• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5003-5006
• /
• 2012

Objective: Yanting County is a high risk area for esophageal cancer (EC) in China. The purpose of this study was to describe the mortality and mortality change of EC from 2004 to 2009 in Yanting County. Methods: EC mortality data from 2004 to 2009 obtained from the Cancer Registry in Yanting were analyzed. Annual percentage changes (APC) were calculated to assess the trends in EC mortality. Age-standardized mortality was calculated based on world standard population of 2000. Results: The average EC mortality was 54.7/$10^5$ in males and 31.6/$10^5$ in females over the 6 years. A decline in EC mortality with time was observed in both genders, with a rate of -8.70% per year (95% CI: -13.23%~-3.93%) in females and -4.11% per year (95%CI: -11.16%~3.50%) in males. Conclusion: EC mortality decreased over the six years in both genders, although it remained high in the Yanting area. There is still a need to carry out studies of risk factors for improved cancer prevention and further reduction in the disease burden.

• Journal of Ginseng Research
• /
• v.27 no.1
• /
• pp.24-31
• /
• 2003

This experiment were conducted to select cheaper and more favorable compost among several kinds of composts which were produced by companies, farmers etc. instead of Yakto. Yakto was similar to Standard Yakto in the content of inorganic salts, but PL and HJ composts contained more P$_2$O$\_$5/, K$_2$O, CaO and MgO content compared with Standard Yakto and EC in Yakto was also higher than Standard Yakto did, but the phosphorus, magnesium content and EC of Mushroom compost was higher than that of Standard Yakto. On the other hands, Rice straw compost contained higher contents of phosphorus, potassium and magnesium than Yakto did. Germination rate and early growth of lettuce and C/N ratio were tested for checking decomposed degree. The compost of HJ, Mushroom and Rice straw revealed higher C/N ratio, lower germination rate and shorter shoot length than Yakto showed. It was guessed that these composts were not decomposed enough. Emergence and survival rate of ginseng seeds in Yakto were the highest, but its germination in the composts of Mushroom, PL, HJ and Rice straw, in order, was decreased, and its survival rate in the composts of PL, Mushroom, HJ and Rice straw, in order, was decreased. It was concluded that fully decomposed manure should be used and it needs to Investigate perfect decomposed composts of PL and Mushroom instead of Yakto.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.112-120
• /
• 2008

A series of experiments were conducted to establish a marine ecotoxicological standard method using marine primary producers, Skeletonema costatum, Heterosigma akashiwo, Prorocentrum micans, Isochrysis galbana, Tetraselmis suecica as candidate test species. Marine diatom, S. costatum was selected as standard test species in terms of the ecological roles and international uses as test species. Test methods and test acceptability criteria are as follows; $72{\sim}96$ hr population growth inhibition $EC_{50}$ as endpoint. Static non-renewal method, and population growth rates over 0.04/hr in control as test acceptability criterium. S. costatum is widely distributed in the world ocean and used for standard species of marine toxicity test method by ISO (International Standardization Organization). Possible salinity ranges for this test method are $20{\sim}35\;psu$, and reproducibility and interlaboratory test results were consistent through the calibration tests. Sensitivity of the test method was comparable or better than other toxicity tests such as rotifer neonate mortality, bioluminescent bacterial inhibition, seaweed sporulation and sea urchin fertilization tests.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.67-68
• /
• 2010

The bond stress and crack spacing are effected the calculated crackwidth. EC2 and MC90 suggest crackwidth function that maximum crack spacing and difference average strain. This study is predict crackwidth, according to each design standard than comprison and analyis test data. The result, each design standard ways are predict well to test data.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.348-353
• /
• 2009

Organic materials reveal the remarkable absorption and high buffer capacity for nutrient. Hence, organic materials need some different nutrient management skill from inorganic one. The objective of this study was to evaluate the effect of EC level of nutrient solution on the yield and quality of cut rose grown in the mixed substrate of coir and perlite. 3 EC levels of nutrient solution was treated, which were 0.7, 1.0, 1.3 times of standard solution (Aichiken solution, Japan) for cut rose hydroponics. EC of the standard solution was changed by season following as 1.4 (Apr.~June), 1.0 (July~Aug.), 1.4 (Sep.~Oct.), and $1.6dS{\cdot}m^{-1}$ (Nov.~Mar.) subsequently. The supply of nutrient solution was controlled by the signal of water potential at -5kPa using frequency domain reflectometry (FDR) sensor. As the results, marketable yield was similar for all treatments until 3rd harvest, but was decreased in high EC level from 4th harvest to 7th harvest as final. 0.7 times of standard solution decreased the ratio of unmarketable rose having short stem below 70cm and increased the ratio of high quality rose having long stem above 91cm. The flower weight and stem diameter of cut rose was higher in the low EC treatment than the others.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.5
• /
• pp.449-460
• /
• 2015

