• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1126-1132
• /
• 1999

In this paper, we consider the superposed 16-QAM CDMA system for subband coded (SBC) image transmissions. We divide the SBC image bit into two group according to its significance. First, we investigate the average bit error rate (BER) of the overall system when the significance of bits is ignored. Next, we investigate the optimal signal constellation and processing gain that maximizes the peak signal-to-noise ratio (PSNR) of SBC image, subject to a fixed power and bandwidth constraint. We examine the performance improvement over the conventional equal distane, equal processing gain system, and the equal error protection (EEP) system.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.1
• /
• pp.71-80
• /
• 1991

This paper reveals the effect of the effective case depth(ECD) on the fatigue behavior of a high-frequency induction hardened SM45C in rotated bending fatigue test. In addition, the effects of fracture modes(surface origin type, inner origin type) on it are discussed. The fatigue limit of the induction hardened steel is remarkably increased compared with that of base metal. In addition, the fatigue limit is linearly increased as the effective casedepth grows deep in the region of this experiment (ECD/R;0.23-0.49). The S-N curve and fracture mode in the induction case hardened steel are classified into two kinds, as a result : N$_{f}$<10$^{5}$ ;surface origin type fracture(at high stress), N$_{f}$>10$^{5}$ ; in ner origin type fracture(at low stress). In case of inner origin type fracture; as the effective case depth(ECD) gets deep, the fatigue limit is increased by the reason that the fracture origin moves toward center; in reverse, is decreased by reason that the compressive residual stress gets low. As a result, the increasing effect of the former is much bigger than the decreasing effect of the latter, and the fatigue limit is increased as the ECD gets deep.eep.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1190-1196
• /
• 2014

This paper presents the design of a Frequency Modulated Continuous Wave(FMCW) radar altimeter with wide altitude range and low measurement errors. Wide altitude range is achieved by employing the optic delay in the transmitting path to reduce the dynamic range of measuring altitude. Transmitting power and receiver gain are also controlled to have the dynamic range of the received power be reduced. In addition, low measurement errors are obtained by improving the sweep linearity using the Direct Digital Synthesizer(DDS) and minimizing the phase noise employing the reference clock(Ref_CLK) as the offset frequency of the Phase Locked Loop(PLL).

• Asian Journal of Business Environment
• /
• v.7 no.1
• /
• pp.31-36
• /
• 2017

Purpose - The purpose of the study was to develop a reliable measurement tool for the evaluation of TQM application in Greek education settings and to examine the factors that determine quality of education. Research design, data, and methodology - A questionnaire commencing from the questions included in the Application Guide of Common Assessment Framework was used for research purposes. Each item was scored on a 5point Likert scale - to a sample of 112 educators (55 men, 57 women), all teachers working in public primary education schools. Factor analysis resulted in a questionnaire of 43 items consisting of five factors, teacher satisfaction, school management and operation, motivation, effectiveness of public school leadership and finance management. Results - Results revealed a positive correlation among all factors. Reliability results using Cronbach's α was high (a=.961) for all factors of the questionnaire ranging from α=.930 (for motivation) to α=.797 (for financial management). Additionally, ICC procedure revealed high values for the above mentioned factors. Conclusions - The study resulted in the construction of a reliable questionnaire focused exclusively on TQM that can be used in future studies using larger samples in different areas so as to draw useful conclusions regarding TQM application in Greek education settings and further identify the factors determining quality in education.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4189-4202
• /
• 2014

In this paper, we propose a priority-based unequal error protection scheme of data partitioned H.264/AVC video with hierarchical quadrature amplitude modulation. In order to map data with higher priority onto the most significant bits of QAM constellation points, a priority sorting method categorizes different data partitions according to the unequal importance factor of encoded video data in one group of pictures by evaluated the average distortion. Then we propose a hierarchical quadrature amplitude modulation arrangement with adaptive constellation distances, which takes into account the unequal importance of encoded video data and the channel status. Simulation results show that the proposed scheme improves the received video quality by about 2 dB in PSNR comparing with the state-of-the-art unequal error protection scheme, and outperforms EEP scheme by up to 5 dB when the average channel SNR is low.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.147-155
• /
• 2016

This paper presents a jamming detection and suppression algorithm of a frequency-modulated continuous-wave(FMCW) radar altimeter. The radar altimeter measures the noise level at the noise measuring period before the transmitting and receiving period and finds the number of sampled noise data over the jamming threshold for detecting the jamming. For a jamming suppression technique, we design the time domain jamming suppression, transmit/receive power control and frequency hopping methods. To assess more realistic operation, the radar altimeter was performed a field test. Through the field test, we verified the algorithms successfully.

