• 상하수도학회지
• /
• 제33권6호
• /
• pp.469-480
• /
• 2019

This study was conducted to evaluate the degradation and mineralization of PPCPs (Pharmaceuticals and Personal Care Products) using a CBD(Collimated Beam Device) of UV/H₂O₂ advanced oxidation process. The decomposition rate of each substance was regarded as the first reaction rate to the ultraviolet irradiation dose. The decomposition rate constants for PPCPs were determined by the concentration of hydrogen peroxide and ultraviolet irradiation intensity. If the decomposition rate constant is large, the PPCPs concentration decreases rapidly. According to the decomposition rate constant, chlortetracycline and sulfamethoxazole are expected to be sufficiently removed by UV irradiation only without the addition of hydrogen peroxide. In the case of carbamazepine, however, very high UV dose was required in the absence of hydrogen peroxide. Other PPCPs required an appropriate concentration of hydrogen peroxide and ultraviolet irradiation intensity. The UV dose required to remove 90% of each PPCPs using the degradation rate constant can be calculated according to the concentration of hydrogen peroxide in each sample. Using this reaction rate, the optimum UV dose and hydrogen peroxide concentration for achieving the target removal rate can be obtained by the target PPCPs and water properties. It can be a necessary data to establish design and operating conditions such as UV lamp type, quantity and hydrogen peroxide concentration depending on the residence time for the most economical operation.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.41-51
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• 한국응급구조학회지
• /
• 제11권2호
• /
• pp.87-101
• /
• 2007

Health and disease related characteristics of 226 selected by systematic sampling from 452 personal emergency response system(PERS) beneficiaries and actual conditions of using PERS by them are as follows. Over 86% of PERS beneficiaries have not good health conditions and 70.7% of them have chronic diseases. On social supports family was highest as 52.2% and cases having social workers' assistance were 15.2%, but 53 as 23.7% had not visit or call from anyone and showed very low social supports. 86.2% was given PERS within 3years and 79.1% had it by the recommendation from related agencies and 4.0% was by their demand. On wearing it, 78.3% didn't bring it with them and 92% of them answered they were not sick and then it was found that they didn't use it because they had not special emergency. On satisfaction with paging system's operation, 81.3% answered they were satisfied with it, 48.8% used it for 'acute and emergency diseases' and 29.3% called ambulance for 'appointed medical treatment'. Time required for ambulance to arrive at the field was within 10 min. in 87.8% and after 10 min. in 12.2% and emergency service for beneficiaries by fire service was very good. On satisfaction with use of PERS, 85.4% were satisfied with it, 81.9% who requested repair or replacement of radio paging got it back after one or two days of their request and they answered they were satisfied with A/S. 45.5% answered they powered off it because 'they didn't use it' and 12.1% had 'economical reason of phone charge'.

• 한국항해학회지
• /
• 제10권2호
• /
• pp.97-114
• /
• 1986

Ship's maneuverability is very important factor in safe ship handling and economical ship operation. Steering characteristics are consisted of course stability and maneuverability. Today in many advanced ship-building countries, they study ship's course stability, using model ship tests, such as straight line tests, rotating arm tests and Planar Motion Mechanism (PMM) etc., in tow in tanks. It is the purpose of this paper to provide ship's handlers with better understanding of steering characteristics and to help them in safe controlling and manevering . In this paper, the author simulated response of various vessels, running straight course with constant speed, and they are disturbed by small external disturbance of one degree yaw angle with no angular velocity . The author used the hydrodynamic derivtives resulted at tests of Davidson's laboratory in Stevens Institute of Technology, New Jersey, U.S.A. Course stability was evaluated and analyzed in various respects, such as block coefficient, ratio of ship's length to beam, draft and rudder area ratio etc. The obtained results are as follows : (1) The ship's course stability is affected by magnitude of block coefficient greatly. In case that the block coefficient is more than 0.7, the deviation varies at nearly same rate but the requistite time to reach the steady course is different. (2) The ship's course stability is affected by magnitude of L/B. When the dimensionless time reaches about 3, the deviation and requisite time to reach the steady course are influenced nearly same. After the dimensionless time is about 3, they change on invariable ratio. (3) The effect to course stability by L/T and RA' can be neglected. (4) The reason why thy VLCC and container feeder vessel are unstable on their course is that their block coefficient is generally more than 0.8 and the ratio of ship's length to beam is about 6.0.

• Korean Chemical Engineering Research
• /
• 제51권5호
• /
• pp.556-560
• /
• 2013

최근에 저가의 고분자전해질 연료전지(Proton Exchange Membrane Fuel Cells, PEMFC)용 비불소계 전해질 막 연구개발이 활발히 진행되고 있다. 본 연구에서는 PEMFC 운전 조건에서 Poly(arylene ether sulfone)(PAES) 막과 불소계막의 특성을 비교하였다. I-V 분극곡선, 수소투과도, 전기화학적 표면적, 막저항 및 부하 전달 저항 등을 측정 분석했다. PAES 막은 상대습도 100%에서는 불소계 막과 비슷한 성능을 보였으나 낮은 상대습도에서 이온전도도가 낮아 성능감소가 컸다.

• 한국통신학회논문지
• /
• 제39C권9호
• /
• pp.774-781
• /
• 2014

이동통신의 발달에 따라 주파수 자원에 대한 요구가 증가할 뿐만 아니라, 그들의 경제적 가치도 올라가고 있다. 주파수 자원 활용에 따른 경제적 효용성을 높이기 위하여 많은 국가에서 전통적으로 그 가치에 비해 저렴하게 공급되고 있는 공공용, 방송용 등의 주파수 관리에 관심을 가지고 있다. 본 연구에서는 어업정보통신용으로 활용하고 있는 주파수의 가치 평가에 대하여 논하였다. 방법으로는 전국을 서비스 영역으로 커버하는 이동통신시스템의 시설비용을 합산하여 도출한 대체 비용과 2011년 LTE 서비스용 주파수의 경매 가격에 어업통신용 주파수의 특성을 고려한 비용의 평균값으로 주파수 가치를 산정하였다.

