• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권12호
• /
• pp.671-678
• /
• 2003

This paper proposes an expert system to generate automatically the test table of test system which can highly enhance the quality and productivity of product by inspecting quickly and accurately the defect device on the electronic circuit board tested. The expert system identifies accurately the tested components and the circuit patterns by tracing automatically the connectivity of circuit from electronic circuit database. And it generates automatically the test table to detect accurately the missing components, the misplaced components, and the wrong components for analog components such as resistance, coil, condenser, diode, and transistor, based on the experience knowledge of veteran expert. It is implemented in C computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. And, the validity of the builded expert system is proved by simulating for a typical electronic board model.

• 조명전기설비학회논문지
• /
• 제26권10호
• /
• pp.44-51
• /
• 2012

The purpose of this study is development of the diagnosis system to preventative maintenance in the on-board measuring systems for in-cab electric inspection systems of high speed railway. The on-board measuring systems can inspect precisely whether ground signal system operate stably. In this paper, we recognize characteristics of the track circuits and confirm whether the wave of current matches the on-board measuring data through the electric modeling method for high speed railway. it is necessary to develop GUI visual programs that can simulate abnormalities of the on-board measuring data in many ways, and the visual program is designed to diagnosis in the case of track circuit equipment's function decreased in advance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.545-545
• /
• 2007

Recently, innovative process has been investigated in order to replace the conventional high-cost micro patterning processes on the electronic products. To produce desirable profit margins from this low cost products, printed circuit board(PCB), will require dramatic changes in the current manufacturing philosophies and processes. Innovative process using metal nano particles replaces the current industry standard of subtractive etched of copper as a highly efficient way to produce robust circuitry on low cost substrates. An advantage of using metal nano particles process in patterned conductive line manufacturing is that the process is additive. Material is only deposited in desired locations, thereby reducing the amount of chemical and material waste. Simply, it just draws on the substrate as glass epoxy or polyimide with metal nano particles. Particles, when their size becomes nano-meter scale, show some specific characteristics such as enhanced reactivity of surface atoms, decrease in melting point, high electric conductivity compared with the bulk. Melting temperature of metal gets low, the metal nano particles could be formated onto polymer substrates and sintered under $300^{\circ}C$, which would be applied in PCB. It can be getting the metal line of excellent electric conductivity.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1146-1151
• /
• 2011

There are two methods for train control in information transmission by using track circuit system and installing wayside transmitter. Information signal is transmitted to the on-board antenna by using rails. Continuous information about train intervals, speed and route is received by on-board antenna in AF track circuit system. The information signal is included with carrier wave and received by magnetic coupling in the on-board antenna. Therefore, it is important to define standard current level in the AF track circuit system. When current flowed to rails is low, magnetic sensors are not operated by decreasing magnetic field intensity. Hence, SNR is decreased because electric field intensity is decreased. When the SNR is decreased, there is the serious influence of noise upon demodulation. So, the frequency of information signal is not extracted in frequency response. Thus, it is possible to happen to train accident and delay as the information signal is not analyzed in the on-board antenna. In this paper, standard energy density is calculated by using Parseval's theory in UM71c track circuit. Hence, detection time of information signal is presented.

• 한국전자통신학회논문지
• /
• 제9권1호
• /
• pp.91-96
• /
• 2014

최근 양산되고 있는 하이브리드 전기자동차에 비해서 연비를 좀 더 개선하기 위한 플러그인 하이브리드 전기자동차(Plug-in Hybrid Electric Vehicle)에 대한 연구가 활발히 진행되고 있다. 이 논문에서는 플러그인 하이브리드 전기자동차를 위한 고효율의 탑재형 충전기(on-board charger)에 대해서 연구한다. 탑재형 충전기는 2상 인터리브드 PFC 회로와 LLC 공진형 컨버터로 구성된다. LLC 공진형 컨버터의 새로운 설계절차를 본 논문에서 제안한다. 이는 매우 쉽고 강력한 방법이다. 위에서 언급한 내용을 확인하기 위해서 LLC 공진형 컨버터를 설계하고 PSIM 툴을 이용하여 테스트한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.10-14
• /
• 2008

In this paper, abnormal heating of circuit breaker in panel board by poor connection was studied. Firstly, calculation method of contact resistance shown in IEC 60943 was examined. Secondly, concerning abnormal heating of circuit breaker in panel board, field measurements were performed. Field measurements showed that locally abnormal heating by poor connection could be detected, therefore, in that case, immediate action was needed. Finally, experiments regarding abnormal heating between terminal of circuit breaker and electric wire were conducted. The results showed that abnormal heating above $180^{\circ}C$ was measured. Also, in the results of analysis of electrical waveforms according to load current, voltage drop occurred around poor connection, and the oxide was generated according to mechanical vibration. In order to prevent electrical disaster caused by poor connection, adequate torque should be applied to electrical connection, and periodic check-ups are needed.