• Journal of Apiculture
• /
• v.33 no.4
• /
• pp.277-282
• /
• 2018

Ethanol extracted propolis (EEP) was mixed with honey (honeypolis) to dissolve well in water and in vitro skin irritation test was conducted. In vitro method is designed to predict and classify the skin irritation potential of a chemical by assessment of its effect on $EpiDerm^{TM}$, a reconstituted three-dimensional human epidermis model. Cytotoxicity is expressed as the reduction of mitochondrial dehydrogenase activity measured by formazan production from MTT after a 60 min exposure period. In this study under the given conditions honeypolis showed no irritant effects. Honeypolis meets acceptance criteria if: mean absolute OD 570 nm of the three negative control tissues is ${\geq}0.8$ and ${\leq}2.8$, mean relative tissue viability of the three positive control tissues is ${\leq}20%$, standard deviation of relative tissue viability obtained from each three concurrently tested tissues is ${\leq}18%$. Honeypolis is therefore classified as "non-irritant" in accordance with UN GHS "No Category".

• Journal of Information Processing Systems
• /
• v.20 no.1
• /
• pp.85-92
• /
• 2024

In recent years, Bitcoin and Ethereum have witnessed a surge in trading activity, driven by venture capital investment and funding through initial coin offerings (ICOs) and initial exchange offerings (IEOs). This heightened interest has led to kickstarting a vibrant ecosystem for blockchain development. The total number of cryptocurrencies listed on CoinMarketCap.com has reached 2,274 highlights how dynamic and wide blockchain development landscape has grown. In blockchain development, new blockchain projects are being created by forking blockchains inspired by major cryptocurrencies such as Bitcoin and Ethereum. These projects aim to address the perceived shortcomings and improve existing technologies. Altcoins, representing these alternative cryptocurrencies, are an ongoing industry effort to improve performance and security with enhancement proposals such as Bitcoin Improvement Proposals (BIP), Ethereum Improvement Proposals (EIP), and EOSIO Enhancement Proposals (EEP). With competitive attempts to improve blockchain performance and security, an ongoing performance race between various blockchains has taken shape, each claiming its own performance advantages. In this paper, we describe the transactions contained in the blocks of each representative blockchain, and find the factors that affect the transactions per second (TPS) through transaction processing and block generation processes, and suggest their relationship with scalability.

• Journal of Energy Engineering
• /
• v.18 no.3
• /
• pp.147-155
• /
• 2009

Demand for distributed source by new and renewable energy has been gradually increasing recently. For the characteristics of distributed generation, distributed source is located near the distribution system and customers' buildings and can be operated in standalone mode or in interface mode with distribution system. When the distributed sources are interfaced with distribution system, the standard for interfacing distributed source with existing distribution system and operation manual should be updated with revisions in order to manage the distributed source effectively and operate the distribution system stably because how to operate the interfaced system is different from that of existing distribution system. In this paper, the FEP(Front End Processor) using the international standard protocol IEC-60870 for interfacing with distributed resources was designed. The designed system was verified via the test result using main control system for distributed generation and RTU(Remote Terminal Unit) for interface with distributed power generating.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.92-101
• /
• 2005

In this paper, the Gunn diode mount is experimentally designed for use in a W-band waveguide voltage controlled oscillator(VCO). The role of the Gunn diode mount is to match the low impedance of the Gunn diode to the high impedance of waveguide. Computer simulations of VCO characteristics such as center frequency, frequency tuning range, and output power are carried out for various values of disc diameter, disc height, post diameter, and utilized in the experimental optimization of the Gunn diode mount. The designed VCO shows excellent characteristics; 93.9 GHz center fiequency, 600 MHz frequency tuning range with $2{\%}$ linearity, 16 dBm output power.