• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.704-710
• /
• 2012

The lower portion of sloping paddy fields normally contains excessive moisture and the higher water table caused by the inflow of ground water from the upper part of the field resulting in non-uniform water content distribution. Four drainage methods namely Open Ditch, Vinyl Barrier, Pipe Drainage and Tube Bundle for multiple land use were installed within 1-m position from the lower edge of the upper embankment of sloping alluvial paddy fields. This study was conducted to evaluate soil physical characteristics by drainage improvement in poorly drained sloping paddy field. The results showed that subsurface drainage by Pipe Drainage improves the productivity of poorly drained soils by lowering the water table and improving root zone soil layer condition. In an Pipe drainage plot, soil moisture drained faster as compared to the other drainage methods. Infiltration rate showed high tendency to Piper Drainage method about $20.87mm\;hr^{-1}$ than in Open Ditch method $0.15mm\;hr^{-1}$. And Similarly soil water and degree of hardness and shear strength phase of soil profile showed a tendency to decrease. From the above results, we found that when an subsurface drainage was established with at 1m position from the lower edge paddy levee of the upper field in sloping poorly drained paddy fields Pipe Drainage was the most effective drainage system for multiple land use.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.73-82
• /
• 2011

X-ray absorption spectroscopy (XAS) study was conducted using arsenite-sorbed two-line ferrihydrite to investigate the mechanism of surface interactions between two-line ferrihydrite and As(III) (arsenite) which are ubiquitous in nature. The two-line ferrihydrite used was synthesized in the laboratory and the study was undertaken at pHs 4 and 10 to compare the difference in mechanisms of surface interaction between acidic and alkaline environments. The effect of arsenite-adsorbed concentrations on surface complexation was investigated at each pH condition as well. From the results of XAS analyses, the structural parameters of arsenite in the EXAFS revealed that the coordination number and distanceof As-O were 3.1~3.3 and 1.74~1.79 ${\AA}$, respectively, which indicate that the unit structure of arsenite complex formed on the surface of two-line ferrihydrite is $AsO_3$. The dominant structures of As(III)-Fe complex were examined to be bidentate binuclear comer-sharing ($^2C$) and the mixture of bidentate mononuclear edge sharing ($^2E$) and $^2C$ appeared as well. At pH 4, arsenite complex showed different structures on the surface of two-line ferrihydrite, depending on the adsorbed concentrations. At pH 10, on the contrary, the surface structures of arsenite complexes were interpreted to be almost identical, irrespective of the adsorbed concentrations of arsenite. Consequently, this microscopic XAS results support the results of macroscopic adsorption experiments in which the surface interaction between arsenite and two-line ferrihydrite is significantly influenced by pH conditions as well as arsenite concentrations.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.507-520
• /
• 2007

Satellite passive microwave(PM) sensors have been observing polar sea ice concentration(SIC), ice temperature, and snow depth since 1970s. Among them SIC is playing an important role in the various studies as it is considered the first factor for the monitoring of global climate and environment changes. Verification and correction of PM SIC is essential for this purpose. In this study, we calculated SIC from KOMPSAT-1 EOC images obtained from Arctic sea ice edges from July to August 2005 and compared with SSM/I SIC calculated from NASA Team(NT) algorithm. When we have no consideration of sea ice types, EOC and SSM/I NT SIC showed low correlation coefficient of 0.574. This is because there are differences in spatial resolution and observing time between two sensors, and the temporal and spatial variation of sea ice was high in summer Arctic ice edge. For the verification of SSM/I NT SIC according to sea ice types, we divided sea ice into land-fast ice, pack ice, and drift ice from EOC images, and compared them with SSM/I NT SIC corresponding to each ice type. The concentration of land-fast ice between EOC and SSM/I SIC were calculated very similarly to each other with the mean difference of 0.38%. This is because the temporal and spatial variation of land-fast ice is small, and the snow condition on the ice surface is relatively dry. In case of pack ice, there were lots of ice ridge and new ice that are known to be underestimated by NT algorithm. SSM/I NT SIC were lower than EOC SIC by 19.63% in average. In drift ice, SSM/I NT SIC showed 20.17% higher than EOC SIC in average. The sea ice with high concentration could be included inside the wide IFOV of SSM/I because the drift ice was located near the edge of pack ice. It is also suggested that SSM/I NT SIC overestimated the drift ice covered by wet snow.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.300-305
• /
• 2012

