• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.125-134
• /
• 2016

We propose an efficient high voltage level shifter for a high side Buck converter driving a light-emitting diode (LED) lamp. The proposed circuit is comprised of a low voltage pulse width modulation (PWM) signal driver, a coupling capacitor, a resistor, and a diode. The proposed method uses a property of a PWM signal. The property is that the signal repeatedly transits between a low and high level at a certain frequency. A low voltage PWM signal is boosted to a high voltage PWM signal through a coupling capacitor using the property of the PWM signal, and the boosted high voltage PWM signal drives a p-channel metal oxide semiconductor (PMOS) transistor on the high side Buck converter. Experimental results show that the proposed level shifter boosts a low voltage (0 to 20 V) PWM signal at 125 kHz to a high voltage (370 to 380 V) PWM signal with a duty ratio of up to 0.9941.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.484-488
• /
• 2000

본 논문에서는 형광등용 인버터에서 발생하는 고조파를 억제할 수 있는 2단 평활랑 콘덴서를 이용한 고효율 고조파 저감회로를 제안한다. 형광등용 인버터에 직류전원으로서 사용되는 전파 전류의 파형은 전압 평활 콘덴서가 충전될 때 입력전압의 최대치 부근에서 펄스형태를 가지는 돌입전류의 발생으로 인해 많은 고조파들을 함유하게 된다. 따라서 이 고조파의 원인이 되는 돌입전류를 억제하기 위하여 본 논문에서는 전단 평활용 콘덴서의 충전전압을 이용하여 입력에서의 갑작스러운 충전전류를 억제하는 방법을 제안하였다. 그 결과 공급전류에서의 고조파의 발생을 억제하여 역율을 개선하게된다. 이에 대한 타당성을 시뮬레이션을 통하여 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1111-1114
• /
• 2003

In this paper, electrical characteristics of inductively coupled plasma in an electrodeless fluorescent lamp were investigated using a Langmuir probe with a variation of argon gas pressure. The RF output was applied in the range of $5{\sim}50W$ at 13.56MHz. The internal plasma voltage of the chamber and the probe current were measured while varying the supply voltage to the Langmuir probe in the range of $-100V{\sim}+100V$. When the pressure of argon gas was increased, electric current was decreased. There was a significant electric current increase from l0W to 30W. Also, when the RF power was increased, electron density was increase. This implies that this method can be used to find an optimal RF power for efficient light illumination in an electrodeless fluorescent lamp.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.560-566
• /
• 2004

In this paper, the electrical and emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma (ICP) with the variation of argon gas pressure and RF power. The RF output was applied to the antenna in the range of 5∼50 W at 13.56 MHz. The internal plasma voltage of the chamber and the probe current were measured while varying the supply voltage to the Langmuir probe in the range of －100V∼＋100V. When the pressure of argon gas was increased, electric current was decreased. There was a significant electric current increase from 10 to 30 W. Also, when the RF power was increased, electron density was increased. Also, the emission spectrum, Ar- I lins, luminance were investigated. At this time, the input parameter for ICP RF plasma, Ar gas pressure and RF power were applied in the range of 10∼60 mTorr, 10∼300 W, respectively. This implies that this method can be used to find an optimal RF power for efficient light illumination in an electrodeless fluorescent lamp.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.346-351
• /
• 2012

The fuel cost of fishing lights for squid jigging fishing vessels takes about 30% of total fishing costs and over 65% of total fuel costs, which indicates the necessity of development of cost-reducing and high efficient fishing light system. This study aimed to analyze the economic effectiveness of LED fishing light systems in combination with metal halide lamp for the squid jigging fishery. Analytical results showed that the level of fishing profits of vessels using LED lights could be different with those of vessels using metal halide lights. That is, when a fuel cost could be reduced by 30%, fishing profits of vessels using LED lights might be the same as those of vessels using metal halide lights, and fishing profits of vessels using LED lights could be higher than those of vessels using metal halide lights when a fuel cost could be reduced by 50%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1719-1721
• /
• 2003

In this paper, electrical characteristics of inductively coupled plasma in an electrodeless fluorescent lamp were investigated using a Langmuir probe with a variation of Ar gas pressure. The RF output was applied in the range of 5-50W at 13.56MHz. The internal plasma voltage of the chamber and the probe current were measured while varying the supply voltage to the Langmuir probe in the range of -100V ${\sim}$ +100V. When the pressure of Ar gas was increased, electric current was decreased. There was a significant electric current increase when the applied RF power was increased from 10 W to 30 W. This implies that this method can be used to find an optimal RF power for efficient light illumination in an electrodeless fluorescent lamp.

