• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.65-72
• /
• 2024

This paper aims to advance our understanding of extensible beams with multiple cracks by presenting a crack energy and motion equation, and mathematically justifying the energy functions of axial and bending deformations caused by cracks. Utilizing an extended form of Hamilton's principle, we derive a normalized governing equation for the motion of the extensible beam, taking into account crack energy. To achieve a closed-form solution of the beam equation, we employ a simple approach that incorporates the crack's patching condition into the eigenvalue problem associated with the linear part of the governing equation. This methodology not only yields a valuable eigenmode function but also significantly enhances our understanding of the dynamics of cracked extensible beams. Furthermore, we derive a governing equation that is an ordinary differential equation concerning time, based on orthogonal eigenmodes. This research lays the foundation for further studies, including experimental validations, applications, and the study of damage estimation and detection in the presence of cracks.

• 한국음향학회지
• /
• 제32권6호
• /
• pp.548-555
• /
• 2013

음원 위치 추정은 여러 방면에서 쓰임이 있는 응용 기술이다. 음원의 위치를 추정하기 위한 기본 기법 중에는 시간 지연 추정 기법이 있다. 이 기법에선 음원의 위치를 추정하기 위해서 두 개 또는 그 이상의 수신기에 들어오는 신호간의 상대적 시간 지연을 알아내야 한다. 시간 지연 추정 기법에는 GCC (Generalized Cross-Correlation) 대표적이지만, 최소 고유치에 대응하는 고유 벡터를 이용하는 방법도 많이 쓰인다. 이 방법은 최소 고유치에 해당하는 고유벡터를 이용한다. 최소 고유치에 대응하는 고유 벡터를 이용하는 방법은 낮은 신호 대 잡음비 환경에서나 상관도가 있는 잡음환경에서, 최소 고유치에 해당하는 고유 벡터를 추정하는데 어려움이 있어서, 성능이 떨어진다. 본 논문에서는 정준형 상관 분석 (CCA)를 이용한 새 기법을 제안한다. 이 방법은 일반 고유치 분해 중에서 최대 고유치에 대응하는 고유벡터를 사용한다. 따라서 추정에 사용하는 고유벡터는 시간 지연 추정에 필요한 정보가 충분히 들어있다. 본 논문에서는 여러 서로 다른 신호 대 잡음비 환경 하에서 상관도가 없는 경우와 상관도가 있는 경우의 잡음 에 대해 비교 모의실험을 하였고, 이 비교 실험을 통하여 얻는 데이터를 통해서 제안한 CCA 기반 알고리즘이 기존 최소 고유치에 해당하는 고유벡터를 사용하는 시간 지연 추정법의 성능보다 더 우수하다는 것을 보인다.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.231-239
• /
• 2017

Fundamental period is one of the most critical parameters affecting the seismic design of buildings. In this paper, a very simple approach is presented for estimating the fundamental period of multiple-degree-of-freedom (MDOF) structures. The basic idea behind this approach is to replace the complicated MDOF system with an equivalent single-degree-of-freedom (SDOF) system. To realize this equivalence, a procedure for replacing a two-degree-of-freedom (2-DOF) system with an SDOF system, known as a two-to-single (TTS) procedure, is developed first; then, using the TTS procedure successively, an MDOF system is replaced with an equivalent SDOF system. The proposed approach is expressed in terms of mass, stiffness, and number of stories, without mode shape or any other parameters; thus, it is a very simple method. The accuracy of the proposed method is investigated by estimating the fundamental periods of many MDOF models; it is found that the results obtained by the proposed method agree very well with those obtained by eigenvalue analysis.

• Steel and Composite Structures
• /
• 제48권6호
• /
• pp.641-648
• /
• 2023

In this article, we explore the issue concerning semiconductors half-space comprised of materials with varying thermal conductivity. The problem is within the framework of the generalized thermoelastic model under one thermal relaxation time. The half-boundary space's plane is considered to be traction free and is subjected to a thermal shock. The material is supposed to have a temperature-dependent thermal conductivity. The numerical solutions to the problem are achieved using the finite element approach. To find the analytical solution to the linear problem, the eigenvalue approach is used with the Laplace transform. Neglecting the new parameter allows for comparisons between numerical findings and analytical solutions. This facilitates an examination of the physical quantities in the numerical solutions, ensuring the accuracy of the proposed approach.