In this paper, a miniaturized bow-tie monopole UWB antenna with band rejection characteristic is proposed. To miniaturize the proposed antenna, a perfect magnetic wall(PMW) condition is applied to primitive bow-tie monopole antenna. An uneven ground patch, a tapered feeding structure and a edge-chopped main patch are adapted for impedance matching. A quater-lambda slot resonator is inserted at main patch to prevent interference in UWB band from another band. The proposed antenna is fabricated on Taconic RF60-A substrate with relative permittivity of 6.15. The size of the proposed antenna is $30.0{\times}39.7mm^2$, which is only 45 % of the conventional bow-tie monopole antenna. The proposed antenna covers full UWB band with return losses less than -10 dB and has band stop characteristic in 5 GHz WLAN band. The maximum gains are within -1.0~5.0 dBi, the group delay variations are within 1.0 ns and the radiation patterns show directivity characteristics in x-y plane.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.161-167
• /
• 1988

Studies were carried out to examine the effects of simulated acid rain on the various crops of rice, peper, tomato, pumpkin, egg plant, potato, soybean, radish, cucumber, common pea, sweet potato, corn, lettuce, chinse cabbage, spinach, under the condition of the rains of pH 3.0. The rain was adjusted to pH 4.0, 3.0, 2.0 with sulfuric acid, and soybeans were exposed with the various pH levels, eighteen times every other days. The symptoms of damage, ratios of destroyed leaf and sulphur content by leaves were investigated. The results obtained were as follows. 1. The exposure to the rain resulted in the reddish brown or white pigment spots in the leaves surface and the colour was developed red and darker along the edge of spots. 2. Most crops were affected with acid rain of pH 3.0 at which the amount of chlorophyl was decreased. 3. The spinach, chinese cabbage, lettuce were sensitive to the acid rain, however, the peper, tomato pumpkin were resistance to it. 4. The content of chlorophyl was decreased with increasing leave injury. 5. The sulphur content in leave was increased with increasing acidity of the rain, however the yield was decreased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.27-34
• /
• 2010

In a test duct with closed configuration, particle removal performance of an edge-plate type electrostatic precipitator (ESP) was evaluated at a high flow rate in $CO_2$ rich environments by changing gap distances between collection plates, concentrations of $CO_2$, particle sizes, types of electrodes, and types of power supplies. At the same experimental conditions, collection efficiency of particles with the mean particle size, 300 nm, decreased as the gap distance and $CO_2$ concentration increased because of low electrostatic force and low discharged current. In addition, as the particle size increased, the efficiency increased because of high charging rate of the large particles. With the electrode type which has higher surface area of a discharging plate and with the power supply which applied 25 kHz-pulsed DC voltages, the removal efficiency was high even in rich $CO_2$ condition due to high electrostatic force at the same power consumption.

• Journal of Environmental Impact Assessment
• /
• v.23 no.6
• /
• pp.417-431
• /
• 2014

There is a Conjoint Analysis to estimate the environmental value of natural river restoration project of Inchon Metropolitan City's small River: Gong-chon Stream, Gul-po Stream, Seung-gi Stream, Jang-su Stream. In order to find out the optimal expense condition, we tried to estimate the possible payable amount. According to the analysis, almost all people are willing to pay 15,000 Won. In case of the river types, the people liked 10 cm's depth of water and there should be brook trail, convenient facilities and flood plain at the stream edge space. But it is impossible to build these facilities with minimum fare 15,000 Won per a household. If the necessary expenses set high, the tax resistance of the local residents will be increased. So, in consideration of the analytical results of the attribute level, we draw five alternatives. This study is based on the results of Incheon metropolitan City residents' survey, and there is Conjoint Analysis to estimate the environmental value of natural-type river project of Incheon metropolitan City. If it is reflected the special assume factors of this study, and if there is exact environmental value estimation of the various river quality through different analysis, then it will become a study of high utilizing.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.708-714
• /
• 2002

A new leaf blight was found on the perilla leaves at the major perilla-cultivating areas such as Kangdong in Busan and Miryang in Kyungnam province. Symptoms of the disease initially appeared on the edge of perilla leaves showing black necrosis and drying, and the infected leaves were finally fell down. The SD1 isolate showing strong pathogenicity and forming abundant conidial spores on the diseased lesions was isolated. Among the tested media, mycelial growth was abundant on PDA (Potato Dextrose Agar) medium at $25^{\circ}C$ under dark condition, but conidial formation was greater on V8A (V-8 juice A8ar) medium than that on PDA medium. Optimal temperatures for mycelial growth and conidial formation on PDA medium were respectively $25^{\circ}C$ and 3$0^{\circ}C$. The rate of conidial germination and the elongation of germ tube were more effective in 10% tomato juice than those in PDB (Potato Dextrose Broth) and sterile water. In 10% tomato juice, the rate of conidial germination and the length of germ tube were 100% after incubation for 24k and 535.2${\mu}{\textrm}{m}$ after incubation for 36hr, respectively. According to the result of pathogenicity, it revealed that conidial suspention with 10% tomato juice was the most effective for pathogenicity test showing as 100% of disease incidence, and the symptoms caused by artificial inoculum were same as those of naturally infected perilla. In this study, the SD1 isolate according to the results of morphological characteristics, the incubation characteristics and pathogenicity was firstly identified A. alternata, and named as leaf blight of perilla.

