• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.847-849
• /
• 1998

In this paper, we propose the generalized on-line economic dispatch algorithm including transmission loss. it was derived from the process developing matrix form of the classic ELD problem. it can rapidly calculate generation power using transmission loss and transmission loss sensitivity calculated from the result of power flow analysis. Transmission loss sensitivity ${\partial}P_{loss}/{\partial}P_G$ is derived using optimization technique.

• International Journal of Quality Innovation
• /
• 제2권1호
• /
• pp.50-57
• /
• 2001

The economic design of specification limits must be determined on an economic basis where we minimize total loss to society, which consists of both the producer and the consumer. Economic specification limits have been developed based on the assumption that the quality characteristic is normally distributed. Unfortunately, the assumption is not to meet some practical cases. In this paper, some non-normal distributions are considered for quality characteristic with geometrical features. An economic model for selecting the optimum specification limits on the basis of minimizing total cost is introduced. A case study is presented to illustrate the application in practice.

• 대한전기학회논문지
• /
• 제39권4호
• /
• pp.333-340
• /
• 1990

분산 송전송실정보에 의한 전력시스템의 경제운용=The transmission loss information produced in a line may be shared by both end buses connected to the line. Then, the loss may be seen as if it is discretely produced at both buses. Likewise, all transmission losses can be considered as if they are discretely produced at every bus distributed. The bus transmission loss equation can be defined, in which the loss information about connected lines are contained. This formulation can greatly enhance the computational efficiency for the economic control of both real powers and voltages. It requires solutions of two linear matrix equations, one for the calculation of incremental transmission losses and the other for the determination of voltage levels to be controlled. The Proposed approach is demonstrated through three sample systems and it is found that the solutions can be obtained after three iterations regardless of system sizes. This implies that only one-step search would be required for the solution if real informations would be available. Results are compared with those of optimal power flows.

• 대한산업공학회지
• /
• 제15권2호
• /
• pp.57-64
• /
• 1989

An Economic selection of specification limits is considered for a given target value in a complete inspection plan. Each item is inspected, and if it meets the specification, it is accepted. Items less than the lower specification limit are scrapped or sold at a reduced price, and those greater than the upper specification limit are reworked. Cost factors to be considered are economic loss caused by quality deviations, rework cost and scrapping cost. Methods for finding the optimal specification limits are given for the cases of piecewise linear loss function and quadratic loss function with illustrative examples.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.41-49
• /
• 2017

Process quality control, which prevents problems and risks that may occur in products and processes, has been recognized as an important issue, and SPC techniques have been used for this purpose. Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. $C_p$ and $C_{pk}$ are traditional PCIs. These traditional $C_p$ and $C_{pk}$ were used only as a measure of process capability, taking into account the quality variance or the bias of the process mean. These are not given information about the characteristic value does not match the target value of the process and this has the disadvantage that it is difficult to assess the economic losses that may arise in the enterprise. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. $C_{pm}$ is considers both the process variation and the process deviation from target value. And $C_{pm}{^+}$ is considers economic loss for the process deviation from target value. In this paper we developed an improved Expected Loss Capability Index using Reflected Normal Loss Function of Spring. This has the advantage that it is easy to realistically reflect the loss when the specification is asymmetric around the target value. And check the correlation between existing traditional process capability index ($C_{pk}$) and new one. Finally, we propose the criteria for classification about developed process capability index.

• 한국융합학회논문지
• /
• 제7권5호
• /
• pp.127-134
• /
• 2016

본 연구는 제 4기 (2007-2009년도) 국민건강영양조사를 활용하여 65세 이상 1,565명 노인을 대상으로 결손치아에 미치는 요인과 결손치아와 흡연과의 연관성을 알아보고자 하였다. 인구사회학적 특성은 연령에서 나이가 들면서 결손치가 증가하였고, 특히 흡연과 결손치아의 연관성을 알아보기 위하여 사회경제적인 요인 및 행태들을 보정한 후 흡연상태와 성별, 사회경제적인지위, 치과방문패턴과 연관성을 알아본 결과, 남자보다 여자가 현재흡연상태에서 결손치아수가 높게 나타났으며, 사회경제적지위인 '하'에서 결손치아수가 높게 나타났다(p<0.000). 치과 방문패턴에서는 1년에 치과를 2번 이상 방문에서 결손치아수가 높게 나타나 향후 추가적인 연구를 통해 치과차원의 예방적인 금연정책이 필요할 것으로 보인다.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.72-77
• /
• 2014

