• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.2040-2041
• /
• 2007

In this paper, the UHF PD(Partial Discharge) sensors for $SF_6$ insulated MV $SF_6$ switchgear have been proposed and related investigations have been performed in order to detect the PD which were produced inside the MV $SF_6$ switchgear. Firstly, the internal type UHF PD sensor based on spiral antenna theory has been developed. This type sensor is highly sensitive and has lowly effect on by on-site noise. Secondly, the external type UHF PD sensor was developed based on log periodic antenna concept. This type sensor is removable and detectable for operating switchgear. These sensors were designed and simulated using RF simulation tool. In order to verify the sensitivity of these sensors, we performed the on-site test using the mock-up switchgears including the artificial defects which were the protrusion on high voltage conductor, free moving metal particle and surface defect on insulator. These mock-up switchgear were installed on the test distribution line.

• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.449-470
• /
• 2016

Energy harvesting is an emerging technique that extracts energy from surrounding environments to power low-power devices. For example, it can potentially provide sustainable energy for wireless sensing networks (WSNs) or structural control systems in civil engineering applications. This paper presents a comprehensive study on harvesting energy from earthquake-induced structural vibrations, which is typically of low frequency, to power WSNs. A macroscale pendulum-type electromagnetic harvester (MPEH) is proposed, analyzed and experimentally validated. The presented predictive model describes output power dependence with mass, efficiency and the power spectral density of base acceleration, providing a simple tool to estimate harvested energy. A series of shaking table tests in which a single-storey steel frame model equipped with a MPEH has been carried out under earthquake excitations. Three types of energy harvesting circuits, namely, a resistor circuit, a standard energy harvesting circuit (SEHC) and a voltage-mode controlled buck-boost converter were used for comparative study. In ideal cases, i.e., resistor circuit cases, the maximum electric energy of 8.72 J was harvested with the efficiency of 35.3%. In practical cases, the maximum electric energy of 4.67 J was extracted via the buck-boost converter under the same conditions. The predictive model on output power and harvested energy has been validated by the test data.

• 한국항공운항학회지
• /
• 제30권2호
• /
• pp.1-6
• /
• 2022

Recently, the development of UAM, which was named by NASA as an alternative to solve the traffic and environmental problems caused by the rapidly progressing urbanization. When designing UAM, the location of lift fans greatly affects the core technology of the eVTOL type, distributed electric propulsion technology and aerodynamic performance of the vehicle. In this paper, a hybrid UAM model was designed using OpenVSP, an open source aircraft configuration modeling program, and aerodynamic analysis was performed according to the lift fans position change by the vortex lattice method. As a result, it is confirmed that the flight parameters and trailing wakes are stable by fixing the lift fan with the state rotated 0° to the flow direction of the aircraft during cruise flight. Also, OpenVSP is a suitable tool to be used in aircraft configuration modeling and design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권6호
• /
• pp.1689-1705
• /
• 2023

To deal with the potential XSS vulnerabilities in the source code of the power communication network, an XSS vulnerability detection method combining the static analysis method with the dynamic testing method is proposed. The static analysis method aims to analyze the structure and content of the source code. We construct a set of feature expressions to match malignant content and set a "variable conversion" method to analyze the data flow of the code that implements interactive functions. The static analysis method explores the vulnerabilities existing in the source code structure and code content. Dynamic testing aims to simulate network attacks to reflect whether there are vulnerabilities in web pages. We construct many attack vectors and implemented the test in the Selenium tool. Due to the combination of the two analysis methods, XSS vulnerability discovery research could be conducted from two aspects: "white-box testing" and "black-box testing". Tests show that this method can effectively detect XSS vulnerabilities in the source code of the power communication network.

• 정보보호학회논문지
• /
• 제28권5호
• /
• pp.1225-1231
• /
• 2018

FPGA(Field Programmable Gate Array)를 이용한 시스템 개발은 개발 시간 단축 및 비용 절감을 위해 제3자에게 아웃소싱하는 형태로 발전하고 있다. 이러한 과정에서 악의적인 기능 및 오작동을 유발하는 하드웨어 악성기능(Hardware Trojan)이 시스템에 유입될 위협 또한 증가하고 있다. 하드웨어 악성기능의 탐지를 위해 다양한 방법들이 제시되고 있으나 FPGA에 탑재되는 비트스트림을 직접 수정하는 형태의 하드웨어 악성기능은 기존에 제시된 방법으로 탐지하기 어렵다. 이러한 유형의 하드웨어 악성기능 탐지를 위해서는 비트스트림으로부터 구현된 회로를 식별 가능한 수준으로 역공학하는 과정이 필요하며, 회로를 구성하는 여러 요소 중 특히 신호의 입출력 흐름을 파악할 수 있는 연결 정보를 역공학하는 것이 중요하다. 본 논문에서는 FPGA 비트스트림으로부터 연결 정보를 복구하는 도구인 BIL을 분석하고 이를 개선하기 위한 방법을 제시한다.

