• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.50-63
• /
• 2007

The development of domestic plant specific emission factors is very important to estimate reliable national emissions management. This study, for the reason, was carried out to obtain advances emission factor for Carbon Dioxide ($CO_2$) by source-specific emission tests from the iron and steel industry sector which is well known as one of the major sources of greenhouse gases ($CO_2$). Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$. There was no good information available on $CO_2$ plant specific emission factors from the iron and steel industry in Korea so far. The major emission sources of $CO_2$ examined from the iron and steel manufacturing precesses were a hot blast stove, coke oven, sintering furnace, electric arc furnace, heating furnace, and so on. In this study, the concentration of $CO_2$ from the hot blast stove process was the highest among all processes. The $CO_2$ emission factors for a ton of Steel and Iron products (using B-C oil) were estimated to be 0.315 $CO_2$ tonne (by Tier 3 method) and 4.89 $CO_2$ tonne. In addition, emission factor of $CO_2$ for heating furnace process was the highest among all process. Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.260-260
• /
• 2013

Multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and technological applications in magnetic/ferroelectric data-storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3 $ is a typical multiferroic material with a room temperature magnetoelectric coupling in view of high magnetic-and ferroelectric-ordering temperatures (Neel temperature $T_N$~647 K and Curie temperature $T_C$~1,103 K). Rare-earth ion substitution at the Bi sties is very interesting, which induces suppressed volatility of Bi ion and improved ferroelectric properties. At the same time, Fe-site substitution with magnetic ions is also attracting, and the enhanced ferromagnetism was reported. In this study, $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$ (x=0, 0.05 and 0.1) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ or 24 h to produce $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ nd sintered in air for 30 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies).

• Archives of design research
• /
• v.21
• /
• pp.99-106
• /
• 1997

There were the changes of shapes and color tones when the soil materials e.g. Blue-Porcelain, White-Porcelain, Bunchong, mixed A and B, mullite, Sanchong and Ongki - used by most domestic ceramic artists - were glazed at $ 950^{\circ}C,; 1200^{\circ}C,; 1250^{\circ}C,; 1280^{\circ}C,;1300^{\circ}C$ After the materials were dried out at 120t: in an electric oven, they were mixed with water, keeping the percentage of moisture content 25% and kneaded specimens which are hexahedron by $$ 250{\times}30{\times}8mm$$were produced and dried after calibrated at 200mm interval with a vernier caliper. After the materials were dried and glazed, they showed few shape-changes at $950^{\circ}C$ but began to changed at $1200^{\circ}C$,especially Bunchong and Ongki made rapid changes. In the case of color-change, White-Porcelain changed very little. The color of Blue-Porcelain, mixed A and B, Sanchong, Mullite changed to ]aune brilliant as temperature went up but Bunchong and Ongki changed to dark brown or dark chocolate under the same conditions. This study aims at suggestion of the basic data which minimize failure rates by recognizing the property of the materials on the basis of this study and regulating shape-change phenomena and sensitive changes of color when ceramic artists work.

• Korean journal of food and cookery science
• /
• v.20 no.2
• /
• pp.119-125
• /
• 2004

Effects of various chemical additives and heat treatments were investigated on the wheat flour doughs and breads. Ammonium ferric citrate, Ca-citrate, CaCl$_2$, FeSO$_4$, MgCl$_2$and ZnO were mixed respectively to the flour up to 0.1% of flour dry weight basis. Ammonium ferric citrate and ferric sulfate showed no significant effects on the dough properties and magnesium sulfate, calcium chloride and zinc oxide increased elastic properties and optimum dough mixing time. However, calcium citrate and magnesium chloride showed no significant effects on the dough mixing properties. Most of chemicals were detrimental on the bread volume except MgSO$_4$ and CaCl$_2$. Breads with MgSO$_4$ and CaCl$_2$ retained the equal or slightly higher volume compared to control bread. Crumb and crust colors of breads with addition of chemicals were changed to lighter than that of control bread. L values both of crumb and crust increased with addition of chemicals except Ca-citrate. To inactivate the endogenous enzymes of flour, flour was roasted under electric oven, exposed to UV and microwave. Those heat treatments of flour increased dough stability and produced no dough breakdown after optimum mixing time. However, bread volume of heat-treated flour decreased.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.237-246
• /
• 2008

