• Journal of Environmental Health Sciences
• /
• v.37 no.2
• /
• pp.94-101
• /
• 2011

Objectives: The purpose of this study is to evaluate the noise exposures of firefighters according to their time-dependent activity patterns. Methods: Personal exposure levels were measured for six days and nights using noise dosimeters; three days and nights for on-duty tasks, the other days and nights for off-duty activities. Results: The total amount of time spent in the workplace was 13,677 min (67%), outside areas 4,833 min (23%), in transit 1,002 min (5%), and other indoor area 807 min (4%) during a working period. However, during off-days they spent 10,858 min (76%) at home, 1,382 min (10%) outdoors, 1,225 min (9%) other indoors, and 493 min (3%) in transit. As a result of individual exposure levels, TWA did not exceed 90 dBA of the occupational exposure limit for the majority of the firefighters, whereas the levels of Lmax were 119 dBA, which were higher than the noise levels of firefighters in USA. Sometimes during dispatching the levels of Lpeak exceeded the ACGIH exposure standard (140 dBC). The Leq levels in transit were higher than the levels in home and other indoors even though the activity time is short. Conclusions: This paper characterized the noise exposure patterns of firefighters in Korea. We suggest that special noise sources, including sirens and speaker phones, should be readjusted to reduce noise exposure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.31-39
• /
• 2010

Although driving patterns strongly influence greenhouse gas and air pollutant emission rate from light duty vehicles, emission measurements have been mainly based on chassis dynamometer testing with one standard driving pattern. And there has been limited work on quantifying the independent effect of driving parameters on emission rate because of multidimensional nature of real-world driving pattern. The objective of this study is to obtain the quantitative effect of relative positive acceleration (RPA) on vehicle emission rate. RPA has been used to define the occurrence of acceleration demanding large amounts of power in certain driving distance and shown to be a significant affecting parameter for real-world emission rate. 40 driving patterns have been developed with fixed driving parameters to investigate independent effect of RPA. For the same values of average vehicle speed and power, the trend in carbon dioxide emission rate and fuel consumption with respect to RPA is very clear. Emission rate of nitrogen oxide and particulate matter also increase with respect to RPA, but the trend is less clear. Carbon dioxide emission from diesel vehicle appear to be more affected by high accelerations compared to that from gasoline vehicle because of high intake air restriction during acceleration caused by turbocharger and intercooler. The results have implications for the possible reduction of environmental effects through better traffic planning and management, driver education and car design.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.190-199
• /
• 2001

In this paper, we have researched the depth of focus (DOF) and cutoff intensity of the $0.1{\mu}m$rule dense line'||'&'||'space pattern according to the various off-axis illumination (OAl) conditions in the optical system of 0.65 NA using ArF excimer laser (193 nm). We have also studied the variation of the DOF and cutoff intensity according to the sub-resolution pattern (hammer head type) size for optical proximity correction (OPC) applied to the capacitor pattern and the various OAl conditions in the same optical system. As a result, it is revealed that the cross type quadrupole or annular illumination is preferred to the conventional X type quadrupole for printing the $0.1{\mu}m$ rule dense pattern. Also, we can investigate the optimal illumination condition and the size of ope sub-resolution pattern to keep a consistent DGF and cutoff intensity trends.

• Journal of Society of Preventive Korean Medicine
• /
• v.18 no.3
• /
• pp.105-115
• /
• 2014

Objective : Traditional medicine (TM) has been playing its role in national healthcare system and it is taken as complementary and alternative medicine (CAM) from the viewpoint of modern Western medicine. In the UK, not a few practitioners of Traditional Chinese Medicine (TCM) are working as CAM practitioners using herbal medicine and acupuncture therapy. Cases of dispute in the TCM practice are not rare these days because patients who take TCM service are increasing by year. Method : In the UK, dispute cases of the Traditional Medicine of East Asia can be found these days, however, it is hard to find a reported court case. A medical dispute case of TCM will be analysed to see the legal management and the resolving principle in the alternative medicine practice with some cases of Korean Medicine (KM) being discussed. Results : The usual pattern of clinical negligence can be discussed from the points of a duty of care, breach of that duty by negligence, and the harm to the patient from that breach of duty. The judge followed this procedure In this case to discuss the claims. The department of health proposed to introduce regulation to provide the reasonable quality in TCM practice, and the governmental system would be essential to regulate both the TCM practice and practitioners. Conclusion : The dispute case of traditional Chinese herbal medicine (TCHM) practice is important for the clinical negligence in TCHM practice. Judging the negligence of a TCHM practitioner involves the conventional negligence principle in tort law, and the TCHM practitioners are required to keep up with the up-to-date information on the related medical specialty. The reasoning is almost the same as that shown in the court case of Korea. The TCHM practice in the UK needs to be under the regulation by the government. The standard of care we expect of a TCHM practitioner is a further matter to discuss from the healthcare and social viewpoints.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.182-186
• /
• 2011

