• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.63-72
• /
• 2004

This study was conducted to determine the growth and properties of green soybean sprouts(Vigna umbellata Thunb.) in soil culture. Patkong which is a small grain variety was sawn on electric heated hot bed in the greenhouse. Temperature of the culture bed were respectively 17, 20, 25, and 30℃ and water temperature were respectively 14, 17, 20 and 25℃. The kinds of soil used for this study were upland soil, sand, peatmoss and Pearlite, loess, loess and activated carbon. BA was treated in the concentrations of 240 times, 80 times, 40 times besides control. High temperature of 25 and 30℃ increased sprout yield compared to lower temperature but caused to decay from 7 days after sawing. Thus, the most optimum temperature for soil culture was 20℃. The best soil was sand of which increased fresh weight of 850g during same period. Addition of BA was most effective to promote sprout growth in the concentration of 80 times. Compared to general soybean sprouts, green soybean sprouts were 50% higher in fiber but 72% lower in glucide. Vitamin B was 200% higher in green soybean sprouts but vitamin C was higher in general soybean sprouts.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.171-187
• /
• 2023

Objectives: Aircraft cabin cleaning work is characterized by being performed within a limited time in a narrow and enclosed space. The objective of this study was to evaluate the exposure levels to dust, ultra fine dust(PM2.5) and black carbon(BC) among aircraft cabin cleaners. Methods: Active personal air sampling for respirable dust(n=73) and BC(n=47) was conducted during quick transit cleaning(cabin general and vacuum-specific) and seat cover replacement and total dust and PM2.5 were area-air-sampled as well. Also, size distribution of particle was identified with the cleaning workers targeted. Dusts were collected with PVC filters using gravimetric analysis. The concentration of PM2.5 and the particle size distribution were measured with real-time direct reading portable equipment using light scattering analysis. The concentration of BC was measured by aethalometer(filter-based real-time light absorption analysis instrument). Results: The geometric mean of respirable dust was the highest at vacuum cleaning as 74.4 ㎍/m³, following by replacing seat covers as 49.3 ㎍/m³ and cabin general cleaning as 47.8 ㎍/m³ . The arithmetic mean of PM2.5 was 4.83 ~ 9.89 ㎍/m³ inside the cabin, and 28.5~44.5 ㎍/m³ outside the cabin(from bus and outdoor waiting space). From size distribution, PM_2.5/PM₁₀ ratio was 0.54 at quick transit cleaning and 0.41 at replacing seat covers. The average concentration of BC was 2~7 ㎍/m³, showing a high correlation with the PM2.5 concentration. Conclusions: The hazards concentration levels of aircraft cabin cleaners were very similar to those of roadside outdoor workers. As the main source of pollution is estimated to be diesel vehicles operating at airports, and it is necessary to replace older vehicles, strengthen pollutant emission control regulations, and introduce electric vehicles. In addition, it is necessary to provide as part of airport-inftastructure a stable standby waiting space for aircraft cabin cleaners and introduce a systematic safety and health management system for all workers in the aviation industry.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.2
• /
• pp.131-140
• /
• 2009

It has been repeatedly reported that a drainage system of a drained tunnel is deteriorated. And consequently the water pressure on the lining increases with time. However, little research on the watertight tunnel was found in the literatures. According to field measurements, leakage of the undrained tunnel has increased with time, which is completely opposite to the behavior of the drained tunnel. It is evident that the hydraulic deterioration of the tunnel lining changes the water pressure on the lining and the amount of leakage, thus the design coneept in terms of groundwater is not maintained tightly throughout the life time of the tunnel. The Segment lining is generally constructed as watertight. However, it is frequently reported that the leakage in the segment tunnel increases with time. It is also reported that the leakage is generally concentrated at the joints of the segments. In this study structural and hydraulic interaetion of the segment lining due to the hydraulic deterioration of the segments and the joints is investigated using the numerical modeling method. An electric utility tunnel below groundwater table is considered for the analyses. The effects of hydraulic deterioration of the segment lining are identified in terms of ground loading, water pressure and lining behavior. A remedial grouting measure for leakage is also numerically simulated, and its appropriateness is evaluated.

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.174-181
• /
• 2023

Five local governments along the Korea-Japan Sea (Jeju, Jeonnam, Gyeongnam, Busan, Ulsan) operate a joint countermeasure committee regarding the marine discharge of contaminated water from the Fukushima nuclear power plant by Japan's Tokyo Electric Power Plant. This study compared and analyzed citizen surveys, response strategies, and detailed action plans conducted by the Jeju Research Institute, Busan Research Institute, and Ulsan Research Institute as part of a study on countermeasures for the marine discharge of contaminated water from the Fukushima nuclear power plant in Japan. The purpose was to present basic data for the preparation of effective measures. As a result of the perception survey, all citizens of local governments showed a strong negative perception of marine discharge regardless of scientific research results, and it is expected that future fisheries and tourism industries will suffer great damage. In response strategies for each local government, building a control tower was found to be the most urgent task common to all local governments. It is judged that this is because it is necessary to break away from the organization-centered system and to respond to the function-centered system for effective response. In terms of response methods, while Jeju and Busan established response plans for each sector, Ulsan City focused on practical responses with step-by-step response measures according to the release time. In terms of content, the establishment of a marine product radiation inspection system and publicity to relieve public anxiety were important. As the marine discharge of contaminated water from the Fukushima nuclear power plant is scheduled to continue until 2030, strengthening the network for sharing research results and achievements among local government research institutes was deemed necessary.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.666-671
• /
• 2023

