering problems by a resistive strip grating with tapered resistivity on a grounded dielectric plane according to strip width and spacing, relative permittivity and thickness of dielectric layers, and incident angles of a electric wave are analyzed by applying the Fourier-Galerkin Moment Method known as a numerical procedure. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. The resistivity of resistive strips in this paper varies from zeroes at one edge to infinite at the other edge, then the induced surface current density on the resistive strip is expanded in a series of Jacobi polynomials of the order ${\alpha}=0.2,\;{\beta}=-0.2$ as a orthogonal polynomials. The numerical results of the geometrically normalized reflected power in this paper are compared with those for the existing perfectly conducting strip. The numerical results of the normalized reflected power for conductive strips case with zero resistivity in this paper show in good agreement with those of existing papers.