• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.580-586
• /
• 2016

The ultra-long stroke engine was developed to generate greater power at lower speeds than previous designs to enhance the propulsion efficiency. The torsional exciting force, on the other hand, was increased significantly. Therefore, it is possible to control the torsional vibration of its shaft system equipped with the fuel efficient ultra-long stroke engine by adopting a damper although the torsional vibration could be controlled adequately by applying tuning and turning wheels on the engine previously. In this paper, the dynamic characteristics of a viscous-spring damper used to control the torsional vibration of the corresponding shaft system are reviewed and then examined to determine what vibration characteristics might be used to optimize the viscous-spring damper. In some cases, operators of eco-ships have recently experienced the problem of delayed RPM acceleration. It has been suggested that the proper measures for controlling the torsional vibration in the shaft system should involve adjusting the design parameters of its damper determined by the optimum damper design theory to avoid the fatigue damage of shafts.

• The KIPS Transactions:PartA
• /
• v.17A no.6
• /
• pp.265-274
• /
• 2010

As the process technology scales down and integration densities continue to increase, interconnection has become one of the most important factors in performance of recent multi-core processors. Recently, to reduce the delay due to interconnection, 3D architecture has been adopted in designing multi-core processors. In 3D multi-core processors, multiple cores are stacked vertically and each core on different layers are connected by direct vertical TSVs(through-silicon vias). Compared to 2D multi-core architecture, 3D multi-core architecture reduces wire length significantly, leading to decreased interconnection delay and lower power consumption. Despite the benefits mentioned above, 3D design technique cannot be practical without proper solutions for hotspots due to high temperature. In this paper, we propose three floorplan schemes for reducing the peak temperature in 3D multi-core processors. According to our simulation results, the proposed floorplan schemes are expected to mitigate the thermal problems of 3D multi-core processors efficiently, resulting in improved reliability. Moreover, processor performance improves by reducing the performance degradation due to DTM techniques. Power consumption also can be reduced by decreased temperature and reduced execution time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.119-126
• /
• 2011

During precise survey on the top of High rise buildings and civil structures, optical surveying equipments like a Total Station are not recommended to use because of some reasons that uneasier alignment with reflectors located at the top of building, increasing error depends on increasement of observation distance and unavailable dynamic positioning etc. Recently various GPS positioning methods have been applied to this job however almost of them are post-processing method which is required much longer time during for whole process includes stake-out, cross checking, fixing positions and final inspections. Therefore, in this study, we applied with RTK surveying system which allows stake-out and inspection in realtime to avoid delaying of construction schedule and also applied with Quasi Static RTK measurement and network adjustment to get a high accuracy within a few millimeters in structure positioning to achieve a successful management for process and quality control of the project. As a result, very high accurate surveying for structures within approx. 2mm in realtime has been achieved when surveyor conduct a network adjustment using least square method for 4 base lines created by Quasi Static RTK data and we expect this method will be applied to construction survey for high rise buildings and civil structures in the future.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.327-334
• /
• 2008

Understanding the chemical characteristics of sediments and the nutrient diffusion from sediments to the water body is important in the management of surface water quality. Changes in chemical properties and nutrient concentration of a submerged soil were monitored for 6 months using a microcosm with the thickness of 30cm for upland soil and 15cm of water thickness above the soil. The soil color changed from yellowish red to grey and an oxygenated layer was formed on the soil surface after 5 week flooding. The redox potential and the pH of the pore water in the microcosm decreased during the flooding. The nitrate concentration of the surface water was continuously increased up to $8\;mg\;l^{-1}$ but its phosphate concentration decreased from $2\;mg\;l^{-1}$ to $0.1\;mg\;l^{-1}$ during flooding. However, the concentrations of $NH_4^+$, $PO_4^{3-}$, Fe and Mn in the pore water were increased by the flooding during this period. The increased $NO_3^-$ in the surface water was due to the migration of $NH_4^+$ formed in the soil column and the oxidation to $NO_3^-$ in the surface water. The increased phosphate concentration in the pore water was due to the reductive dissolution of Fe-oxide and Mn-oxide, which scavenged phosphate from the soil solution. The oxygenated layer played a role blocking the migration of phosphate from the pore water to the water body.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.83-95
• /
• 2007

