• 한국통신학회논문지
• /
• 제34권4A호
• /
• pp.309-315
• /
• 2009

무선 Ad-hoc 네트워크는 이동 노드로 구성되는 동적 네트워크이다. 일반적으로 Ad-hoc 네트워크에서 노드는 랩탑, PDA, 모바일 폰 등과 같은 장치로 블루투스나 IEEE 802.11(위피) 네트워크 인터페이스의 특징을 가지고 분산방식으로 통신을 한다. 이러한 Ad-hoc 네트워크의 특성에 기인한 이동성은 라우팅 프로토콜 디자인에 중요한 특징적 요소가 된다. 본 논문에서는 토폴로지 변화에 잘 적응하는 향상된 경로 관리 기법을 제안한다. 제안된 알고리즘에 주된 특징은 경로 실패를 방지하기 위해서 링크 단절 전에 다음-홉 노드를 대체 이웃 노드에 스위칭 하는 방식이다. NS2를 이용한 무선 Ad-hoc 네트워크의 다양한 환경에서 시뮬레이션을 수행한 결과 제안된 알고리즘 성능이 기존의 AODV 프로토콜에 비교하여 향상되었음을 보인다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.424-429
• /
• 2003

This paper proposes a swing-arm type dual-stage actuator, which consists of a PZT actuator for fine motion and a VCM(Voice Coil Motor) for coarse motion, for SFF ODD(Small Form Factor Optical Disk Drive), in order to achieve fast access speed and precise track following control. We focus our attention on the design and control of the PZT actuator, because there have been a lot of previous researches related to the VCM and dual-stage actuators. Due to the dual cantilever structure, the PZT actuator can generate precise translational tracking motion at its tip where optical pickup is attached at, and the effect of hysteric behavior of the PZT element is reduced. The dynamic model of the PZT actuator is derived by using the Hamilton's principle, and verified by comparing with the experimental frequency response. The sliding mode control is designed in order to be robust against modeling uncertainties. Simulations and experimental results confirm the effectiveness of the suggested control scheme.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.196-202
• /
• 2002

In this work, we propose a new type of HDD suspension featuring shape memory alloy (SMA) actuator in order to prevent the contact between the slider and disk. The principal design parameters are obtained from the modal analysis using finite element analysis, and then the dynamic model is established to formulate the control scheme for Non-Contact Start/stop mode drive. Subsequently, a robust H$\_$$\infty$/ control algorithm is designed by integrating experimentally-Obtained SMA actuator dynamics to the proposed HDD suspension system. The controller is empirically realized and control results for the load/unload profiles are presented in time domain. In addition, the contact signal between the slider and disk is measured by the electrical resistance method.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.137-146
• /
• 2001

A robust controller with the sliding mode is proposed for stable dynamic walking of the biped robot in this paper. For the robot system to be controlled, which is modeled as 14 DOF rigid bodies by the method of multi-body dynamics, the joint angle trajectories are determined by the velocity transformation matrix. Also Hertz force model and Hysteresis damping element are utilized for the ground reaction and impact forces during the contact with the ground. The biped robot system becomes unstable since those forces contain highly confused noise components and some discontinuity, and modeling uncertainties such as parameter inaccuracies. The sliding mode control is applied to solve above problems. Under the assumption of the bounded estimation errors on the unknown parameters, the proposed controller provides a successful way to achieve the stability and good performance in spite of the presence of modeling imprecisions of uncertainties.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1235-1242
• /
• 2006

Viscoelastic damping materials are widely used to reduce noise and vibration because of its low cost and easy implementation, for examples, on the body structure of passenger cars, air planes, electric appliances and ships. To design the damped structures, the material property such as elastic modulus and loss factor is essential information. The four-parameter fractional derivative model well describes the nonlinear dynamic characteristics of the viscoelastic damping materials with respect to both frequency and temperature with fewer parameters than conventional spring-dashpot models. However the identification procedure of the four-parameter is very time-consuming one. An efficient identification procedure of the four-parameters is proposed by using an FE model and a gradient-based numerical search algorithm. The identification procedure goes two sequential steps to make measured FRFs coincident with simulated FRFs: the first one is a peak alignment step and the second one is an amplitude adjustment. A numerical example shows that the proposed method is efficient and robust in identifying the viscoelastic material parameters of fractional derivative model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권12호
• /
• pp.5422-5441
• /
• 2016