• Structural Engineering and Mechanics
• /
• 제73권3호
• /
• pp.271-286
• /
• 2020

Passive control technologies are commonly used in several areas to suppress structural vibrations by the addition of supplementary damping, and some modal damping may be heavy beyond critical damping even for regular structures with energy dissipation devices. The design of passive control structures is typically based on (complex) mode superposition approaches. However, the conventional mode superposition approach is predominantly applied to cases of under-critical damping. Moreover, when any modal damping ratio is equal or close to 1.0, the system becomes defective, i.e., a complete set of eigenvectors cannot be obtained such that some well-known algorithms for the quadratic eigenvalue problem are invalid. In this paper, a generalized complex mode superposition method that is suitable for under-critical, critical and over-critical damping is proposed and expressed in a unified form for structural displacement, velocity and acceleration responses. In the new method, the conventional algorithm for the eigenvalue problem is still valid, even though the system becomes defective due to critical modal damping. Based on the modal truncation error analysis, modal corrected methods for displacement and acceleration responses are developed to approximately consider the contribution of the truncated higher modes. Finally, the implementation of the proposed methods is presented through two numerical examples, and the effectiveness is investigated. The results also show that over-critically damped modes have a significant impact on structural responses. This study is a development of the original complex mode superposition method and can be applied well to dynamic analyses of non-classically damped systems.

• 전기학회논문지
• /
• 제65권8호
• /
• pp.1400-1406
• /
• 2016

This paper presents a new adaptive converter control approach for electric motor systems whose voltage source is excited from photovoltaic (PV) power generators. First, an electric model is represented with dynamic states and output velocity of such DC motor systems. We propose a hybrid converter control law in which a state feedback control is applied as an auxiliary control framework. Moreover, control parameter estimation is derived to realize adaptive converter systems for effective control performance against stochastic PV power excitation in practice. We carry out stability analysis for such converter system by using a well-known eigenvalue theory. Lastly, numerical simulation is conducted to test reliability of the proposed converter control approach and prove its superiority in the control point of view.

• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.86-92
• /
• 2007

In this paper, we first establish $D_L$-admissibility and $D_R$-admissibility conditions for singular systems. The admissibility conditions expressed as Lyapunov type inequalities extend the existed results of normal systems to singular systems. As special cases the admissibility conditions of the continuous-time and the discrete-time singular systems can be obtained directly. The results established in this paper can be applied to solve the problems of eigenvalue assignment, regional pole-placement and robust control etc.

• 전자공학회논문지B
• /
• 제29B권7호
• /
• pp.70-78
• /
• 1992

In this paper, an approach for 3-D object segmentation and classification, which is based on eigen-values of polynomial function as their surface features, using neural network is proposed. The range images of 3-D objects are classified into surface primitives which are homogeneous in their intrinsic eigenvalue properties. The misclassified regions due to noise effect are merged into correct regions satisfying homogeneous constraints of Hopfield neural network. The proposed method has advantage of processing both segmentation and classification simultaneously.

• Nuclear Engineering and Technology
• /
• 제42권3호
• /
• pp.271-278
• /
• 2010

While the deterministic lattice physics/depletion codes use leakage-corrected critical spectrum (although approximate due to the B1 buckling search employed), Monte Carlo depletion codes currently in use do not have such a feature in spite of their heterogeneity and continuous-energy modeling capability. This paper describes an approach to Monte Carlo depletion with leakage-corrected critical spectrum derived from first principles. This is based on the concept of albedo eigenvalue treated as weight of the reflected neutron in Monte Carlo simulation.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 춘계학술대회 학술발표 논문집
• /
• pp.69-72
• /
• 2001

In this paper, we propose a new design method for bidirectional associative memories model with high error correction ratio. We extend the conventional GBAM model using bias terms and formulate a design procedure in the form of a constrained optimization problem. The constrained optimization problem is then transformed into a GEVP(generalized eigenvalue problem), which can be efficiently solved by recently developed interior point methods. The effectiveness of the proposed approach is illustrated by a example.