• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.629-633
• /
• 2001

Electrical properties of the $\alpha$-In$_2$Se$_3$ single crystals grown by use of the Bridgman technique were examined in the transition temperature range between $\alpha$-phase and $\beta$-phase. $\alpha$-In$_2$Se$_3$ single crystal has ' the rhombohedral structure and lattice constants are a=4.025 $\AA$, c=28.771 $\AA$ in c-axis. The transition temperatures of the stoichiometric $\alpha$-In$_2$Se$_3$ single crystal is 198.8$^{\circ}C$ according to the specimens. The temperature of $\alpha$longrightarrow$\beta$ phase transition decreased but the temperature of $\beta$longrightarrow$\alpha$ phase transition increased as the number of heating-cooling cycle increased.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.297-300
• /
• 2012

Lead-free (1-x)$(Na_{0.5}K_{0.5})NbO_3-xLiNbO_3$, i.e., NKN-LNx (x=0.0, 0.1, 0.2, 0.3, 0.4 mol) was prepared using the conventional solid state reaction method. The effects of LN mixing on the ferroelectric properties of NKN-LNx ceramics were studied using a dielectric constant and P-E (Polarization-electric field) measurements. Ferroelectricity was observed in the composition for x approximately varying between 0.0 and 0.4. Minimum remanent polarization $2P_r=5C/cm^2$ was achieved in the composition for x = 0.2. The ferroelectric phase transition temperature $T_C$ increased with increasing LN content. The ferroelectric phase transition of NKN-LNx ($x{\geq}0.1$) is a second-order phase transition, and that of NKN-LNx ($x{\leq}0.2$) is a first-order phase transition. These results indicate that the ferroelectric phase transition temperature of NKN-LNx change from that of second-order to weak first-order phase transition according to the LN content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.119-121
• /
• 1993

Two dimensional phase transition and three dimensional propagation of layer structures of liquid crystal film are investigated by using surface second harmonic generation method. We have found a distinctive first order phase transition between a monolayer phase and a stable 3-layer phase of 8CB liquid crystal film.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.266-266
• /
• 2013

We show a set-up of poly (4,4'-aminotriphenylene hexafluoroisopropylidenediphthalimide) (6F-TPA PI)/Al sample in which holes are injected by photoelectron emission process instead of direct charge carrier injection via metal electrode. In this process, an irreversible electrical phase transition of 6F-TPA PI is found in contrast to the Al/6F-TPA PI/Al structure, leading to a write-once-readmany behavior. The photoelectron spectroscopy results measured before and after the switching process revealed that the irreversible electrical phase transition of 6F-TPA PI is attributed to the chemical modification of the carbonyl group in phthalimide moiety.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.97-103
• /
• 2014

Phase transition properties of the copolymer films of polyvinylidene fluoride (PVDF) and trifluoroethylene(TrFE), P(VDF-TrFE), were studied with X-ray diffraction (XRD) and polarization modulated ellipsometry (PME). XRD studies on both Langmuir-Blodgett (LB) films and spin coated films exhibit conversions from ferroelectric phase to paraelectric phase at $108{\pm}2^{\circ}C$ on heating and paraelectric phase to ferroelectric phase at $78{\pm}2^{\circ}C$ on cooling. The presence of the ferroelectric-paraelectric phase transition is also confirmed by the PME technique for the first time in this study. PME was proved to be a very sensitive tool in the measurement of the structural changes at the nano-thickness films.

• Transactions on Electrical and Electronic Materials
• /
• 제5권6호
• /
• pp.241-243
• /
• 2004

The phase transition between amorphous and crystalline states in chalcogenide semiconductor films can be controlled by electrical or pulsed laser beam; hence some chalcogenide semiconductor films can be applied to electrically write/erase nonvolatile memory devices, where the low conductive amorphous state and the high conductive crystalline state are assigned to binary states. In this letter, the characteristics of phase transition in differential chalcogenide thin film are investigated. Al was used for the electrode as the thickness of 100, 300, 500 nm, respectively.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.94-97
• /
• 2018

Lead zirconate titanate/poly-vinylidene fluoride (PZT/PVDF) piezoelectric devices were fabricated by incorporating carbon nanotubes (CNTs), for use as flexible energy harvesting devices. CNTs were added to maximize the formation of the ${\beta}$ phase of PVDF to enhance the piezoelectricity of the devices. The phase transition of PVDF induced by the addition of CNTs was confirmed by analyzing the X-ray diffraction patterns, scanning electron microscopy images, and atomic force microscopy images. The enhanced output efficiency of the PZT/PVDF piezoelectric devices was confirmed by measuring the output current and voltage of the fabricated devices. The maximum output current and voltage of the PZT/PVDF piezoelectric devices was 200 nA and 350 mV, respectively, upon incorporation of 0.06 wt% CNTs.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.641-646
• /
• 2004

We report the changes of the microwave reflection coefficients S$_{11}$ of copper(II)-phthalocyanine (CuPc) thin films by using a near-field microwave microscope(NSMM) in order to understand the phase transition of CuPc. For a NSMM system, a high-quality microstrip resonator coupled with a dielectric resonator was used. CuPc thin films were prepared on the pre-heated glass substrates using a thermal evaporation method. The reflection coefficients S$_{11}$ of CuPc thin films were changed by the dependence on the substrate pre-heating temperatures. By comparing reflection coefficient S$_{11}$ and crystal structures, we found the phase transition of CuPc thin films from $\alpha$-phase to $\beta$-phase at the substrate heating temperature 200 $^{\circ}C$./TEX>.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.73-76
• /
• 1992

The amorphous phase of bulk and thin film in the As-Se-S-Ge system was observed by X-ray diffraction. Thermal analysis using DSC, DTA and TGA method has been used for the determination of the glass transition temperature, Tg. The glass transition temperature, Tg for the composition were $238^{\circ}C$ in $As_{40}Se_{15}S_{35}Ge_{10}$ and $231^{\circ}C$ in $AS_{40}Se_{25}S_{25}Ge_{10}$ and $As_{40}Se_{50}Ge_{10}$. The phase seperation of continuous phase and dispersive phase was observed by the optical texture of the polarizing microscope. Also, the glass transition temperature of the thin film was near $200^{\circ}C$. As the results of SEM-EDS analysis, the phase transition of the films by thermal treatment and light illumination was the amorphous to amorphous.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.491-494
• /
• 2000

Conductive Langmuir-Blodgett(LB) films have recently attracted much interest from the viewpoint of ultrathin film conductors at the molecular level. The result shows that the Maxwell-displacement-current(MDC) measuring technique is useful in the detection of phase-transition over the entire range of molecule areas. At the liquid-solid phase transition, a striking feature in the present current measurement was observed; the I-A isotherm for a DPPC monolayer has sharp bend. Dynamic behavior of monolayers in the presence of an external field was also investigated using the current-measuring technique. Dynamic behavier of DPPC monolayer was measured by displacement current when the molecules are stimulated by pressure velocity. As result, it is known that current is generated of higher current pe마 as compression velocity become faster. Also, in order to clarify the reorganization of the lipid monolayers, it is instructive to plot the relationship between I and 1/$A^2$.