• 한국화재소방학회논문지
• /
• 제31권3호
• /
• pp.63-72
• /
• 2017

본 논문에서는 저압용 10회로 분전반을 전기공업협동조합(KEMC) 2102-610 규정에 근거하여 제작하였다. 또한, 개발된 10회로 분전반의 특성 평가를 실시하여 안전성을 확보하고자 한다. 개발된 10회로 분전반은 내식성, 절연 재료의 특성, 자외선 복사의 내성, 기계적 충격 등에 적합하도록 설계되었다. 개발된 분전반은 외함의 보호 등급, 감전방지와 보호회로, 개폐 장치와 구성품, 내부 전기 회로와 연결부, 외부 도체의 단자, 절연 특성, 온도 상승 시험, 열저항 등이 적합하도록 제작하였다. 개발된 10회로 분전반은 단상 회로와 3상 회로 등으로 구분되어 있다. 분기된 각각의 차단기 부하측에 센서 모듈을 설치하여 부하의 전선로에서 발생되는 누설전류의 크기를 실시간 측정할 수 있다. 그리고 부하의 용도 및 목적 등에 따라 회로를 증설할 수 있고, 각각의 부하 상태 역시 실시간 부하 관리 및 점검이 가능하다. 개발된 10회로 분전반의 온도 상승 시험을 실시한 곳은 인입 접속부, 주회로 및 분기회로 모선, 모선지지물 등 18 개소이다. 온도가 가장 높게 측정된 곳은 분기회로 모선용 MCCB 전원측 접속부의 R-phase으로 $65.3^{\circ}C$, 부하측은 T-phase으로 $61.6^{\circ}C$로 기록되었다. 그리고 내열 실험 장치를 이용하여 MCCB를 $180^{\circ}C$에서 6시간 동안 열적 스트레스를 인가하였을 때 작동 손잡이의 변형이 확인되었고, 트립 상태로 이동한 것이 확인되었다.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.248-251
• /
• 2017

본 논문에서는 $360^{\circ}$ 전방위 화각을 가진 Dash Camera의 EMI 대응을 위한 보드 설계를 제안한다. 제안된 보드는 DM 및 CM 입력 노이즈 감소회로를 설계하고 능동 EMI 필터 결합회로를 적용하여 개발한다. DM 및 CM 입력 노이즈 감소회로 설계부분에서는 기생적 커패시턴스(CP)을 통해 입력 신호로 커플링된 DM 잡음을 얻기 위한 차동연산 증폭기 회로를 사용한다. 능동 EMI 필터 결합회로를 적용하여 설계하는 부분에서는 회로의 간략화를 위하여 EMI 소스의 노이즈를 분리하여 보상해 주기 위하여 노이즈 분리기를 설치하여 CM과 DM 능동필터를 동시에 보상한다. 제안된 EMI 대응을 위한 보드의 성능을 평가하기 위하여 공인 인정기관에서 실험한 결과, 각각의 주파수 대역에 따른 전자파 인증규격이 만족됨을 확인하였다.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.186-191
• /
• 2008

The conventional markets is badly damaged by a big fire because of no proper fire fighting management system. The cause of electricity fire is the aging and contact badness of electric equipment. The supervisory detecting system is needed to develop because the electric equipment is located to non visible and non exposing place. In this paper, we investigated the receiving and distributing board, the panel board and the fire prevention system of 17 domestic conventional markets. As a result of survey, capacity of distributing boards is mainly 600A and materials of distributing boards are synthetic resins 49%, metal 44%. ELB is mainly used as branch circuit breaker.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1126-1128
• /
• 1992

The object of this study is the design of 3 phase on-board inverter. The key point in the inverter design is the selection of switching device, and its performance effects that of total system. In this study, six-step square wave inverter was designed using IGBT ( Insulated Gate Bipolar Transistor ) which has the advantages of MOSFET and bipolar transistor as switching device. The condition of being small and light which is the one of requirements for on-board equipment was accomplished by using IGBT module and optimising the snubber circuit, and the reliablity was increased. It is confirmed that the designed inverter satisfies the required performance through the performance and environment test.