• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.86-88
• /
• 1997

The detection of the normal zones in the coil winding and the initiation of the proper dump sequence have been one of the most important areas in the superconducting magnet technology. In this paper, the process to derive optimal dump sequence has been investigated through quench simulation and analysis of magnetically coupled superconducting magnet system. The magnet terminal voltage and maximum temperature rise in the quench initiated point are calculated with respect to various input variables such as operation current, dump resistance, etc. The experimental system is comprised of sc solenoidal coil, data aquisition device, external circuit breakers and dump resistor. The quench behavior of the magnet(e.g., temperature profile and the voltage signal) was measured. From this results, theoretical predictions were found to coincide with the experimental observations.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.594-609
• /
• 1998

In this dissertation, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the seven indices, $C_p,\;C_{pk},\;C_{pm},\;C^{\ast}_{pm},\;C_{pmk},\;C_s,\;C_{psk}$ in terms of sensitivity to departure of the process median from the target value T=M from the most sensitive one up to the least sensitive are $C_{psk},\;C_{s},\;C_{pmk},\;C^{\ast}_{pm},\;C_{pm},\;C_{pk},\;C_p$. i.e, By the criteria adopted for evaluation of PCI's $C_{psk}$ is the most sensitive to the departure of the process median from target and $C_p$ is least

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1E
• /
• pp.11-18
• /
• 2003

Non-singular boundary element method (BEM) codes are developed in acoustics application. The BEM code is then used to calculate unknown boundary surface normal displacements and surface pressures from known exterior near field pressures. And then the calculated surface normal displacements and surface pressures are again applied to the BEM in forward in order to calculate reconstructed field pressures. The initial exterior near field pressures are very well agreed with the later reconstructed field pressures. Only the same number of boundary surface nodes (1178) are used for the initial exterior pressures which are at first calculated by Finite Element Method (FEM) and BEM. Pseudo-inverse technique is, used for the calculation of the unknown boundary surface normal displacements. The structural object is a tuning fork with 128.4 ㎐ resonant. The boundary element is a quadratic hexahedral element (eight nodes per element).

• The Mathematical Education
• /
• v.39 no.2
• /
• pp.167-177
• /
• 2000

In this thesis we concerned with the degree of similarity in pairs of scores having a common mean and variance could express similarity in terms of the absolute difference between the standardized scores. We particulary discussed the distribution of absolute differences between pairs of T scores among many standardized scores and demonstrated the procedures for calculating the lower limit of Med(│d│) values i. e. the maximum possible similarity with medians and correlation coefficients of the equivalent form tests by using the folded normal distribution, although other researchers expressed the degree of similarity using only the standard normal distribution. We also described many cases how to use those techniques and to apply effectively them in real evaluation fields.

• MALSORI
• /
• no.56
• /
• pp.159-172
• /
• 2005

This paper analyzes the vocal tract area estimation algorithm used as a part of a speech analysis program to help deaf children correct their pronunciations by comparing their vocal tract shape with normal children's. Assuming that a vocal tract is a concatenation of cylinder tubes with a different cross section, we compute the relative vocal tract area of each tube using the reflection coefficients obtained from linear predictive coding. Then, we obtain the absolute vocal tract area by computing the height of lip opening with a formula modified for children's speech. Using the speech data for five Korean vowels (/a/, /e/, /i/, /o/, and /u/), we investigate the effects of the sampling frequency, frame size, and model order on the estimated vocal tract shape. We compare the vocal tract shapes obtained from deaf and normal children's speech.

• Proceedings of the KSPS conference
• /
• 2003.10a
• /
• pp.55-58
• /
• 2003

The purpose of this paper was to analyze the effects of nasalization on vowels. Ten males and 7 females produced 5 vowels (/a/, /e/, /i/, /o/, /u/) in conditions: normal and nasalized. In this study we compared normal vowels' formant with nasalized vowels' and examined nasal-formant in the nasalized vowels. The results was as follows: First, there was a significant difference between normal vowels and nasalized in terms of F1 and F2. Second, the nasal formants were observed in nasalized vowels more frequently in females than males. Third, N1 appeared to influence F1 of vowels whereas N2 seemed to have an impact on F2 and/or F3.

• Journal of applied mathematics & informatics
• /
• v.27 no.5_6
• /
• pp.1061-1071
• /
• 2009

For real generalized reflexive matrices R, S, i.e., $R^T$ = R, $R^2$ = I, $S^T$ = S, $S^2$ = I, we say that real matrix X is (R,S)-symmetric, if RXS = X. In this paper, an iterative algorithm is proposed to solve the least-squares problem of matrix equation AXB = C with (R,S)-symmetric X. Furthermore, the optimal approximation solution to given matrix $X_0$ is also derived by this iterative algorithm. Finally, given numerical example and its convergent curve show that this method is feasible and efficient.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.1
• /
• pp.50-58
• /
• 1984

In the present paper are calculated and compared the stresses on the normal tools and the restricted tools which have three various rake angles by Least Square Method. The results obtained are summerized as follows. The tool displacement at rake angle .alpha. = 12 .deg. and .alpha. = 0 .deg. is positive value in the principal cutting direction and negative value in the feed direction. At rake angle .alpha. = -12 .deg. the displacement is negative value in both of directions. The principal stress of the restricted and normal tool is maximum at the tip of the tool, the shear stress is maximum after a certain distance from the tip. The result of FEM and P.E method shows that in the range of rapid decreasing of normal stress of the tool edge, the shear stress is maintaining a certain value. This is due to the friction characteristic of the chip.

• Kyungpook Mathematical Journal
• /
• v.51 no.1
• /
• pp.1-10
• /
• 2011

Let (R, T) be a normal pair of commutative rings (i.e., R ${\subseteq}$ T is a unita extension of commutative rings, not necessarily integral domains, such that S is integrally closed in T for each ring S such that R ${\subseteq}$ S ${\subseteq}$ T) such that the total quotient ring of R is a von Neumann regular ring. Let P be one of the following ring-theoretic properties: going-down ring, extensionally going-down (EGD) ring, locally divided ring. Then R has P if and only if T has P. An example shows that the "if" part of the assertion fails if P is taken to be the "divided domain" property.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1113-1120
• /
• 1998

This paper introduces a channel model that is a combination of Rice and log-normal statistics, with independent shadowing affectingeach direct and diffuse component, repectively. This model extends the channel model of a combined Rice and Log-normal, proposed by Corazza, to include the independent shadowing. The validity of model is confirmed by comparisons with the data collectedin the literature, the analytical model, and the computer model in terms of probability distribution of the evvelope of each model. The model turns out to be one of many well-known narrowband models in limiting cases, e.g. Rayleigh, Rice, log-normal, Suzuki, Loo, and Corazza. Finally, the examples of bit error probability evaluations for several values of the elevation angle in the channel are provided.