• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.1-5
• /
• 2015

Recently, data throughput of smart electric devices increases dramatically. There is a great interest in a new technology which exceeds the limit of electrical transmission method. Optical PCB can supplement the weakness of electrical signal processing, the research for optical PCB is very active. In this paper, we propose the thermal imprint lithography process to fabrication optical layer of optical PCB and experiment to optimize the process conditions. We confirm process time, pressure, process temperature, demolding temperature and fabricate optical interconnection structure which has $45^{\circ}$ tilted mirror surface for confirm the interconnection efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.651-654
• /
• 2007

Anthracene derivatives, 9,10trimethylsilylanthr - acene(SA) and bis(2-phenylethynyl)trimethylsilyl anthracene(Si-BPEA) were synthesized and their emission properties were studied with UV and PL spectrometers. The PL maxima of anthracene, SA, bis(2-phenylethynyl)anthracene (BPEA), Si-BPEA were obtained at 401, 438, 475, 478nm, respectively. The electro-optical properties OLED devices made with these anthracene derivatives were discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.839-842
• /
• 2004

We present a fast-switching electro-optical device based on flexoelectro-optic effect in short pitch cholesterics oriented in uniform lying helix texture. The device has two operating modes: amplitude and phase modulation mode. The amplitude modulation mode is a fast in-plane switching of the device optic axis that enables to achieve a high percent of modulation of the transmitted light intensity whereas the phase mode gives a continuous change of the refractive index and thus of the phase shift of the transmitted light. By using a small concentration of diacrylate monomer and selecting the illumination conditions we have been able to create a inhomogeneous polymeric network mostly localized at both substrate surfaces and stabilize the two switching modes.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.80-86
• /
• 2009

The variation of the electrical characteristics of thin-film transistors (TFTs) causes a non-uniform image quality problem, and the differential aging of organic light-emitting diode (OLED) devices causes an image-sticking problem. A video data correction method is proposed herein as an effective solution to the non-uniform electro-optical characteristics of the pixels in activematrix organic light-emitting diode (AMOLED) displays. The results of the simulation that was conducted show that the proposed method successfully senses the electrical characteristics of TFTs and the degradation of OLEDs and effectively compensates for them.

• 한국소음진동공학회논문집
• /
• 제15권2호
• /
• pp.156-160
• /
• 2005

We design a new actuator of 3-axis motion for high performance optical devices. The actuator makes it possible to control the tilting motion by using moving magnet and PCB-coil, which have benefits in price and manufacturing. To predict the characteristics of the actuator, especially the effect of moving magnet, finite element method and electro-magnetic analysis were used. By comparing simulation data with experimental results, we verified the accuracy of the simulation and the superiority of the present.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.125-128
• /
• 1998

The electro-optical properties of PDLCs ( Polymer Dispersed Liquid Crystals ) that have been interested for applications to projection display devices lately are significantly improved. For this improvement, we optimized not only the material parameters of liquid crystal and polymer but also the process conditions. Using TL series liquid crystals and polymer PN393 provided from Merck, we obtained the optimized process conditions such as cell gap, LC concentration, curing temperature and curing time. Under these conditions, we have achieved PDLC cells of threshold voltage 2.6V. contrast ratio 260 and negligible hysteresis.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2006년도 ISMP 2006
• /
• pp.67-73
• /
• 2006

A system in package (SiP) generally contains a variety of systems such as analog, digital, optical and micro-electro-mechanical systems, integrated in a system-level package connected through a substrate. However, there are many electrical and mechanical reliability issues including the reliability issue for embedded structures. A mismatch of thermal coefficients of expansion among packaging materials and devices can lead to warping or delamination in the package. In this study, the effect of material properties of underfill, such as Young's modulus and CTE, are investigated through FEM simulation. Experimental investigation on the warpage of the package is also carried out to verify the simulation results. The results show that the reliability of the system in package is closely related to the material properties of underfill. The results of this study provide a good guidance for the material selection when designing the system in package.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.133-137
• /
• 2014

The recent development of electro-optic devices and anticorrosion media has made it necessary investigate infrared optical systems with solid-solid interfaces of materials with amorphous characteristics. One of the most promising classes of materials for these purposes seems to be chalcogenide glasses, which are based on the Ge_Sb_Se system, have drawn much attention because of their use in preparing optical lenses and fibers that are transparent in the range of 3-12 um. In this study, a standard melt-quenching technique was used to prepare amorphous Ge_Sb_Sechalcogenideto be used in the design and manufacture of infrared optical products. The results of structural, optical, and surface roughness analyses of high purity Ge_Sb_Sechalcogenide glasses after various annealing processes reported.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.598-603
• /
• 2016

The recent development of electro-optic devices and anticorrosion media has led to the necessity to investigate infrared optical systems with solid-solid interfaces of materials that often have the characteristic of amorphousness. One of the most promising classes of materials for those purposes seems to be the chalcogenide glasses. Chalcogenide glasses, based on the Ge-Sb-Se system, have drawn a great deal of attention because of their use in preparing optical lenses and transparent fibers in the range of 3~12 um. In this study, amorphous Ge-Sb-Se chalcogenide for application in an infrared optical product design and manufacture was prepared by a standard melt-quenching technique. The results of the structural, optical and surface roughness analysis of high purity Ge-Sb-Se chalcogenide glasses are reported after various annealing processes.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.731-735
• /
• 2003

Ti-indiffused LiNbO$_3$waveguide have been used to various high speed optical device based on electro-optic effect such as modulators, switches, and sensor, etc. In order to high speed modulation of optical modulator have, one of the further devices, needed to increasing of electrode surrounding air by LiNbO$_3$dry etching because of impedance matching for optical and RF phase velocity between waveguide and electrode. We studied property of LiNbO$_3$dry etching after waveguide patterning lot optical modulation by using neutral loop discharge (NLD) plasma.