• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.246-248
• /
• 2005

본 연구에서는 화력발전의 보일러-터빈 시스템에 DMC(Dynamic Matrix Control) 기법을 적용한다. 고정된 동작점 모델들 간의 내삽(Interpolation)을 이용하여 실시간으로 계단응답모델을 계산 및 개선하고 이를 기반으로 제어를 실행한다. 제시된 제어 기법은 화력발전의 보일러-터빈 시스템을 대상으로 한 모의실험을 통하여 그 효용성을 나타낸다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.999-1000
• /
• 2008

150W의 정격을 가지는 150W-CDM, HCI, CMH 세라믹 메탈 할라이드 램프의 음향공명주파수를 계산하여 예측하고 Half-Bridge구조의 Inverter로 각 램프를 점등하여 음향공명이 발생할 경우와 발생하지 않을 경우의 램프 특성을 분석한 결과 음향공명 발생시 30Hz이하의 낮은 주파수의 전류 신호가 포함됨을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.571-574
• /
• 1997

항법장치의 핵심요소인 가속도센서와 자이로센서는 선형거리추측(Linear position estimation)과 각 변위 추측(orientation estimation)시 출력 데이터에 포함된 오차성분의 적분에 의하여 시간이 증가함에 따라 선형거리 오차와 각 변위 오차가 누적된다. 이에 따라 본 논문에서는 정밀한 항법을 위한 저가의 IMU (Inertial Measurement Unit)를 설계하고, 오차성분의 사전해석을 통하여 정확한 오차모델을 찾는데 그 목적이 있다.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1618-1620
• /
• 1997

A GaAs schottky diode with taper field plate is proposed to increase breakdown voltage. Breakdown voltage is calculated by device simulator MEDICI. The GaAs schottky diode with taper gate which has $5.7^{\circ}$ taper angle have shown 45% increase in the breakdown voltage compared with conventional field plate GaAs schottky diode.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2423-2425
• /
• 2000

A wireless communication module for multiple PLC was developed. The function of the developed system are dual communication, concurrent multiple communication. PLC control, d interpretation of PLC command, and A/D D/A converting. The multiple communication approach is based on master-slave control concept. To show validity of the developed module, severial experiments are illustrated.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2183-2185
• /
• 2000

This paper presents an auxiliary beam-assisted adaptive compensation technique applied to alleviate the problem of LDV's body vibration. The LMS algorithm is applied to adaptively compensate the body vibration utilizing the reference signal provided by the auxiliary beam. The usefulness of the proposed technique is verified via computer simulations performed for diverse types of target signals and body vibration.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.271-280
• /
• 2006

This paper proposes a new approach to solve robust $H{\infty}$ control problems for uncertain continuous-time descriptor systems. Necessary and sufficient conditions for robust $H{\infty}$ control analysis and design are derived and expressed in terms of a set of LMIs. In the proposed approach, the uncertainties are allowed to appear in all system matrices. Furthermore, a couple of assumptions that are required in earlier design methods are not needed anymore in the present one. The derived conditions also include several interesting results existing in the literature as special cases.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.79-86
• /
• 2013

We describe a neural stimulator front-end with arbitrary stimulation waveform generator and adaptive supply regulator (ASR) for visual prosthesis. Each pixel circuit generates arbitrary current waveform with 5 bit programmable amplitude. The ASR provides the internal supply voltage regulated to the minimum required voltage for stimulation. The prototype is implemented in $0.35{\mu}m$ CMOS with HV option and occupies $2.94mm^2$ including I/Os.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.375-378
• /
• 2004

In this paper, we fabricated pantacene TFTs using PVP copolymer and cross-linked PVP as gate insulator on glass and plastic (PET) substrate. Depending on the density of PVP and poly (melamine-co-formaldehyde) the performance has been changed. We obtained the best performance with the mobility of 0.12cm2/V sec and the on/off current ratio of $1.19{\times}10^6$ for the case of $10wt\%$ PVP copolymer mixed with $5wt\%$ poly(melamine-co-formaldehyde). Additionally using OTFTs with the above PVP gate insulator, we fabricated the integrated circuit including inverter which produced the gain of 5.56 on the glass substrate and gain of 9.7 on the plastic (PET) substrate. And the threshold voltage was respectively +8V and +14v$ldots$

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.569-572
• /
• 2005

This paper proposed the design and implementation of a DSP platform for the various multimedia streaming. The DSP platform synchronizes with host PC to configure DSP and to transmit multimedia streaming through PCI. The suggested DSP platform decodes high-capacity video/audio data using the suggested high-speed FIFO, CPLD and memory interface. The buffer control techniques is proposed in other to avoid the under/over-run of the audio/video data during the audio/video decoding. For the DSP platform test, host PC transmits program stream(PS) that consists of the MPEG-2 video MP@ML and 5.1ch AC3 audio data (Coyote.mov file, half hour running time) to DSP platform. The DSP platform plays continuously back the high sound-quality audio and high-definition video at once.