• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.355-360
• /
• 2002

ElectroSlag Strip Overlaying (ESSO) process has been around since 1970. ESSO process had limited acceptance due to a few problems associated with the use of this process in its very early stage. Limited knowledge and, most significantly, poor quality of the equipment and welding flux gave the ESSO process a bad name. However, this process is well accepted today and used in North America, Europe and Japan. The ESSO process provides low dilution overlays at high deposition rates, excellent and consistent deposit chemistry with excellent surface quality, and virtually no defects. Capitan has taken this process one step further through extensive research and development of the process itself as well as the equipment. The improvement brought to the process warranted the issuance in May 2000 of an US patent. This study demonstrates the feasibility of this process with immediate positive production results. The main achievements of this work are as follows: $\textbullet$ Development of six various strip-flux combinations on three different base materials: carbon steel, $\frac{1}{4}$ Cr/.5 Mo and 2 $\frac{1}{4}$ Cr/l Mo, fully tested with: penetrant, ultrasound, bends, hardness, overlay chemistry, corrosion and hydrogen disbonding. $\textbullet$ 12" dia. 90 hot formed elbows from straight pipe electroslag overlayed with "1 layer" and "2 layer" Alloy 625 $\textbullet$ a very unique development of miniaturized overlaying equipment able to perform overlay in pipe with diameters as low as 10" (254 mm). This development has large applications in the field of offshore, petrochemical, refining, pulp and paper and power generation industries. The aftermath of this development was its immediate acceptance by major end users with the completion of four projects of overlayed pipe in the USA and Far East Asia.

• 한국가스학회지
• /
• 제24권6호
• /
• pp.47-54
• /
• 2020

취성파괴는 구조물 손상의 원인 중 하나로 대형사고로 발생할 가능성이 있다. -162℃의 초저온 LNG를 저장하는 저장탱크의 내조는 취성파괴가 발생하지 않도록 반드시 이를 확인 할 수 있도록 성능검사를 하여 건설된다. 파괴역학 관점에서는 구조물의 파괴특성을 균열생성과 균열정지로 구분하고 있다. 취성균열이 발생되지 않도록 설계하고 취성 파괴가 발생하여도 취성 파괴가 정지하는 기능이 확인되는 소재가 사용되어야 한다. 본 논문에서는 LNG저장탱크의 내조 소재로 널리 사용되는 9% Ni강 33mm, 37mm, 40mm 두께로 준비하여 취성균열정지 특성을 분석하였다. 기본적인 취성 충격 시험특성을 파악하기 위하여 샤르피 충격시험을 상온, -162℃, -196℃ 조건에서 수행하였다. 또한 -196℃ 환경에서 Duplex ESSO 시험을 수행하여 취성균열정지 파괴인성을 평가하고 그 결과를 분석하였다. 이러한 시험결과를 바탕으로 9% Ni강이 LNG저장탱크 내조소재로 적용되기에 충분한 균열정지 파괴인성을 가지고 있음을 확인하였다.

• 석유와에너지
• /
• 4호통권26호
• /
• pp.91-94
• /
• 1983

이 자료는 Esso Europe Inc.와 DRI Europe Ltd.가 각가 작성 ㆍ발표한 서구의 장기에너지 수급전망을 취합 ㆍ요약한 것을 번역한 것이다. <편집자 주>

• 타이어
• /
• 통권5호
• /
• pp.3-7
• /
• 1967

본논고는 필자가 고무에 관한 기술연수차 체미시 미국 New Jersey 주 Linden 시소재 ESSO연구소에서 강의받은 내용을 초록한 것임.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.103-103
• /
• 2009

As the size of containership increased over 14,000TEU, thick steel plate with high strength has been used. The plate thickness increased over 70mm and yield strength of the steel plate was around $47kg_f/mm^2$. Many researchers reported that the thick welded plate has low crack arrest toughness. They noticed the crack arrest ability is dependent on the plate thickness. In other words, brittle crack propagates straightly along the welded line and make abrupt fracture in the thick plate which causes low $K_{ca}$. In this study, the other factors, especially welding heat input, to cause low crack arrest toughness was investigated for thick steel plate welds. EH grade steel plates were used in this study and 50 to 80 thick plates were tested to confirm thickness sensitivity. Electro gas welding (EGW) and flux cored arc welding (FCAW) were adopted to prepare the welded joints. Temperature gradient ESSO test was performed to measure $K_{ca}$ values with the variation of welding variables. As a result of this study, regardless of plate thickness, welding heat input to cause welding residual stress around crack path is a key factor to control the brittle crack propagation in welded joints.

• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.35-40
• /
• 2015

Recently, there have been the increase of ship size and the development of oil and gas in arctic region. These trends have led to the requirements such as high strength, good toughness at low temperature and good weldability for prevent of brittle fracture at service temperature. There has been the key issue of crack arrestability in large size structure such as container ship. In this report for the first time, crack arrest toughness of thick steel plate welds was evaluated by large scale ESSO test for estimate of brittle crack arrestability in thick steel plate. For large structures using thick steel plates, fracture toughness of welded joint is an important factor to obtain structural integrity. In general, there are two kinds of design concepts based on fracture toughness: crack initiation and crack arrest. So far, when steel structures such as buildings, bridges and ships were manufactured using thick steel plates (max. 80~100mm in thickness), they had to be designed in order to avoid crack initiation, especially in welded joint. However, crack arrest design has been considered as a second line of defense and applied to limited industries like pipelines and nuclear power plants. Although welded joint is the weakest part to brittle fracture, there are few results to investigate crack arrest toughness of welded joint. In this study, brittle crack arrest designs were developed for hatch side coaming of large container ships using arrest weld, hole, and insert technology.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.40-53
• /
• 1996

해저 원유개발이 점차 심해역으로 옮겨감에 따라 부유식 생산시스템이 자켓과 해저파이프라인으로 구성된 종래의 시스템을 대체하고 있다. 계류부유체의 해상에서의 거동은 계류계로 인한 저주파수 파강제력과의 공진에 의해 커질 수 있다. 대진폭 전후동요를 정확하게 추정하기 위해 감쇠계수를 알아야 하며, 감쇠력중에서 표류감쇠가 주요 성분으로 알려져 있다. 본 논문에서는 부유구조물의 전진속도가 작다는 가정아래 표류감쇠를 구하는 근사적인 방법을 채택하였다. Green함수와 속도 포텐셜을 Brard수 ${\tau}$에 관해 점근전개하여 1차항까지 취한 다음 동유체력 및 1차항 파강제력은 전진속도가 없는 경우와 같은 방법으로 구한다. 평균표류력의 전진속도에 대한 변화율로 표류감쇠를 구하였다. 계산방법의 유용성을 검증하기 위하여 선수파에서의 Series 60(Cb=0.7)선형과 Esso-Osaka유조선에 대한 표류력을 계산하여 다른 계산결과와 비교하였다. 선수사파에서의 효과를 고찰하기 위하여 작은 편류각에 대한 계산을 하여 표류감쇠를 추정하였다. 계산결과와 비교하기 위하여 실험을 하였으며 이들은 비교적 잘 일치하였다.

• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.41-46
• /
• 2001

최근에 선박이 대형화되는 추세에 힘입어 조선소는 광폭천흘수선, 초대형 원유운반선 및 초대형 컨테이너선 등을 건조하고 있다. 이와 같은 선박은 상대적으로 다른 선박에 비해 강성이 작기 때문에 파랑 중에서 유탄성 운동을 하게 되고, 입사하는 파고가 작은 경우에도 선체의 2절 모드의 진동에 의해 선체의 갑판이 피로 파괴되는 경우가 종종 발생하는 것으로 알려져 있다. 본 논문에서 전진하는 선박의 유체 압력을 계산하기 위해 적분방정식은 3차원 소오스 분포법을 사용하고, 그린함수는 전진하면서 동요하는 형태를 이용하였다. 방사문제는 선박을 여러 개의 단면으로 나누어 단면간의 간섭효과를 고려하여 heave 및 pitch 강제동요와 관련된 부가질량 및 조파 감쇠계수를 계산하였고, 파강제력은 각 단면에서 선행해에 의한 힘만 고려하였다. 선박의 각 단면의 수직운동은 선박에 대한 운동방정식을 이용하고 강성행렬은 오일러 보 이론에 의해 산정되었다. 계산은 Esso-Osaka 선박을 모델로 도입하여 입사하는 파도의 주파수가 변함에 따른 선박의 각 단면에 대한 운동, 굽힘 모우멘트를 계산하였다.

• Journal of Ship and Ocean Technology
• /
• 제3권3호
• /
• pp.25-44
• /
• 1999

Estimation efficiencies according to different sea trial are investigated in connection with sensitivity analysis, and new trial method is proposed which can improve the estimation efficiency of hydrodynamic derivatives. MMG Equation with Kijima's formula is used for simulation. Extended Kalman Filter is chosen for estimation technique and hydrodynamic derivatives of interest is limited to 12 of those in sway and yaw equations. Esso Osaka is selected for the test ship. Sensitivity analysis and estimation results based on conventional trials show that a more sensitive derivative gives more efficient estimation result. Sensitivities of nonlinear derivatives become pronounced in the trial where steady condition lasts longer such as turning test, while sensitivities of linear derivatives gas a larger values in the trial where unsteady condition lasts longer such as 10deg-10deg zigzag test. Consequently, in new method , named S-type trial, steady and unsteady condition are combined appropriately to increase sensitivities. Linear derivatives are estimated better in S-type trial and the estimation of nonlinear derivatives is improved to extent.

• Journal of information and communication convergence engineering
• /
• 제2권1호
• /
• pp.9-14
• /
• 2004

In this paper the modeling of the RLP layer in CDMA2000 is presented, which uses the NAK based ARQ scheme for Random Error Channels. The RLP performs a partial link recovery through limited number of RLP frame transmission in case of frame error. In case when the RLP fails due to excessive frame error, the control is passed on to the higher (TCP) layer. The TCP layer provides the complete end-to-end recovery. Thus the reliable performance at the TCP/RLP is essential to maintain the required Quality of Service in the DS-CDMA wireless links. The modeling is done for the performance analysis of the system in terms of the throughput and the mean extra delays, which are calculated analytically and are compared with the results generated by the simulations. This paper studies the effect of the random errors over different types of RLP frame formats and also the performance of the NAK based ARQ mechanism used under these conditions. The simulation provides with the over all characteristics of the throughput and the mean extra delay in terms of realistic environment parameters like Eb/No and probability of packet error (PE), based on the channel conditions.