• 한국항공우주학회지
• /
• 제42권9호
• /
• pp.779-788
• /
• 2014

저궤도 위성이 제한된 전력 내에서 임무를 성공적으로 수행하기 위해서는 효율적인 전력생산이 중요하다. 이를 위해 저궤도 소형위성의 전력계에서는 주로 MPPT (Maximum Power Point Tracking) 방식을 사용하여 태양전지에서 생산되는 전력을 조절한다. 본 연구에서는 소형 큐브위성(KAUSAT-5)에 적용될 퍼지 로직 기반의 MPPT 알고리즘을 제안하며, 제안된 방법의 유용성을 확인하기 위해 MATLAB/Simulink와 STK (Systems Tool Kit)를 연동하여 시뮬레이션을 수행하였다. Simulink와 STK를 이용하여 위성 궤도와 자세에 따른 태양 광량과 운용모드에 따라 변하는 부하용량에 대해 KAUSAT-5의 두 가지 지향모드에서 EBA(Energy Balance Analysis)를 수행하였고, 이를 통해 제안된 퍼지 로직 기반의 MPPT 알고리즘의 성능을 확인하였다. 제안된 퍼지 로직 기반의 MPPT는 가장 일반적인 방법의 하나인 P&O (Perturbation & Observation)와 성능을 비교하여 유용성을 확인하였다.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.15-22
• /
• 2011

Explosion and fire cause about 30 reported industrial major accidents a year by ignition source which discharge of electrostatic generated to flammable gas, vapor, dust and mixtures. It brings economically and humanly very large loss that accident was caused by fire and explosion from electrostatic discharge. Thus, it is very important that electrostatic discharge energy is to be control below not to be igniting flammable mixtures. There are two kinds of analysis model for electrostatic discharge, human body model and machine model. Human body model is available the parameter of human's electrical equivalent that capacitance is 100 pF, resistance is $1.5k{\Omega}$. To simulate and visualize the electrostatic discharge from human body need a very expensive and high voltage simulator. In this paper, we measured the value of capacitance and resistance concerned with test materials and sizing of specimen and the value of charged voltage concerned with test specimen and distance to develop an electrostatic charge/discharge simulating tool for teaching with which concerned industrial employee and students. The result of experiments, we conformed that the minimum ignition energy of methane-oxygen mixtures meets well the equation $W=1/2CV^2$, and found out that the insulating material and sizing of equivalent value having human body mode are the poly ethylene of 200 mm and 300 mm of diameter. Developed electrostatic charge/discharge simulating tool has many merits; simple mechanism, low cost, no need of electric power and so on.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권7호
• /
• pp.339-344
• /
• 2016

자동차 소프트웨어의 복잡성이 높아짐에 따라 안전문제가 중요해졌다. 그래서 이를 해결하기 위하여 Automotive SPICE 프로세스가 제안되었다. Automotive SPICE 프로세스 수행을 위해서는 통합된 관리 체계와 도구가 필요하다. 하지만 중소기업의 경우에는 인원과 자본이 부족하여 통합된 관리체계와 도구를 도입하기 힘들다. 따라서 Automtovie spice 최소 요구사항을 준수하는 HIS scope 항목을 목표로 해야 한다. 본 논문에서는 Automotive HIS scope 항목을 수행하는데 필요한 오픈 소스 기반 프로세스 관리 도구 시스템을 제안한다. 제안된 시스템으로 Automotive SPICE HIS scope 항목을 수행할 수 있으며, 수행 결과를 통하여 Automotive SPICE HIS scope 항목을 만족하는 것을 보였다.

• 한국정밀공학회지
• /
• 제5권1호
• /
• pp.84-93
• /
• 1988

The on-line detection of the chip flow is one of the most important technologies in com- pletly automatic operation of machine tool, such as FMS and Unmanned Factories. This problem has been studied by many researchers, however, it is not solved as yet. For the recognition of chip flow in this study, the dynamic cutting force components due to the chip breaking were measured by dynamometer of piezo-electric type, and the frequency components of cutting force were also analyzed. From the measured results, the effect of cutting conditions and tool geometry on the dynamic cutting force component and chip formation were investigated in addition to the relationships between frequency of chip breaking (fB) and side serrated crack (fC) of chip. As a result, the following conclusions were obtaianed. 1) The chip formations have a large effect on the dynamic cutting force components. When chip breaking takes place, the dynamic cutting force component greatly increases, and the peridoic components appear, which correspond to maximum peak- frequency. 2) The crater wear of tool has a good effect on the chip control causing the chiup to be formed as upward-curl shape. In this case, the dymamic cutting force component greatly increases also 3) fB and fC of chip are closely corelated, and fC of chips has a large effect on the change of the situation of chip flow and dynamic cutting force component. 4) Under wide cutting conditions, the limit value (1.0 kgf) of dynamic cutting force component exists between the broken and continuous chips. Accordingly, this value is suitable for recognition of chip flow in on-line control of the cutting process.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.903-910
• /
• 2014

선풍기는 유도 전동기에 의해 구동되는 축류형 날개를 가진 기계이다. 본 연구에서는 기본 설계된 선풍기의 날개를 바탕으로 스태킹 라인의 최적 설계를 통해 선풍기의 성능 향상을 목표로 하였다. 전산 해석을 위해 상용 툴인 Ansys 사(社)의 CFX 14.5를 이용하였고, 난류 모델은 k-${\omega}$ SST 를 사용하였다. 설계 변수는 스윕 각과 기울기 각으로 설정하였고, 유량과 토크를 목적함수로 설정하여 스태킹 라인의 최적화를 수행하였다. 최적화 결과 풍량이 증가하였고, 토크가 감소함을 확인 하였다. 최적화된 모델과 기본 모델은 KS C 9301을 이용하여 측정되었으며, 전산 해석 결과를 검증하였다.