We are motivated by how offline and online firms compete. The Internet made many conventional offline firms build a dynamic online business as another sales channel using their advantages such as brand equity, an existing customer base with comprehensive purchasing data, integrated marketing, economies of scale, and longtime experience with the logistics of order fulfillment and customer service. Even though the hybrid selling using both offline and online channel seems to have advantages over a pure online retailer, all the conventional offline firms are not seen to create an online business. Many conventional offline firms began to launch online business since the Internet era, however, just being online business is not likely to guarantee success. According to Bizate.com's report whether the hybrid channel strategy is successful is still under investigation. For example, consider the classic case of Barnes and Noble versus Amazon.com, Barnes and Noble was already the largest chain of bookstores in the U,S., when Amazon.com was established in 1995, BarnesandNoble.com followed suit in 1997, After suffering losses in its initial years, Amazon finally turned profitable in 2003. In 2004, Amazon's net income was $588 million on revenues of $6.92 billion, while Barnes and Noble earned $143 million on revenues of $4.87 billion, which included BarnesandNoble.com's loss of $21 million on revenues of $420 million. While these examples serve to motivate our thinking, it does not explain when offline firms should venture online. It also does not provide an analytical framework that can generalized to other competitive online-offline situations. We attempt to do this in this paper and analyze a hybrid channel model where a conventional offline firm competes against online firms using its own direct online channels. We are particularly interested in an optimal channel strategy when a conventional offline firm sells its products through its own direct online channel to compete with other rival online firms. We consider two situations where its direct online channel and other online firms are symmetric and asymmetric in the brand effect. The analysis of this paper presents several findings. In the symmetric model where a hybrid firm's online channel is not differentiated from a pure online firm, (i) a conventional offline firm will not launch its online business. In the asymmetric model where a hybrid firm's online channel is differentiated from a pure online firm, (ii) a conventional offline firm can launch its online business if its brand effect is greater than a certain threshold. (iii) there is a positive relationship between its brand effect and online customer costs showing that a conventional offline firm needs more brand effect in order to launch online business as online customer costs decrease. (iv) there is a negative relationship between its brand effect and the number of customers with access to the Internet showing that a conventional offline firm tends to launch its online business when customers with access to the Internet increases.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.18-27
• /
• 2010

In u-GIS environment, GeoSensor environment requires that dynamic data captured from various sensors and static information in terms of features in 2D or 3D are fused together. GeoSensors, the core of this environment, are distributed over a wide area sporadically, and are collected in any size constantly. As a result, storage space could be exceeded because of restricted memory in DSMS. To solve this kind of problems, a lot of related studies are being researched actively. There are typically 3 different methods - Random Load Shedding, Semantic Load Shedding, and Sampling. Random Load Shedding chooses and deletes data in random. Semantic Load Shedding prioritizes data, then deletes it first which has lower priority. Sampling uses statistical operation, computes sampling rate, and sheds load. However, they are not high accuracy because traditional ones do not consider spatial characteristics. In this paper 'Pre-Filtering based Post Load Shedding' are suggested to improve the accuracy of spatial query and to restrict load shedding in DSMS. This method, at first, limits unnecessarily increased loads in stream queue with 'Pre-Filtering'. And then, it processes 'Post-Load Shedding', considering data and spatial status to guarantee the accuracy of result. The suggested method effectively reduces the number of the performance of load shedding, and improves the accuracy of spatial query.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.241-252
• /
• 2016

In this study, the characteristics of flow and bed changes with variation of space and length of serial spur dikes were investigated with 2 dimensional numerical simulation. Upstream spur dike was affected by flow and made a role as a single spur dike. As time increased, local scouring was developed around outside of spur dike, and migrated upstream. The aggradation of the bed at the back of spur-dike was made at the initial stage of experiment and numerical modelling. However, the aggradation of the bed was increased in the downstream area. The scour whole around a spur dike upstream was not deep as the Dimensionless spur-dike interval (b) of the dike increased. The depth of scour hole was nearly constant at the dynamic equilibrium state. The dimensionless scour depth ($y_s/H$) increased with L/b. The spur dike downstream had the characteristics of single spur dike as the L/b was larger than 10. However, the spur dike downstream was affected by the dike upstream as the L/b was less than 4, and the bed of the upstream in the spur dike was aggradated and the effects of the serial spur dikes on the bed decreased.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.19-27
• /
• 2013