• 센서학회지
• /
• 제14권5호
• /
• pp.337-342
• /
• 2005

A silicon-based micro-reactor to amplify small amount of deoxyribonucleic acid (DNA) has been fabricated using micro-electro-mechanical systems (MEMS) technology. Polymerase chain reaction (PCR) of DNA requires a precise and rapid temperature control. A Pt sensor is integrated directly in the chamber for real-time temperature measurement and an infrared lamp is used as external heating source for non-contact and rapid heating. In addition to the real-time temperature sensing, PCR needs a rapid thermocycling for effective PCR. For a fast thermal response, the thermal mass of the reactor chamber is minimized by removal of bulk silicon volume around the reactor using double-side KOH etching. The transparent optical property of silicon in the infrared wavelength range provides an efficient absorption of thermal energy into the reacting sample without being absorbed by silicon reactor chamber. It is confirmed that the fabricated micro-reactor could be heated up in less than 30 sec to the denaturation temperature by the external infrared lamp and cooled down in 30 sec to the annealing temperature by passive cooling.

• 한국광물학회지
• /
• 제27권4호
• /
• pp.223-233
• /
• 2014

광산에서 순도 높은 금은을 추출하기 위해 청화법을 이용해 왔다. 이러한 광산 활동에서 많은 양의 시안이 사용되어 왔으며 이에 따라 고농도의 시안을 함유한 광산폐수가 발생되어 광산 주변 지역의 수계를 오염시킬 수 있다. 본 연구에서는 이러한 시안함유 광산폐수 및 침출수로부터 시안을 제거하기 위하여 $TiO_2$ 광촉매와 UV-LED 광원을 이용한 광산화 공정에 대하여 연구하였다. 기존 광산화 공정에서는 주로 UV 램프가 광원으로 많이 사용되었지만 여러 가지 단점으로 인하여 본 연구에서는 그 대체 광원으로 UV-LED의 적용 가능성을 평가하였다. 세 종류의 $TiO_2$의 광산화 효율을 평가한 결과, 아나타제와 루틸이 혼합된 Degussa P25가 광산화 효율이 가장 좋은 것으로 확인되었다. 또한 형태와 파장이 다른 네 종류의 UV-LED를 비교 평가한 결과, 365 nm 램프형 > 365 nm 캔형 > 280 nm 캔형 > 420 nm 램프형 순으로 제거효율이 좋은 것으로 나타났다. 본 연구는 UV-LED는 기존의 UV 램프의 단점을 극복할 수 있는 대체광원으로서 광산화 공정에 적용 가능하다는 것을 입증하였으며, 시안의 광산화 효율은 $TiO_2$ 광촉매의 종류에도 영향을 받는다는 것을 확인하였다.

• Journal of Power Electronics
• /
• 제4권3호
• /
• pp.188-196
• /
• 2004

The dielectric barrier discharge is recognized as one of the efficient methods of ultraviolet light generation and ozone production. As well, it is widely utilized for gaseous wastes neutralization and other technological processes in industry. This electrochemical reaction is electrically equivalent to a nonlinear capacitive load that represents some difficulties for designing the power supply. Therefore, a conventional power supply is designed for a drastically simplified model of the load and generally is not optimal. This paper presents a fast simulation approach for the nonlinear capacitive model representation of the dielectric barrier discharge load lamp. The main idea of the proposed method is to use analytical solutions of the differential state equations for the load and find the unknown initial conditions for the steady state by an optimization method. The derived expressions for the analytical solutions are rather complicated, however they greatly reduce the calculation time, which make sense when a deeper analysis is performed. This paper introduces the proposed simulation method and gives some examples of its application such as estimation of the load equivalent parameters and load matching conditions.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.9-14
• /
• 2005

본 연구에서는 단독주택 공부방을 대상으로 조명환경 실태조사를 실시하였다. 그 결과, 공부방은 주로 형광등을 사용하였으며 배광방식은 직접조명 방식을 사용하고 있었다. 또한 국부조명을 사용하는 비율은 48.2[%]로 시작업이 효과적이지 못하였다. 내부공간 조도는 평균 131.41[lx]이며, 책상면 조도는 322.57[lx]로 최저허용조도의 54[%]에 해당하는 열악한 실정이었다. 또한 사용자의 조명환경에 비해 만족도는 높아 조명에 대한 인식이 매우 부족한 것으로 사료된다.