Four different pork loaves were made with two levels, HP/FP-3% and HP/FP-6%, containing 3.0 and 6.0% HP(hot air dried sweet persimmon powder)/FP(freezer dried sweet persimmon powder), respectively. HP and FP(3% and 6%) were added into ground pork loin separately. A control without persimmon powder were used for comparison. Patties were cooked to 74℃ in electric oven, after cooling, the aerobic packaged meat loaves were stored at 5℃. The moisture and crude ash were higher in the FP-6%, and the crude protein and crude fat were no different among the samples. The pH in control sample was significantly higher(p<0.05) than those of treatment group, however no significant difference was found among the 4 treatments. The TBARS(thiobarbituric reactive substance) values of all samples showed a tendency of increasing value along the storage days. The TBARS and a* value increased(p<0.05) as the addition ratio of HP/FP increased, respectively. With regard to microorganisms, the number of total aerobic bacteria were lower than 3.11 log10 CFU/g. In sensory evaluation, meat loaves containing persimmon powder resulted in a high overall acceptability, although they were not significantly different in overall acceptability.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.7-13
• /
• 1993

This survey was performed to investigate the holding amount of the various kinds of cooking tools of the farm and fishing villages in Chungnam area. The results were as follows: 1. The holding ratio of refrigerators was the highest (97.9%), and that of toasters was the lowest (1.9%) among the electric tools. 2. The holding ratio of gas-ranges was the highest (95.7%) and that of gas oven-ranges was the lowest (1.2%) among 4 kinds of gas tools under investigation. 3. The holding amount of pans was the highest among the cooking tools and that of wicker baskets was very high among the small cooking tools. The holding ratios of egg-cutters and lemon-squeezers were very low (4.1% and 2.9%, respectively). 4. The holding ratios of various kinds of cooking tools were related to the housewife's educational background and family income.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.257-274
• /
• 2018

The purpose of this study was to evaluate the effect of acid-treatment conditions on the surface properties of the RBM (Resorbable Blast Media) treated titanium. Disk typed cp-titanium specimens were prepared and RBM treatments was performed with calcium phosphate ceramic powder. Acid solution was mixed using HCl, $H_2SO_4$ and deionized water with 4 different volume fraction. The RBM treated titanium was acid treated with different acid solutions at 3 different temperatures and for 3 different periods. After acid-treatments, samples were cleaned with 1 % Solujet solution for 30 min and deionized water for 30 min using ultrasonic cleanser, then dried in the electrical oven ($37^{\circ}C$). Weight of samples before and after acid-treatment were measured using electric balance. Surface roughness was estimated using a confocal laser scanning microscopy, crystal phase in the surface of sample was analyzed using X-ray diffractometer. Surface morphology and components were evaluated using Scanning Electron Microscope (SEM) with Energy Dispersive X-ray spectroscopy (EDX) and X-ray Photoemission Spectroscopy (XPS). Values of the weight changes and surface roughness were statistically analyzed using Tukey-multiple comparison test (p=0.05). Weight change after acid treatments were significantly increased with increasing the concentration of $H_2SO_4$ and temperature of acid-solution. Acid-treatment conditions (concentration of $H_2SO_4$, temperature and time) did not produce consistent effects on the surface roughness, it showed the scattered results. From XRD analysis, formation of titanium hydrides in the titanium surface were observed in all specimens treated with acid-solutions. From XPS analysis, thin titanium oxide layer in the acid-treated specimens could be evaluated. Acid solution with $90^{\circ}C$ showed the strong effect on the titanium surface, it should be treated with caution to avoid the over-etching process.