• 제목/요약/키워드: Electromagnetic Band Gap

검색결과 82건 처리시간 0.024초

이중 바이어스 조절과 PBG를 이용한 도허티 증폭기 전력 효율 개선에 관한 연구 (Research on PAE of Doherty Amplifier Using Dual Bias Control and PBG Structure)

  • 김형준;서철헌
    • 한국전자파학회논문지
    • /
    • 제17권8호
    • /
    • pp.707-712
    • /
    • 2006
  • 본 논문에서는 이중 바이어스 조절과 PBG 구조를 이용하여 Doherty 증폭기의 효율을 개 선하였다. PBG 구조를 출력 정합 회로에 구현하였으며, 이중 바이어스 조절을 carrier amplifier에 적용하여 낮은 입력 레벨에서도 Doherty 증폭기의 효율을 개선할 수 있었다. 제안된 구조를 이용한 Doherty 증폭기는 기존의 전력 증폭기에 비해 PAE는 8%, $IMD_3$는 -5 dBc 개선하고, 모든 입력 전력 레벨에서 30% 이상의 고효율을 가질 수 있었다.

B20 결정구조와 MnGe와 MnSi의 전자구조 및 자기적 특성 (B20 Crystal Structure and Electromagnetic Property of MnGe and MnSi)

  • 정태성
    • 한국재료학회지
    • /
    • 제29권8호
    • /
    • pp.477-482
    • /
    • 2019
  • The magnetic properties and electronic structures of the B20 crystal structure MnGe and MnSi were investigated using the density functional theory with local density approximation. The low symmetry of the B20 crystal structure plays a very important role to make electromagnetic characteristics of these materials. The important result of the calculations is that it can be observed the appearance of a pair of gaps in the density of states near the Fermi level in both compounds. These features are results from d-band splitting by the low symmetry of the crystal field from B20 crystal structure. It can be seen that there is half-metallic characteristics from the density of states in both compounds. The calculation shows that the value of magnetic moment of MnGe is 5 times bigger than that of MnSi even though they have same crystal structure. The electronic structures of paramagnetic case have a very narrow indirect gap just above the Fermi level in both compounds. These gaps acquire some significance in establishing the stability of the ferromagnetic states within the local density approximation. Calculation shows that the Mn 3d character dominates the density of states near the Fermi level in both materials.

신호 전달 평면의 브릿지 라인을 이용한 EBG 구조 (EBG Structure Using Bridge Line in the Signal Transmission Plane)

  • 김병기;하정래;이준상;배현주;권종화;나완수
    • 한국전자파학회논문지
    • /
    • 제21권7호
    • /
    • pp.786-795
    • /
    • 2010
  • 본 논문에서는 EBG(Electromagnetic Band Gap) 구조에 존재하는 두 단위 셀을 신호 전달 평면상의 브릿지 라인으로 연결하는 새로운 형태의 EBG 구조를 제안하였다. 이와 같은 구조를 갖는 EBG는 단위 셀을 연결하는 비아 홀과 브릿지 라인으로 인해 전원면에서 SSN(Simultaneous Switching Noise)를 효과적으로 차단하였으며, 또한 신호 평면상에서 존재하는 신호선들 사이에서는 우수한 신호 전달 특성을 보였다. 제안된 구조의 EBG는 특정 사이즈에서 차단 주파수 1.2 GHz, 저지 대역폭은 8.3 GHz로 넓은 주파수 대역에서 -30 dB 이하의 저지 대역특성을 나타내었다. 또한 광대역의 저지 대역폭을 유지하면서 신호 평면상에 위치한 신호선이 우수한 신호 전달 특성을 가질 수 있는 전원면/접지면의 위치를 최종적으로 제안하였다.

박막 증착공정을 사용하여 구현된 초소형 RFID 태그 안테나 (Small RFID Tag Antenna Based on Thin-film Deposition Process)

  • 정태환;김정연;김병국;박승범;이석진;안상기;우덕현;권순용;임동건;박재환;안중수
    • 한국전기전자재료학회논문지
    • /
    • 제22권4호
    • /
    • pp.285-289
    • /
    • 2009
  • Small RFID tag antenna were fabricated on Si substrate and their physical and electrical properties were evaluated. With decreasing the size of tag antenna on Si substrate, small SMD-type RFID tags could be fabricated, which is very useful for various applications including PCB tracking. Firstly, electromagnetic properties on tag antenna pattern were simulated with HFSS. The setup frequency was 13.56 MHz of HF-band RFID. The line-width and line-gap were modeled in the range of $50{\sim}200{\mu}m$. S parameters, SRF, and Q value were calculated from the model. When the line-width and line-gap were 100 urn and the loop-turn was 10, the SRF was 80 MHz and the Q value was ca. 9. When the microstrip antenna pattern of aluminum was fabricated by using DC sputtering, Vpp of ca. 1.6 V was obtained when the reader-tag distance was 40 mm.