• Journal of Science of Art and Design
• /
• v.11
• /
• pp.79-108
• /
• 2007

"Printing is an Art of reproduction & a Technique of However printing has extended its limitation from a genre of reproduction itself and now it stands on the turning point as an art such as painting or sculpture which expresses artist's originality. Early Printing has had relations in depth with press printing in terms of information recording, preservation, and transmission. It was acknowledged value in a way of information satisfaction different from how it is valued as a pure art today. But, later printing has transferred its function from a mean of reproduction to pure art due to the development of printing skills and photography invention. It can be said that the concept of modern printing is taking over its genealogy as a creative work not as just printing. Also its expression capability is widen to dimensional printing and high-tech multimedia from original tradition techniques. As we discussed above, modern painting is very open to various changes. This modern painting aspect can be seen as an extended interpretation of 'board' concept. This dissertation raises a question why monotype and monoprint couldn't secure its position in printing history in spite of numerous artists' tryouts in its way. Monotype and monoprint fundamentally based on intaglio technique in its history. Yet, its systematic study hasn't been worked out. This is because of the lack of recognition of monotype and monoprint's originality as printing. Especially in monoprint, it has known as an early stage in copperplate printing process which is an attempt to solve the technique limitation or trial work for edition. Likewise the reason why monotype and monoprint remains at the edge of printing border ambiguously is because of conceptual, technical characteristics which are against traditional printing. In traditional printing, the concept of board is important as a method of reproduction. Different from the fact, monotype and monoprint accept the form of medium 'board' conceptually out of limited condition as mentioned. Thus monotype and monoprint hasn't stand out for several reasons until late 20th century when it started come out to public as people starts to have interests that works from famous artists are actually based on monotype and monoprint. This dissertation likes to step into the monotype and monoprint theoretically which is not well known in domestic and try to study the meaning of monotype and monoprint as a printing medium which is also hasn't been considered sincerely. For this study the process follow as below. First, look into how monotype and monoprint has a concept and history. Next, check differences through comparison with traditional printing and how printing can be understood in what aspects at the same time. After, verify how monotype and monoprint have influence on the acceptance of extended concept of 'board'. This study will show the expressional possibility of monotype and monoprint which has already known as 'tableau printing' in today's situation where adventurous experiments of printing medium are going on with the development of technology.

• Journal of Welding and Joining
• /
• v.33 no.5
• /
• pp.26-30
• /
• 2015

Hastelloy X in this study was applied in jet engine F-15 air fighter as shroud to isolate the engine from outer skin. After 15 years operation at elevated temperature the mechanical properties decreased gradually due to the precipitation of continues second phases in the grain boundaries and precipitated inside the grain. The crack happened at the edge of the shroud due to the thermal and mechanical stress from jet engine. Selective TEM analysis found that the grain boundaries consist of $M_{23}C_6$ carbide, $M_6$ Ccarbide and small percentage of sigma(${\sigma}$) phase. Furthermore, it was confirmed the nano size of ${\sigma}$ and miu (${\mu}$) phase inside the grain. In this study, it was investigated the microstructure of the degraded shroud component and HAZ of repair welded shroud. In the HAZ, it was observed the dissolution of the $M_{23}C_6$ carbides and smaller precipitates, the migration of the undissolved larger $M_{23}C_6$ carbide and $M_6$ Ccarbide. It is also observed the liquation due to the simply melt of the segregated precipitates in the grain boundaries. Interestingly, the segregated second phases which simply melt in the grain boundaries more easily happened at higher heat input welding condition. High temperature tensile test was done at $300^{\circ}C$, $700^{\circ}C$ and $900^{\circ}C$. It was obtained that the toughness of welded sample is lower compare to the non-welded sample. The solution heat treatment at $1170^{\circ}C$ for 5 minutes was suggested to obtain a better mechanical properties of the shroud. The high cycle fatigue number of the repair welded shroud shows a much lower compare to the shroud. In addition, the high cycle fatigue number at room temperature after solution heat treatment was almost double compare to the before solution heat treatment under 420-500MPa stress amplitude. However, the high cycle fatigue number of repaired welded sample was shown a much lower compare to the non- welded shroud and solution treated shroud. One of the main reasons to decrease the tensile strength and the high cycle fatigue properties of the repair welded shroud is the formation of the liquid phase in HAZ.