As international environmental regulations on ship emissions are gradually strengthened, interest in electric propulsion and hybrid propulsion ships is increasing, and various solutions are being developed and applied to these ships, especially stabilization of the power system and system efficiency. The direct current distribution system is being applied as a way to increase the power. In addition, verification and testing of safety and performance of marine DC distribution systems is required. As a result of establishing a DC distribution test bed, verifying the performance of the DC distribution (variable speed power generation) system, and analyzing fuel consumption, this study applied a variable speed power generation system that is applied to DC power distribution for ships, and converted the power output from the generator into a rectifier. A system was developed to convert direct current power to connect to the system and monitor and control these devices. Through tests using this DC distribution system, the maximum voltage was 751.5V and the minimum voltage was 731.4V, and the voltage fluctuation rate was 2.7%, confirming that the voltage is stably supplied within 3%, and a variable speed power generation system was installed according to load fluctuations. When applied, it was confirmed through testing that fuel consumption could be reduced by more than 20% depending on the section compared to the existing constant speed power generation system.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.4
• /
• pp.15-29
• /
• 2023

Objectives The purpose of this study is to systematically review the effects of Neuromuscular Electrical Stimulation treatment on muscle wasting in cancer patients. Methods Randomized controlled trials (RCTs) were searched from seven online databases (PubMed, Cochrane Library, EMBASE, China National Knowledge Infrastructure, Oriental Medicine Advanced Searching Integrated System, Korean studies Information Service System, Research Information Sharing Service. The selected RCTs were evaluated for methodological quality through the Cochrane RoB. Results A total of 126 articles were identified, and 4 randomized controlled trials were selected for systematic review. In one study, it was found that there were statistically significant improvements in the Health-Related Quality of Life (FACTH&N total score, p<0.001). Additionally, significant effects were observed in measurements that represented the size of the quadriceps muscle (cross-sectional area of Vastus lateralis and Rectus femoris, p=0.004), maximum muscle strength, the twitch response of resistance muscles, and voluntary activation (p<0.001). However, no significant differences were observed between the intervention and control groups in terms of quadriceps muscle strength in two other studies (p>0.05). Lastly, while one study showed no significant differences in muscle fiber characteristics between the two groups, it did report significant improvements in measurements related to mitochondria within muscle tissue and muscle strength in the intervention group (p<0.05). Conclusions Neuromuscular electrical stimulation can be a method used to improve muscle strength in muscle wasting of cancer patients, but it is difficult to see its effects as significant compared to other treatments.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3543-3548
• /
• 2023

Shutdown chemistry evolution is performed in nuclear power plants at each refueling outage (RFO) to establish safe conditions to open system and minimize inventory of corrosion products in the reactor coolant system (RCS). After hydrogen peroxide is added to RCS during shutdown chemistry evolution, corrosion products are released and are removed by filters and ion exchange resins in the chemical volume control system (CVCS). Shutdown chemistry evolution including RCS clean-up time to remove released corrosion products impacts the critical path schedule during RFOs. The estimation of clean-up time prior to RFO can provide more reliable actions for RCS clean-up operations and transients to operators during shutdown chemistry. Electric Power Research Institute (EPRI) shutdown calculator (SDC) enables to provide clean-up time by Co-58 peak activity through operational data from nuclear power plants (NPPs). In this study, we have investigated the results of EPRI SDC by shutdown chemistry data of Co-58 activity using NPP data from previous cycles and modeled the estimated clean-up time by EPRI SDC using average Co-58 activity of the NPP. We selected two RFO data from the NPP to evaluate EPRI SDC results using the purification time to reach to 1.3 mCi/cc of Co-58 after hydrogen peroxide addition. Comparing two RFO data, the similar purification time between actual and computed data by EPRI SDC, 0.92 and 1.74 h respectively, was observed with the deviation of 3.7-7.2%. As the modeling the estimated clean-up time, we calculated average Co-58 peak concentration for normal cycles after cycle 10 and applied two-sigma (2σ, 95.4%) for predicted Co-58 peak concentration as upper and lower values compared to the average data. For the verification of modeling, shutdown chemistry data for RFO 17 was used. Predicted RCS clean-up time with lower and upper values was between 21.05 and 27.58 h, and clean-up time for RFO 17 was 24.75 h, within the predicted time band. Therefore, our calculated modeling band was validated. This approach can be identified that the advantage of the modeling for clean-up time with SDC is that the primary prediction of shutdown chemistry plans can be performed more reliably during shutdown chemistry. This research can contribute to improving the efficiency and safety of shutdown chemistry evolution in nuclear power plants.