2 GHz 평면 테이퍼형 전력 분배/결합회로의 수정된 구조 연구 (On a Modified Structure of Taper Type Planar Power Divider/Combiner at 2 GHz)

  • 한용인;김인석
    • 한국전자파학회논문지
    • /
    • 제13권10호
    • /
    • pp.1005-1016
    • /
    • 2002
  • 본 논문에서는 2 GHz 대역에서 하나의 입력과 다수의 출력을 가지는 [10]에서 제시 한 평면 Taper 혈의 전력 분배/결합기의 수정한 구조와 접지평면에 PBG(Photonic Band Cap) 구조를 적용한 형태의 전력 분배/결합 회로를 제안한다. 제안하는 구조의 전기적 특성을 걱정하는 파라메터들을 HFSS 시뮬레이션을 이용하여 분석하였다. 입력 정한 그리고 각 출력 판에서 출력 신호의 균형과 위상의 선형성을 위해 회로의 중앙에 하나의 원형 모양을 에칭 제거하였다. 또 본 논문에서 제안한 구조의 1:2와 1:3 전력 분배 / 결합기와 [10]의 구조와 5-Parameter를 비교ㆍ분석하였다. 결과적으로 본 연구에서 제시하는 수정된 형태를 적용할 경우 기존의 전력 분배/결합기의 반사손실 특성이 2 GHz에서 20 dB 이상 개선되었고. 이에 추가하여 PBG 구조를 적용하면 또 18 dB 이상 개선된 특성을 보였다. 대역폭 또한 증가되는 것을 확인하였다.

톱니 모양의 Perturbation을 갖는 편파 Diversity 용 광대역 마이크로스트립 안테나 (Broad Band Microstrip Antenna with Saw Tooth Perturbations for Polarization Diversity)

  • 김태홍;노근식;박천석
    • 한국전자파학회논문지
    • /
    • 제11권4호
    • /
    • pp.505-513
    • /
    • 2000
  • 본 논문에서는 편파 다이버서티(j:X)larization diversity)용 광대역 안테나에 대한 성능을 개선하기 위한 새로운 구조를 제안하였다. 이중 편파 마이크로스트립 안테나를 구현하기 위하여 십자형 개구변을 두었고, 개구면 위와 아래에 두 j:X)rt가 서로 수직이 되도록 급전부를 셜계하였다. 그리고 방사소자와 급전부에 air gap을 주었으며 후 방 방사를 줄이기 위해 아래 급전부로부터 $\lambda$/4 떨어뜨려서 반사판을 두었다. 더욱 넓은 대역폭을 가지도록 방 사 패치에 톱니 모양의 perturbation을 주었으며, 패치의 perturbation 효과에 의해 안테나 크기가 줄어들게 됨으 로써 배열 안테나의 크기도 상당히 줄어들었다. 제안된 단일 소자 안테나를 이용하여 $1\times4$ 배열 안테나 구조를 가진 PCS 기지국용 편파 다이버시티 안테나 를 제작하였다. 단일 소자 안테나는 각각 port 당 10.3 %, 11.3 %(VSWR<1.3)의 대역폭을 가지고 두 port간의 분리도가 -40 dB 이상이다. 또한 배열 안테나의 대역폭은 각각 13.2 %, 12.7 %(VSWR <1.3)이고 -36 dB의 분 리도와 10 dB의 XPD를 가진다.

  • PDF

Ku-밴드 위성통신을 위한 송수신겸용 마이크로스트립 패치 안테나 설계 (Design of Ku-Band Tx/Rx Microstrip Patch Antenna for Satellite Communications)

  • 김규성;김태우;최재훈
    • 한국전자파학회논문지
    • /
    • 제10권7호
    • /
    • pp.1138-1147
    • /
    • 1999
  • 본 논문에서는 단일 패치 안테나로 송수신을 동시에 수행할 수 있는 두 가지 형태의 Ku-밴드 위성통신 용 $2\times$ 마이크로스트립 패치 안테나 구현방안을 제시하였다. 첫 번째 형태는 단일급전 이중공진형 안테나로 9 90도 굽은 단일 급전선과 십자슬맛을 이용한 개구변 결합 급전방식을 적용하여 단일패치 방사소자에서 이중 공진과 서로 다른 직교면파를 만드는 방안을 제시하였으며. 두 번째 형태는 이중급전 이중공진형 안테나로 마이크로스트립 급전과 개구연 급전을 혼합해서 서로 다른 편파를 만들고 패치안테나에서 이중공진을 구현하 는 방안을 제시하였다. 특히 이중급천 이중공진형 안테나의 경우는 공기층을 삽입하여 대역폭을 확장하는 기 술을 적용하였다. 측정된 안테나의 성능을 살펴보면 두가지 형태의 안테나 모두 송수선 겸용안테나로서 동작 됨을 확인하였고, 이중급전 이중공진형 안테나의 경우 대역폭, 편파분리도의 성능이 우수함을 나타냈다.