Despite the abundant literature in the field, there is still the need to find a time-efficient, highly accurate, easy to deploy and robust localization algorithm for real use. The algorithm only involves minimal human intervention. We propose an enhanced Received Signal Strength Indicator (RSSI) based positioning algorithm for Wi-Fi capable devices, called the Dynamic Weighted Evolution for Location Tracking (DWELT). Due to the multiple phenomena affecting the propagation of radio signals, RSSI measurements show fluctuations that hinder the utilization of straightforward positioning mechanisms from widely known propagation loss models. Instead, DWELT uses data processing of raw RSSI values and applies a weighted posterior-probabilistic evolution for quick convergence of localization and tracking. In this paper, we present the first implementation of DWELT, intended for 1D location (applicable to tunnels or corridors), and the first step towards a more generic implementation. Simulations and experiments show an accuracy of 1m in more than 81% of the cases, and less than 2m in the 95%.

• 전기전자학회논문지
• /
• 제9권1호
• /
• pp.72-78
• /
• 2005

본 논문은 단일입력 단일출력 비선형 계통에 대해서 강인한 출력궤환 제어기를 제시한다. 이전의 출력궤환 비선형 제어기가 모두 동적인 관측기 기반으로 설계된 반면 본 논문에서는 출력의 과거값들만을 이용하여 상태변수를 추정하는 새로운 방식을 제안하고 이를 후방차분 상태추정기라 명했다. 실제 상태변수값과 추정치와의 오차를 보상하기 위해서 제어입력에 강인제어항을 추가하였고 그것의 이득을 자동으로 조정하는 적응 알고리듬을 채택했다. 전체 폐루프 시스템은 출력 추종 오차가 점근적으로 안정하도록 그리고 모든 신호가 유계이도록 제어입력과 적응법칙이 설계된다. 제시된 제어기를 역진자 계통에 적용한 모의실험을 통해서 성능을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1220-1230
• /
• 2006

In this paper, we propose a flew technique to the design and real-time control of an adaptive controller for robotic manipulator based on digital signal processors. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved Lyapunov second method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot manipulator with eight joints. joint space and cartesian space.

• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.615-620
• /
• 2015

DOB (Disturbance Observer) is an useful control method for estimating the disturbance applied to dynamic systems. Disturbance observer can be used to implement a robust control system to generate a control input for rejecting the disturbance, and it can be also used to estimate the disturbance to obtain information. The system that uses disturbance estimation is investigated for high performance control such as automatic door systems, walking robot and electric power steering system in vehicles. In this paper, a novel disturbance observer which is called disturbance and current observer for estimating load torque in the motor system is proposed. The difference between the DOB for disturbance rejection and DCOB is mathematically verified. Current and angular velocity are required for estimating the load torque of the motor in DOB. However, the DCOB can estimate load torque and current without current sensor. DCOB is designed based on modeling of the motor system. Appropriate Q-filter is selected and the applicability of DCOB is verified by simulation. The estimated disturbance and current of the electric motor can be verified without current sensor, as experiments of the actual motor system.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.156-165
• /
• 2003

본 논문은 불확실한 비선형 계통에 대해서 강인한 적응 퍼지 관측기를 설계하는 방법을 제시한다. 새로 제시하는 관측기는 관측기 설계시 관측오차의 동특성식이 SPR (strictly positive real)이어야 한다는 조건이 불필요하다. 또한 불확실한 항에 대한 유계상수도 추정하는 알고리듬을 사용하여 강인항의 이득값을 설계자가 미리 결정할 필요가 없게 된다. 설계된 관측기를 포함한 전체 폐루프 계통에 대해서 리아프노브 안정도를 증명하였으며 관측오차를 포함한 계통의 모든 신호들의 반전역적 유계(semi-global uniform ultimate boundedness)임을 증명하였다. 이론적으로 도출된 결과를 mass-spring-damper 계통에 대한 모의실험을 수행하여 제안된 관측기의 효율성과 성능을 보였다.