• Korean Journal of Poultry Science
• /
• v.45 no.1
• /
• pp.53-62
• /
• 2018

This study was performed to evaluate the effect of lemon and cranberry juice on meat quality of chicken thighs during cold storage. Experimental groups were chicken thigh meat dipped into distilled water (CON), 1% lemon juice (LJ), 1% cranberry juice (CJ), and a mixture of 0.5% lemon juice and 0.5% cranberry juice (LCJ). The meat quality traits were determined at day 0, 3, 6, and 9 during cold storage at $4^{\circ}C$. The pH value of all treatments was lower than that of the control (P<0.05). Total microorganisms of CJ and LCJ at day 9 was 6.94 and 6.76 log CFU/g, respectively, whereas that of the control was 7.51 log CFU/g. The $a^*$ value of CJ and LCJ was higher than that of CON and LJ during storage (P<0.05), whereas the $b^*$ value of LJ, CL, and LCJ was lower than that of CON at day 6 and 9 (P<0.05). Overall acceptability of all treatments was significantly higher than that of CON after day 3. Thiobarbituric acid reactive substances and volatile basic nitrogen values were lower than those of the CON after day 3 (P<0.05). Principle component analysis (PCA) of the aroma pattern of all treatments was closer together, whereas PCA of the CON was scattered with the increase in storage days. This result suggests that dipping the chicken thigh meat into the lemon and cranberry juice could be beneficial to enhance chicken thigh meat quality by retardation of total microbes, lipid oxidation, and protein decomposition.

• The korean journal of orthodontics
• /
• v.40 no.2
• /
• pp.106-114
• /
• 2010

Objective: The aim of this experimental study was to evaluate the effects of direct electrical current stimulation (DECS) on bone regeneration in response to an expansion of the inter-premaxillary suture in the rat. Methods: Sixteen 50 - 60 days old Wistar male rats were separated into two equal groups (control and experimental). Both groups were subjected to expansion, and 30-gram of force was applied to the maxillary incisors with helical-spring. In the experimental group, two metallic-screws were placed at lateral parts of the maxillary segments. Electrodes were connected to the screws. The device was activated with current adjustment to measure $10{\mu}A$ continuously and the current was monitored daily during the expansion and early-retention phase. Bone regeneration in the sutural area was histomorphometrically evaluated including new-bone area (${\mu}m^2$), bone perimeter (${\mu}m$), feret's diameter (${\mu}m$) and newly formed bone (%) parameters. Kruskal-Wallis rank and Mann-Whitney U tests were used for statistical evaluation at p < 0.05 level. Results: Statistical analysis showed significant differences between groups for all investigated histomorphometric parameters. New bone area (p = 0.002), bone perimeter (p = 0.004), feret's diameter (p = 0.002) and newly formed bone percentage (p = 0.002) measurements were significantly higher in the experimental group than the control group. Bone histomorphometric measurements revealed that bone architecture in the DECS group was improved. Conclusions: The application of DECS to an orthopedically expanded inter-premaxillary suture area during the early retention phase stimulated the formation of new bone.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.162-169
• /
• 2008

To determine suitable composition of nutrient solution according to soil textures in fertigation culture of cucumber using three strengths (S) of Yamasaki cucumber recipe, chemical changes of soil, growth characteristics and yield of cucumber were investigated. Electric conductivity of drainage solution was risen in all treatments, pH of loam soil was generally optimum level and that of sandy soil was high level. Photosynthetic rate in loam soil supplied the 1/2 S and transpiration rate in sandy soil supplied the 1.0 S were most low. Diffusive resistance in sandy soil supplied the 1.0 S was high. Chlorophyll contents was higher concentrations by the kinds of soil. Amount of drainage solution in sandy loam soil supplied the 1/2 S and loam soil supplied the 1.0 S were most much and little, respectively. Water absorption rate was the opposition to amount of drainage solution. Nutrient contents in soil except calcium were most high in the 1.0 S by the kinds of soil. Nutrient contents in leaves, nitrogen in sandy soil supplied 1.0 S, phosphorus in loam soil supplied 1/2 S, potassium in two soil supplied 1.0 S, calcium in loam supplied 1/2 S and sandy loam soil supplied 1.0 S, magnesium in loam soil supplied the 1/2 S was high. The growth and yield of fruit were more in loam than in sandy loam soil. Therefore, the suitable compositions of macro-nutrients for fertigation culture of cucumber were determined in loam and sandy loam soils as follows: In loam soil, they were $NO_3$-N 12.3, $NH_4$-N 1.0, P 3.0, K 5.9, Ca 5.7, Mg $3.5\;me{\cdot}L^{-1}$, whereas in sandy loam soil $NO_3$-N 11.7, $NH_4$-N 1.0, P 3.0, K 5.9, Ca 4.9, Mg $3.2\;me\;L^{-1}$.