Carbonaceous aerosol is generally classified into OC (organic carbon) and EC (elemental carbon) by thermal optical analysis. Both NIOSH (National institute of occupational safety and health) with high temperature (HighT) and IMPROVE-A (Interagency monitoring of protected visual environments) with low temperature (LowT) protocols are widely used. In this study, both protocols were applied for ambient $PM_{2.5}$ samples (Daejeon, Korea) in order to underpin differences in OC and EC measurements. An excellent agreement between NIOSH and IMPROVE-A protocol was observed for TC (total carbon). However, significant differences between OC and EC appeared and the differences were larger for EC than OC. The main differences between two protocols are temperature profile and charring correction method. For the same charring correction method, HighT_OC was 10% higher than LowT_ OC, while HighT_EC was 15% and 33% lower than LowT_EC for TOT (thermal-optical transmittance) and TOR (thermal-optical reflectance), respectively. This difference may be caused by the temperature of OC4 in He step and possibly difference in POC (pryorilized OC) formation. For the same temperature profile, OC by TOT was about 26% higher than that by TOR. In contrast, EC by TOT was about 50% lower than that by TOR. POC was also dependent on both temperature profile and the charring correction method, showing much distinctive differences for the charring correction method (i.e., POC by TOT to POC by TOR ratio is about 2). This difference might be caused by different characteristics between transmittance and reflectance for monitoring POC formation within filters. Results from this study showed that OC and EC depends on applied analysis protocol as shown other studies. Because of the nature of the thermal optical analysis, it may not be possible to have an absolute standard analysis protocol that is applicable for any ambient $PM_{2.5}$. Nevertheless, in order to provide consistent measurement results for scientists and policy makers, future studies should focus on developing a harmonized standard analysis protocol that is suitable for a specific air domain and minimizes variations in OC and EC measurement results. In addition, future elaborate studies are required to find and understand the causes of the differences.

• Journal of Korean Society on Water Environment
• /
• v.33 no.1
• /
• pp.90-96
• /
• 2017

Many sewage treatment plants have applied the advanced technology of chemical coagulant system to remove phosporus in Korea. However there are some problems for the injection of optimum coagulant dosage. In order to solve these problems, the research related to the more cost-effective automatic total phosphorus coagulation control system using an EC(Electrical Conductivity) have been in progress. This study was conducted by the same process and operation method as the Lab-scale for public small town sewage treatment plant. First, it confirmed the correlation among the EC, PO4-P and coagulant dosage in the Lab-scale MSBR(Membrane Sequencing Batch Reactor) process. Next, it analyzed that correlation coefficient of EC and the coagulant dosage was 0.92 in the Full-scale MSBR process. As a result, not only T-P removal efficiency was doubled but also it satisfied the effluent water quality standard in a stable manner. In addition, by applying the automatic control system using the EC, compared to the fixed coagulant injection system the coagulant dosage could be reduced by 28%.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.1
• /
• pp.25-31
• /
• 2003

This research aimed to experimentally and theoretically investigate the moment strength of deck plates. A moment experiment was carried out using a full-scale 14 specimen. To prevent local buckling, the point load was applied at 1/4 points. After the experiment, theoretical analysis was conducted and the differences between various codes were identified. The experimental results were compared with AISI (the American Iron and Steel Institute), EC (Euro Code) 3, and KS (Korea Standard) codes. Analysis results are summarized as follows: (1) the failure mode was influenced by local buckling at the midpoint of the beam and/or at the intermediate loading point: (2) if yielding first occurred at the tension side, the moment strength would increase as the plastic reservation of the tension zone acted: (3) the experimental results were closest to the EC3 codes in which the partial plastic reservation was considered; (4) statistical evaluation based on the EC3 Annex Z showed that the partial resistance safety coefficient calculated applying to the EC3 formula, $^{\circ}{_M}$, was placed within 1.1 which was the target value of EC3 code; and (5) the analytical power of AISI and KS codeswere expected to improve into the level of EC3 codes if the concept of plastic reservation of the tension side would be introduced to them.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.90-96
• /
• 2003

The purpose of this study is to develop the standards for construction documents. The standards will facilitate efficient exchange and sharing of construction documents among the participants such as owners, designers, constructors and other related parts throughout construction work process. For this reason, this study is intended to define the requirements for establishing XML-based electronic document standardization system, and to prepare the plan for developing XML electronic document in a consistent way.

• IE interfaces
• /
• v.10 no.3
• /
• pp.95-107
• /
• 1997

In this paper, we suggest the system analysis method that integrate IDEFO and IDEFIX. Based on the method, we propose the procedure which can be used to build CALS/EC system in manufacturing industry. Also, applying the procedure and method to electronic company, we construct the CALSEC prototype system. With the three types of view-point, process, information technology and standard, we proceed the implementation of CALS/EC in manufacturing industry. We divide the electronic company's process into five core process, 1)processes-product concept planning process. 2)product development process, 3)procurement process, 4)delivery/distribution process and 5)customer service process.