• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.167-176
• /
• 1995

Autumn visitors to Chuwangsan National Park was more than summer's. About 89% of total visitors used main trail but approximately 35% visited to the Third Falls. The entire width, bare width, maximum depth and slope of trail as the trail condition surveyed at the total of 103 points were significantly greater on the more heavily-used trail. Trail conditons of rock-exposed, root-exposed, deepening points as the deterioration types of trail were significantly different from those of non-deteriorated points. According to the topographic position of trail, severe difference of dominant trees in the edge vegetation was found and Lespedeza maximowiczii, Rhododendron yedoense and Fraxinus sieboldana were dominant in shrub layer of trail edge vegetation. The crown coverage, number of species and individuals of shrub layer in edge vegetation were generally higher than those in the other national parks with more heavily-used trail.

• Journal of the Korean Society of Safety
• /
• v.39 no.3
• /
• pp.1-6
• /
• 2024

Polyester round slings are widely utilized in various work environments due to their lightweight, flexible nature and smooth surface that minimizes the risk of cargo abrasion or damage. However, specific guidelines intended to protect round slings from the damage caused by the sharp edges of cargo, thus preventing accidents in case the cargo falls, are lacking in South Korea. In this study, a comparative analysis was conducted on the regulations and guidelines related to round slings in South Korea and the United States. Further, experiments were carried out to determine the relationship between round slings and lifting accessories. The research identified specific shortcomings in the user manuals provided by round-sling manufacturers. Accordingly, certain measures were proposed for enhancing the operational safety of round slings: 1) establish criteria for edge protection of polyester round slings and 2) recommend standardization of the information provided by manufacturers. As developing new standards is a time-consuming task, this study proposes a method for enhancing the operational safety of round slings in the short term by introducing established safety standards from the United States-where safety has been proven over a considerable period of time-into the domestic context. In addition, it is recommended that edge criteria be permanently printed on the labels of round slings.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.35-47
• /
• 2010

To complement inaccurate edge information and detect correctly the boundary of a vehicle in an image, an extended edge analysis technique is presented in this paper. The vehicle is detected using the bottom boundary generated by a vehicle and the road surface and the left and right side boundaries of the vehicle. The proposed extended edge analysis method extracts the horizontal edge by merging or dividing the nearby edges inside the region of interest set beforehand because various noises deteriorates the horizontal edge which can be a bottom boundary. The horizontal edge is considered as the bottom boundary and the vertical edges as the side boundaries of a vehicle if the extracted horizontal edge intersects with two vertical edges which satisfy the vehicle width condition at the height of the horizontal edge. This proposed algorithm is more efficient than the other existing methods when the road surface is complex. It is proved by the experiments executed on the roads having various backgrounds.

• Structural Engineering and Mechanics
• /
• v.57 no.4
• /
• pp.733-762
• /
• 2016

Based on a reduced displacement field, a layer-wise (LW) formulation is developed for analysis of thick shell panels which is subjected to axial tension. Employing the principle of minimum total potential energy, the local governing equations of thick panel which is subjected to axial extension are obtained. An analytical method is developed for solution of the governing equations for various edge conditions. The governing equations are solved for free and simply supported edge conditions. The interlaminar stresses in the panel are investigated by means of Hooke's law and also by means of integration of the equilibrium equations of elasticity. Dependency of the result upon the number of numerical layers in the layerwise theory (LWT) is studied. The accuracy of the numerical results is validated by comparison with the results of the finite element method and with other available results in the open literature and good agreement is seen between the results. Numerical results are then presented for the distribution of interlaminar normal and shear stresses within the symmetric and un-symmetric cross-ply thick panels with free and simply supported boundaries. The effects of the geometrical parameters such as radius to thickness and width to thickness ratio are investigated on the distribution of the interlaminar stresses in thick panels.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.48-52
• /
• 1998