The cross-section area of cable in the Offshore Wind Farm (OWF) is smaller than that in the onshore wind farm. Because the power loss in OWF is large relatively, the power loss is a key element for the economic evaluation of OWF design. The availability of wind turbine in OWF and the size of OWF are larger than those of onshore wind farm. If the economic evaluation of OWF ignores the availability of wind turbines, the power loss cost of OWF is overpriced. Since there are so many wind turbines, also, the calculation of power loss should be more accurate. In this paper, a method to calculate power loss is proposed for the design of big and complex inner-grid in OWF. The 99.5MW OWF is used for case study to see what effect the proposed method have on the power loss cost.

• 한국사회복지학
• /
• 제42권
• /
• pp.397-422
• /
• 2000

Since 1998 when economic assistance from IMF started, the empirical research on the effects of unemployment and drastic income loss on psychological functioning among the unemployed as well as their family members has increased. These studies have found that unemployment and drastic income loss following unemployment have significant negative influence on the psychological outcomes such as anxiety and depression of the unemployed and their family members. Studies have also focused on the role of social support in this process, and reported that depending on the levels of received social support, unemployment and income loss have differential effects on the psychological aspects of the unemployed. However, these studies have several weaknesses. First, most of the related studies employed the data which were collected from limited regions of the country, which imposes limitations on the scope of the generalizability of research findings. Second, the main independent variables used in these studies were mainly unemployment or income loss, which ignore the psychological evaluation by the employed of their family financial situations. Third, in analyzing the moderating effects of social support, most studies have focused mainly on showing the existence of moderating effects by social support. Consequently, the nature and role of social support remained unanalyzed and left to speculations. The purpose, of this study is to examine the effects of economic pressure experienced by family heads who were unemployed and to analyze the moderating role of social support based on a nationally representative sample. The findings showed that economic pressure has negative influence on anxiety and depressive feelings among the unemployed, and that the effect of economic pressure on depressive feelings were substantially higher among those who have received lower levels of social support from family members than that among those with higher levels of family support.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권1호
• /
• pp.1-14
• /
• 2017

The safety analysis of an earthquake is carried out during the operation of a subsea pipeline and an onshore pipeline. Several cases are proposed for consideration. In the case of a buried pipeline, permanent ground deformation by the earthquake and an increase of internal pressure by the acceleration of the earthquake should be considered. In the case of a subsea pipeline, a bending moment is caused by liquefaction of the backfill material on a trenched seabed, etc., which results in a high bending moment of the buried pipeline. The bending moment causes the collapse of the subsea pipeline or a leak of crude oil or gas, which results in economic loss due to enormous environmental contamination and social economic loss owing to operation functional failure. Thus, in order to prevent economic loss and operation loss, structurally sensitive design with regard to seismic characteristics must be performed in the buried pipeline in advance, and the negative impact on the buried pipeline must be minimized by conducting a thorough analysis on the seabed and backfilling material selection. Moreover, it is proposed to consider the selection of material properties for the buried pipeline. A more economical review is also required for detailed study.

• 대한안전경영과학회지
• /
• 제21권2호
• /
• pp.15-23
• /
• 2019

Among service industries of knowledge based economic era, the roles of educational service field are becoming more important and standard of educational service makes a direct effect on economic development and social growth. Therefore, accurate measurement of service quality is the most important assignment and the measurement of the service quality remains difficult assignment. So, this researcher classified quality attributes applying weighted value and found potential satisfaction level(PSL) and potential customer demand improvement index(PCDI) for trainees participating in national manpower business so as to suggest measurement of service quality and easiness of use and then, calculated satisfaction position and opportunity cost by quality factor with Taguchi's loss fraction. And, improvable satisfaction level was measured, opportunity cost by degree of customer dissatisfaction was quantitatively measured, and a model that can indicate with economic factors was suggested. In addition, methodology of measuring quality cost that can be reduced by quality improvement and direction of strategic decision-making for deciding items to be improved preferentially were suggested with qualitative index that can indicate the degree of customers' dissatisfaction by loss.