PURPOSES : This study aims to investigate the snow-melt effects of an underground electric heater's snow-melt system via a field performance test, for evaluating the suitability of the system for use on a concrete pavement. The study also investigates the effectiveness of dynamic measures for clearing snow after snowfall events. METHODS : In order to check the field applicability, in November 2010, specimens were prepared from materials used for constructing concrete pavements, and underground electric heating meshes (HOT-mesh) were buried at depths of 50 mm and 100 mm at the site of the Incheon International Airport Construction Research Institute. Further, an automatic heating control system, including a motion sensor and pavement-temperature-controlled sensor, were installed at the site; the former sensor was intended for determining snow-melt effects of the heating control system for different snowfall intensities. Pavement snow-melt effects on snowy days from December 2010 to January 2011 were examined by managing the electric heating meshes and the heating control system. In addition, data on pavement temperature changes resulting from the use of the heating meshes and heating control system and on the dependence of the correlation between the outdoor air temperature and the time taken for the required temperature rise on the depth of the heating meshes were collected and analyzed. RESULTS : The effects of the heating control system's preheat temperature and the hot meshes buried at depths of 50 mm and 100 mm on the melting of snow for snowfalls of different intensities have been verified. From the study of the time taken for the specimen's surface temperature to increase from the preheat temperature ($0^{\circ}C$) to the reference temperature ($5{\sim}8^{\circ}C$) for different snowfall intensities, the correlation between the burial depth and outdoor air temperature has been determined to be as follows: Time=15.10+1.141Depth-6.465Temp CONCLUSIONS : The following measures are suggested. For the effective use of the electric heating mesh, it should be located under a slab it may be put to practical use by positioning it under a slab. From the management aspect, the heating control system should be adjusted according to weather conditions, that is, the snowfall intensity.

• Agribusiness and Information Management
• /
• v.11 no.1
• /
• pp.27-39
• /
• 2019

Agricultural risks are exacerbated by a variety of factors ranging from climatevariability and change, frequent natural disasters, uncertainties in yields and prices, weakrural infrastructure, imperfect markets and lack of financial services including limited spanand design of risk mitigation instruments such as credit and insurance. Indian agriculture has little more than half (53%) of its area still rainfed and this makes it highly sensitive to vagaries of climate causing unstable output. Besides adverse climatic factors, there are man-made disasters such as fire, sale of spurious seeds, adulteration of pesticides and fertilizers etc., and all these severely affect farmers through loss in production and farm income, and are beyond the control of farmers. Hence, crop insurance' is considered to be the promising tool to insulate the farmers from risks faced by them and to sustain them in the agri-business. This paper critically evaluates the performance of recent crop insurance scheme viz., Pradhan Mantri Fasal Bhima Yojana (PMFBY) and its comparative performance with earlier agricultural insurance schemes implemented in the country. It is heartening that, the comparative performance of PMFBY with earlier schemes revealed that, the Government has definitely taken a leap forward in covering more number of farmers and bringing more area under crop insurance with the execution of this new scheme and on this front, it deserves the appreciation in fulfilling the objective for bringing more number of farmers under insurance cover. The use of mobile based technology, reduced number of Crop Cutting Experiments (CCEs) and smart CCEs, digitization of land record and linking them to farmers' account for faster assessment/settlement of claims are some of the steps that contributed for effective implementation of this new crop insurance scheme. However, inadequate claim payments, errors in loss/yield assessment, delayed claim payment, no direct linkage between insurance companies and farmers are the major shortcomings of this scheme. This calls for revamping the crop insurance program in India from time to time in tune with the dynamic changes in climatic factors on one hand and to provide a safety-net for farmers to mitigate losses arising from climatic shocks on the other. The future research avenues include: insuring the revenue of the farmer (Price × Yield) as in USA and more and more tenant farmers should be brought under insurance by doling out discounts for group coverage of farmers like in Philippines where 20 per cent discount in premium is given for a group of 5-10 farmers, 30 per cent for a group of 10-20 and 40 per cent for a group of >20 farmers.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.11-26
• /
• 2013

In the wireless Internet, it is so restrictive to use the IPSec. The MIPv4 IPSec's path cannot include wireless links. That is, the IPSec of the wireless Internet cannot protect an entire path of Host-to-Host connection. Also wireless circumstance keeps a path static during the shorter time, nevertheless, the IKE for IPSec SA agreement requires relatively long delay. The certificate management of IPSec PKI security needs too much burden. This means that IPSec of the wireless Internet is so disadvantageous. Our paper is to construct the Mobile IPSec proper to the wireless Internet which provides the host-to-host transport mode service to protect even wireless links as applying excellent WP-IBE scheme. For this, Mobile IPSec requires a dynamic routing over a path with wireless links. FA Forwarding is a routing method for FA to extend the path to a newly formed wireless link. The FA IPSec SA for FA Forwarding is updated to comply the dynamically extended path using Source Routing based Bind Update. To improve the performance of IPSec, we apply efficient and strong future Identity based Weil Pairing Bilinear Elliptic Curve Cryptography called as WP-IBE scheme. Our paper proposes the modified protocols to apply 6 security-related algorithms of WP-IBE into the Mobile IPSec. Particularly we focus on the protocols to be applied to construct ESP Datagram.