A poling method using multiple negative voltage was introduced to fabricate periodically poled lithium niobate (PPLN) devices with quasi-phase matching (QPM) period of $12.9\;{\mu}m$ by utilizing an real-time visualization system. We also performed variation of the electric field during the poling. Two different conventionally used poling method, negative and positive single pulses, were used and the poling quality compared through microscopic images and far-field diffraction pattern analysis. Etched images on the +z and -z surfaces of PPLN showed that negative multiple pulse poling presented the highest periodicity in domain structures among the three methods. Duty ratio and its standard deviation were measured by analyzing far-field diffraction patterns. The newly introduced method of negative multiple pulse poling had duty ratio of 0.42 which was close to the ideal value of 0.50 and standard deviation of 0.020 that was about 3 times smaller than that of the other conventional methods.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.2
• /
• pp.121-128
• /
• 2024

In this study, a dynamic simulation model of a heavy-duty truck, equipped with a fuel cell power-train, has been developed and the dynamic behavior of the fuel cell stack has bee investigated using. Output change simulations were performed according to several drive cycle load change of a fuel cell truck. Mathworks' Simulink and Simscape program were used to develop the model. The model is comprised of fuel cell power train, power converter system and truck vehicle part. The vehicle runs at targeted speed of the truck, which is set as the load of the system. The dynamic behavior of the fuel cell stack according to the weight difference were analyzed, and based on this, the dynamic characteristics of the fuel cell output power and battery state with simple load was analyzed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.71-78
• /
• 2008

The sensor node's performance is expected to be improved and the price will be largely decreased. As USN-applied field is expanded, multiple application services are expected to be provided through one USN soon. Multiple applications be required a periodic data reporting, consecutive information monitoring, event-driven data and query-based data as the data pattern that USN is delivered. Accordingly, the mechanism which can assure QoS according to each data characteristic is required. In this paper, A proposed protocol apply the duty cycle of S-MAC protocol variably and flexible according QoS level. This method largely reduces the delay on the delay-sensitive traffic, while keeping the energy efficiency.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.25-29
• /
• 1991

In the field of prosthesis arm control, tile pattern classification of the EMG signal is a required basis process and also the estimation of force from col looted EMG data is another necessary duty. But unfortunately, what we've got is not real force but an EMG signal which contains the information of force. This is the reason why he estimate the force from the EMG data. In this paper, when we handle the EMG signal to estimate the force, spatial prewhitening process is applied from which the spatial correlation between the channels are removed. And after the orthogonal transformation, which is used in the force estimation process the transformed signal is inputed into the probabilistic model for pattern classification. To verify the different results of the multiple channels, SNR(signal to noire ratio) function is introduced.

• Journal of Korean Physical Therapy Science
• /
• v.6 no.3
• /
• pp.83-89
• /
• 1999

We are approaches various painful diseases in clinic. Although same disease, it is different to acute, subacute and chronic stage of disease. Therefore, to understanding of tissue anatomy, pathology and physiology is necessary to under-standing pattern of diseases. It is duty work that choice of hot or ice, electrotherapy, choice of adaptable frequency and mathod of exercise therapy etc. During treatment it is important method to choose to treat the client. As treating the client by exercising or treating when the client is resting and seeing if anything else is a problem etc. So what I have approached some of the treatment that a physical therapist could miss during treatment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.315-316
• /
• 2002

Electrochemical discharge machining is a very recent technique for non-conducting materials such as ceramics and glasses. ECDM is conducted in the NaOH solution and the cathode electrode is separated from the solution by $H_2$ gas bubble. Then the discharge is appeared and the non-conductive material is removed by spark and some chemical reactions. In the ECDM technology, the $H_2$ bubble control is the most important factor to stabilize the discharging condition. In this paper, we proposed the discharge peak monitoring/ discharging duty feedback algorithms for the discharge stabilization and the feasibility of this algorithm is verified by various pattern machining in the constant preload conditions for the cathode electrode.