We fabricated the newly proposed nano structure memory with SOI edge channel and a nano dot. The width of the edge channel of this device, which uses the side wall as a channel and has a nano dot on this channel region, was determined by the thickness of the recessed top-silicon layer of SOI wafer. The size of side-wall nano dot was determined by the RIE etch and E-Beam lithography. The I$_{d}$-V$_{d}$, I$_{d}$-V$_{g}$ characteristics of the devices without nano dots and memory characteristics of the devices with nano dots were obtained, where the voltage scan was done between -20 V and 14 V and the threshold voltage shift was about 1 V.t 1 V.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.173-178
• /
• 2002

Flat plate is susceptible to punching shear failure at the slab-column connection, which may cause catastrophic structural collapse. To prevent such brittle failure, strength and ductility of the connection should be ensured. However, since it is very difficult to experimentally simulate the actual load and boundary conditions of the flat plate system, it is not easy to obtain reliable information and data regarding to the strength and ductility of the flat plate-column edge connection. In the present study, numerical studies were performed for edge connections of continuous flat plate. The results were compared with the existing experiments, and the variations of bending moment, drift, effective width around the connection were investigated. Based on tile findings of the numerical studies, the disadvantages of current design methods were discussed.

• Smart Media Journal
• /
• v.6 no.4
• /
• pp.32-40
• /
• 2017

In this paper, a robust text detection method based on edge enhanced contrasting extremal region (CER) is proposed using stroke width transform (SWT) and tensor voting. First, the edge enhanced CER extracts a number of covariant regions, which is a stable connected component from input images. Next, SWT is created by the distance map, which is used to eliminate non-text regions. Then, these candidate text regions are verified based on tensor voting, which uses the input center point in the previous step to compute curve salience values. Finally, the connected component grouping is applied to a cluster closed to characters. The proposed method is evaluated with the ICDAR2003 and ICDAR2013 text detection competition datasets and the experiment results show high accuracy compared to previous methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.512-517
• /
• 1993

The cold rolled strip meets continuously rising demands on the less deviation of thickness at the width direction of their rolled products. Especially, the special interest has been to find the methods to reduce the edge drop which influences seriously on the yield losses and the quality of the rolled products. In this study, the influence of hot coils on the thickness profile of cold rolled strip was analyzed. For obtainint the tapered work roll shig\ft conditions, the thermal crown and the flattening between the work roll and the strip were calculated, and the main parameters which have mostly effects on the edge drop were simulated. Also the obtained conditions from the simulation were applied to Tandem Cold Rolling Mill to investigate the change of the edge drop and the crown ratio depending on the amount of work roll taper and the length of contact of taper. The results of the application led to better thickness profile than conventional one.

• Tribology and Lubricants
• /
• v.10 no.4
• /
• pp.82-88
• /
• 1994

This paper deals with a FEM computation as well as measurement of the contact force and distribution of the temperature in rubber lip seals when the sealing interference between the rotating shaft and the lip edge is present. The study of the contact forces and distributions of the temperature and the sealing contact stress has always been one of the basic steps in the process of designing a lip seal. The calculated FEM results indicate that as the sealing interference increases, the contact force moderately increases compared with decreased sealing interference at the seal lip edge and radically increases the contacting width. And the FEM computation of oontact forces including nonlinear problems has been compared with experimental measurements with good agreement. The frictional heat does not dissipate promptly in the rubber seal lip and tends to accumulate at the contacting lip edge especially.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.212-216
• /
• 2007

Predicting microcracking properties of the composite laminates in nonuniform stress conditions was the subject in this paper. The uniform stress field meant the stresses were independent of the width direction. The material was the 954-2A/IM7 laminates containing a central hole. Microcracks initiated at the edge of the hole and propagated into the laminate. Because the tensile stress concentration decreased with distance, the microcracks were arrested before the edge of the laminate. Because carbon fiber composites were opaque, a x-ray method was used to detect the length of the propagating microcracks. The microcracking at the near edge of the hole could be reasonably predicted by considering the local laminate stresses and the microcracking toughness measured in unnotched laminates. However, the date away from the hole did not agree with the predictions. The local microcrack density was always much higher than that predicted by the local laminate stress.