Journal of Energy Engineering (에너지공학)

The Korean Society for Energy (한국에너지학회)
권호 표지

A Study on Cyclic Variation by Idling in Gasoline Vehicle

가솔린자동차의 무부하 운전에서 사이클변동에 관한 연구

  • Han, Sung-Bin (Department of Mechanical & Automotive Engineering, Induk University) ;
  • Kim, Sung-Mo (Service Quality Information Team, Hyundai Motor Company)
  • Published : 2009.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Cylinder-pressure based combustion analysis provides a mechanism through which a combustion researcher can understand the combustion process. This paper was to identify the most significant sources of cycle-to-cycle combustion variability in a spark ignition engine at idle. To analyse the cyclic variation in the test engine, the burn parameters are determined on a cycle-to-cycle basis through analysis of the engine pressure data. The burn rate analysis program was used in the analysis of the data. Burn parameters were used to determine the variations in the input parameter-i.e., fuel, air, residual mass, and so on.

내연기관의 연소현상을 연구하는 연구자들에게 엔진 내부의 압력값은 연소과정을 이해 할 수 있는 좋은 데이터가 된다. 본 논문에서는 압력값을 이용하여 스파크 점화기관의 무부하에서의 사이클 연소 변동의 중요한 원인이 무엇인가를 규명한다. 또한 실험기관의 연소실에서 채취한 압력 데이터는 사이클 변동의 연소 해석의 기초 데이터와 연소율 해석 등의 데이터분석을 하는데 사용되었다. 연소변수의 입력변수로써 연료, 공기, 잔류량, 등등이 사이클 변동을 결정하는데 사용되었다.

Keywords

References

  1. Shen, H., Hinze, P. C. and Heywood, J. B., 1994, "A Model for Flame Initiation and Early Development inSI Engine and its Application to Cycle-to-CycleVariations," SAE Paper 942049
  2. Hoard, J. and Rehagen, L., 1997, "Relating SubjectiveIdle Quality to Engine Combustion," SAE Paper970035
  3. Randolph, A. L., 1994, "Cylinder - Pressure - BasedCombustion Analysis in Race Engine," SAE Paper942487
  4. Heywood, J. B., 1988, Internal Combustion EngineFundamentals, McGraw -Hill International Editions
  5. Shen, H., Hinze, P. C. and Heywood, J. B., 1996, "A Study of Cycle-to-Cycle Variations in SI EnginesUsing a Modified Quasi - Dimensional Model," SAEPaper 961187
  6. Brown, A. G., Stone, C. R. and Beckwith P., 1996,"Cycle-by-Cycle Variation in Spark Ignition EngineCombustion - Part Ⅰ: Flame Speed and CombustionMeasurements and a Simplified Turbulent CombustionModel," SAE Paper 960612
  7. Cheung, H. M. and Heywood, J. B., 1993, "Evaluationof a One-Zone Burn-Rate Analysis Procedure UsingProduction SI Engine Pressure Data," SAE paper932749
  8. Teng, C., 2005, "Engine Idle Combustion StabilityEvaluation Using Calibration Parameters", SAE Paper 2005-01-2461
  9. Kerns, J. M. and Surnilla, G., 2006, "Fuel Assisted IdleSpeed Control for Lean Burn Gasoline Engines", SAEPaper 2006-32-0009
  10. Woschni, G., 1967, "Universally Applicable Equationfor the Instantaneous Heat Transfer Coefficient in theInternal Combustion Engine," SAE Paper 670931
  11. Deur J., Ivanovic, V., Pavkovic, D. and Jansz, M.,2005, "Identification and Speed Control of SI Enginefor Idle Operating Mode", SAE Paper 2004-01-0898