DOI QR코드

DOI QR Code

Small RFID Tag Antenna Based on Thin-film Deposition Process

박막 증착공정을 사용하여 구현된 초소형 RFID 태그 안테나

  • Published : 2009.04.01

Abstract

Small RFID tag antenna were fabricated on Si substrate and their physical and electrical properties were evaluated. With decreasing the size of tag antenna on Si substrate, small SMD-type RFID tags could be fabricated, which is very useful for various applications including PCB tracking. Firstly, electromagnetic properties on tag antenna pattern were simulated with HFSS. The setup frequency was 13.56 MHz of HF-band RFID. The line-width and line-gap were modeled in the range of $50{\sim}200{\mu}m$. S parameters, SRF, and Q value were calculated from the model. When the line-width and line-gap were 100 urn and the loop-turn was 10, the SRF was 80 MHz and the Q value was ca. 9. When the microstrip antenna pattern of aluminum was fabricated by using DC sputtering, Vpp of ca. 1.6 V was obtained when the reader-tag distance was 40 mm.

Keywords

References

  1. K. Domdouzis, B. Kumar, and C. Anumba, 'RFID applications: A brief introduction', Adv. Engineering Informatics, p. 350, 2007
  2. E. Ngai, K. Moon, F. Riggins, and C. Yi, 'RFID research: An academic literature review (1995-2005) and future research directions', Int. J. Production Economics, p. 510, 2008
  3. P. Costa, 'Tracking PCBs with RFID tags', Onboard Technology, p. 18, 2007
  4. 윤남원, 권영준, 신봉조, 박근형, '13.56 MHz RFID 태그 집적회로 설계', 전기전자재료학회논문지, 18권, 4호, p. 309, 2005 https://doi.org/10.4313/JKEM.2005.18.4.309
  5. M. Usami, 'An ultra small RFID chip: $\mu$- chip', Proc. RFIC, p. 241, 2004
  6. Maxell coil-on-chip RFID tag, http://www.maxell-usa.com/rfid/coil_on_chip.htm
  7. 금민종, 김경환, '스퍼터링법을 이용한 OLED용 Al 음전극 제작', 전기전자재료학회논문지, 18권, 8호, p. 729, 2005
  8. 윤석범, 'DC 스퍼터링 증착에 의한 Al 전극을 갖는 전계발광소자 제작', 전기전자재료학회논문지, 13권, 5호, p. 376, 2000
  9. J. Burghartz and B. Rejaei, 'On the design of RF spiral inductors on silicon', IEEE trans. on Electron Devices, Vol. 50, p. 718, 2003 https://doi.org/10.1109/TED.2003.810474