Abstract
Demand for distributed source by new and renewable energy has been gradually increasing recently. For the characteristics of distributed generation, distributed source is located near the distribution system and customers' buildings and can be operated in standalone mode or in interface mode with distribution system. When the distributed sources are interfaced with distribution system, the standard for interfacing distributed source with existing distribution system and operation manual should be updated with revisions in order to manage the distributed source effectively and operate the distribution system stably because how to operate the interfaced system is different from that of existing distribution system. In this paper, the FEP(Front End Processor) using the international standard protocol IEC-60870 for interfacing with distributed resources was designed. The designed system was verified via the test result using main control system for distributed generation and RTU(Remote Terminal Unit) for interface with distributed power generating.
신 재생에너지를 비롯하여 분산전원의 사용이 매년 증가하고 있다. 분산전원의 그 특성에 의해 배전계통 및 수용가에 근접하여 위치하며 단독운전 또는 배전계통 망에 연계하여 운영될 수 있다. 만약 분산전원이 배전계통에 연계되어 운영될 경우 현재의 배전계통 운영방식과는 다르기 때문에 효율적인 분산전원의 관리 및 안정적인 배전계통을 운영하기 위해서는 분산전원의 연계에 대한 기준 및 새로운 계통운영지침 등이 재정립되어야 할 것이다. 본 논문에서는 향후 분산전원이 배전계통에 연계되어 운전될 때 분산전원의 상태를 감시 및 제어 또는 관리하기 위해서 국제 표준 프로토콜인 IEC-60870으로 분산전원 연계용 FEP(Front-End Processor, FEP)을 설계하였다. 설계한 사항을 검증하기 위하여 분산전원 상위 시스템인 주장치와 하위 시스템인 분산전원 연계용 RTU(Remote Terminal Unit, RTU)를 가지고 시험을 실시하였다. 그 결과 정상적인 데이터를 상위 시스템에서 확인을 통하여 입증하였다.