• Membrane and Water Treatment
• /
• 제6권1호
• /
• pp.77-94
• /
• 2015

Ultrafiltration membranes have several advantages over conventional drinking-water treatment. However, this technology presents major limitations, such as irreversible fouling and low removal of natural organic matter. Fouling depends heavily on the raw-water quality as well as on the operating conditions of the process, including flux, permeate recovery, pre-treatment, chemical cleaning, and backwashing. Starting with the premise that the optimisation of operating variables can improve membrane performance, different experiments were conducted in a pilot plant located in Granada (Spain). Several combinations of permeate and backwashing flow rates, backwashing frequencies, and aeration flow rates were tested for low-quality water coming from Genil River with the following results: the effluent quality did not depend on the combination of operating conditions chosen; and the membrane was effective for the removal of microorganisms, turbidity and suspended solids but the yields for the removal of dissolved organic carbon were extremely low. In addition, the threshold transmembrane pressure (-0.7 bar) was reached within a few hours and it was difficult to recover due to the low efficiency of the chemical cleanings. Moreover, greater transmembrane pressure due to fouling also increased the energy consumption, and it was not possible to lower it without compromising the permeate recovery. Finally, the intensification of aeration contributed positively to lengthening the operation times but again raised energy consumption. In light of these findings, the feasibility of ultrafiltration as a single treatment is questioned for low-quality influents.

• 선박안전
• /
• 통권22호
• /
• pp.34-53
• /
• 2007

In the case of hull material. large sized merchant ships are made of steel, on the other hand FRP or wood are used for small sized fishing boats. At present in Korea approximately 88,500 fishing boats are in operation of which 70% are made of FRP In the meantime, stainless steel is frequently used as shaft materials of the small-size FRP fishing boat. Namely, the kinds of shaft materials are STS 304(18Cr-8Ni), STS 316(18Cr-12Ni-2.5Mo steel) and STS 630(17Cr-Ni-Nb steel)etc. Among these things, STS 304 which is the cheapest and having ordinary corrosion resistance is most widely used as 2nd class shaft material. But, using STS 304 for shaft system material of the small-size FRP fishing boat on seawater environments entails a severe corrosion which causes shaft system troubles. Particularly, the corrosions tend to be concentrated of the stern and bow side, propeller shaft surface of inside of stern tube and the boat having no stern cooling pipe line system. As a solution for those problems, research on the ways to mitigate corrosion on the part of 2nd class stainless steel shaft have been undertaken. In the result, not only clarification for the reason of corrosion of the part of stainless steel shaft used mainly for the small-size FRP fishing boat was done, but also most optimal corrosion protection system was developed by experimenting shaft's protection simulation based of the electrochemical cathodic protection principle. In addition, verification through the field test on the optimal cathodic corrosion protection method by means of aluminum sacrificial anode was carried out. In this study, effective and economical shaft's protection system is suggested to the small-size FRP fishing boat operator by substantiating the results obtained from the research on the optimal cathodic protection.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.1-10
• /
• 2002

Relatively being economical in installation and easy in operation, hot-air heating system has been generally used in greenhouse for heating system regardless of high cost in maintenance and uneven distribution of air temperature. Therefore to overcome the disadvantages in maintenance and in distribution of air temperature and to improve efficiency of heating system, this experimental study is performed. This experimental study aims to improve the character of uneven temperature distribution in vertical direction and to reduce energy consumption for heating in a greenhouse. The experiment had been performed to investigate change of thermal environment and effects on reducing energy consumption for heating in greenhouse by additional surface insulation and reduction of indoor-air volume that come by installing transparent vinyl membranes with different height in each house. The results show that there is a wide difference in oil-energy consumption between houses according to condition of surface insulation and change of indoor-air volume. Furthermore, the results show that the efficiency of dual surface is higher than that of change of indoor-air volume in terms of energy saving.

• 한국병원경영학회지
• /
• 제4권1호
• /
• pp.1-20
• /
• 1999

Since the late 1980s, there have been radical changes in the managerial environment of Y University Medical Center(YUMC). Externally, the competition among hospitals has intensified due to the establishment of universal health insurance in 1939 and the entrance of large enterprises into the health care industry in the early 1990s. In addition, government regulation of medical institution is becoming stricter. Also, consumer groups have continued to demand the respect for patient rights and improvement of the quality of medical services. Internally, the financial condition of YUMC has worsened, not only because weak control and poor mediation in its large-scale structure have made its operation inefficient, but also because the rates of increase in the prices of goods and labor have grown faster than any increases in revenues. This study on materials management at YUMC presents a way for YUMC to reduce costs and increase its productivity, thereby overcoming its financial difficulties and dealing with external pressures. This study utilized the case studies of the materials purchasing and medical supply management in the United States and the comparative analysis of management to suggest short-term and long-term alternatives for innovation in YUMC. The goals of the short-term alternatives for innovation are to centralize the purchasing and supply departments and to simplify the decision-making processes. Through these attempts, it is estimated that YUMC's costs could be reduced by $600,000 per year. In the long-term, it is necessary to consider introducing a Supply Processing Distribution(SPD) system and setting up a centralized electronic system for supply and inventory management, although it is difficult to estimate the effect of cost-cutting because of the lack of analysis data. Thus, YUMC should thoroughly analyze initial investment costs and economical efficiency generated from long-term alternatives.