  • PDF

Frontiers in Magneto-optics of Magnetophotonic Crystals

  • Inoue, M.;Fedyanin, A.A.;Baryshev, A.V.;Khanikaev, A.B.;Uchida, H.;Granovsky, A.B.
    • Journal of Magnetics
    • /
    • 제11권4호
    • /
    • pp.195-207
    • /
    • 2006
  • The recently published and new results on design and fabrication of magnetophotonic crystals of different dimensionality are surveyed. Coupling of polarized light to 3D photonic crystals based on synthetic opals was studied in the case of low dielectric contrast. Transmissivity of opals was demonstrated to strongly depend on the propagation direction of light and its polarization. It was shown that in a vicinity of the frequency of a single Bragg resonance in a 3D photonic crystal the incident linearly polarized light excites inside the crystal the TE- and TM-eigen modes which passing through the crystal is influenced by Brags diffraction of electromagnetic field from different (hkl) sets of crystallographic planes. We also measured the faraday effect of opals immersed in a magneto-optically active liquid. It was shown that the behavior of the faraday rotation spectrum of the system of the opal sample and magneto-optically active liquid directly interrelates with transmittance anisotropy of the opal sample. The photonic band structure, transmittance and Faraday rotation of the light in three-dimensional magnetophotonic crystals of simple cubic and face centered cubic lattices formed from magneto-optically active spheres where studied by the layer Korringa-Kohn-Rostoker method. We found that a photonic band structure is most significantly altered by the magneto-optical activity of spheres for the high-symmetry directions where the degeneracies between TE and TM polarized modes for the corresponding non-magnetic photonic crystals exist. The significant enhancement of the Faraday rotation appears for these directions in the proximity of the band edges, because of the slowing down of the light. New approaches for one-dimensional magnetophotonic crystals fabrication optimized for the magneto-optical Faraday effect enhancement are proposed and realized. One-dimensional magnetophotonic crystals utilizing the second and the third photonic band gaps optimized for the Faraday effect enhancement have been successfully fabricated. Additionally, magnetophotonic crystals consist of a stack of ferrimagnetic Bi-substituted yttrium-iron garnet layers alternated with dielectric silicon oxide layers of the same optical thickness. High refractive index difference provides the strong spatial localization of the electromagnetic field with the wavelength corresponding to the long-wavelength edge of the photonic band gap.

U-Slot 패치를 이용한 광대역 안테나의 설계에 관한 연구 (A Study on the Design of Wideband Antenn as using U-Slot Patches)

  • 김원배
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제54권3호
    • /
    • pp.180-185
    • /
    • 2005
  • Microstrip antennas generally have a lot of advantages that are thin profile, lightweight, low cost, and conformability to a shaped surface application with integrated circuitry. In addition to military applications, they have become attractive candidates in a variety of commercial applications such as mobile satellite communications, the direct broadcast system (DBS), global positioning system (GPS), and remote sensing. Recently, many of the researches have been achieved for improving the impedance bandwidth of microstrip antennas. The basic form of the microstrip antenna, consisting of a conducting patch printed on a grounded substrate, has an impedance bandwidth of $1\~2\%$. For improvement of narrow bandwidth of microstrip patch, we were designed U-slot microstrip patch antenna in this paper. This antenna had wide bandwidth for all personal communication services (PCS) and IMT-2000. For the design of U-slot microstrip patch antenna using a finite difference time domain(FDTD) method. This numerical method could get the frequency property of U-slot patch antenna and the electromagnetic fields of slots.

FDTD 법을 이용한 광대역 전자기 결합 마이크로스트립 안테나의 설계 (Design of the Electromagnetic Coupling Wideband Microstrip Antenna using FDTD Method)

  • 장용웅;신호섭;김남;박익모;신철재
    • 한국전자파학회논문지
    • /
    • 제9권4호
    • /
    • pp.473-482
    • /
    • 1998
  • 본 논문에서는 유한차분 시간영역법(FDTD)를 이용하여 단일 마이크로스트립 안테나와 기생소자를 갖는 광 대역 마이크로 스트립 안테나의 특성을 해석하고, 최대 대역폭을 갖는 안테나를 설계하였다. 유한차분 시간영역 법에 의한 수치 해석 결과뜰 Fourier 변환하므로 주파수 영역에서의 반사손실, 입력 임피던스, 복사 패턴 동의 특성을 계산하였다. 이 안테나의 구동소자의 폭, 구동소자와 기생 소자 사이의 간격, 기생소자의 폭과 넓이 변화 에 따라 안테나의 입력 임피던스 및 반사손실, 전압 정재파비 둥의 특성이 변하고, 광대역 특성을 가진다. 따라서 서로 다른 소자틀은 다른 주파수에서 공진되고, 이러한 공진이 대역폭올 향상시킨다. 계산 및 측정한 결과, 결합성을 갖는 마이크로스트립 안테나는 단일 마이크로스트립 안테나의 면적에 약 2배 증가한 반면, 대역폭은 단일 마이크로스트립 안테나에 비해 약 4배 이상 개선되었다. 이러한 계산 결과들은 본 실험의 측정치와 비교적 잘 일치하였다.

  • PDF