• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.304-309
• /
• 1998

In recent truck industry, ride quality improvement as well as payload capacity is a very important subject. In order to achieve this goal, it is necessary to study several sub-systems (powertrain, suspension, engine mount, exhaust, etc) of truck which are major components of vehicle. In this research, torsional vibration reduction method of 4$\times$2 truck powertrain is demonstrated by using computer simulation and experiment. First, truck powertrain is modeled as a vibration system and validity of developed model is verified by comparing free vibration results with experiment results. Second, Most key parameters which influence torsional resonance are examined utilizing mode analysis. Finally, frequency responses of truck powertrain are obtained and reduction counterplans of torsional vibration are suggested.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.227-240
• /
• 2020

This paper proposes a novel CTC technology, CB-sense. The CB-sense guarantees a dedicated period for the CTC that results in low duty cycle of the receiver device. In addition, it send a lot of information explosively during the dedicated CTC period. Thus, it can achieve high throughput. The CB-sense uses Clear to Send (CTS) packets to transmit information bits to the heterogeneous wireless technologies. The CTS packets block the neighboring node transmissions, so it reduces co-channel interference. In experiment results, CB-sense represents 20 times more throughput than FreeBee and below 5% symbol error rate in the interference environment.

• Elastomers and Composites
• /
• v.31 no.3
• /
• pp.175-182
• /
• 1996

Polymer latices, prepared from the emulsion polymerization of vinyl monomer compounds, are widely used for many industrial applications. Included among these are uses in paints, adhesives, flocculants, and heavy-duty plastics as well as their original use in synthetic rubber compounds. The emulsion polymerization process with chemical initiator has chemical disadvantage such as removal of initiator which was left after polymerization. In this study, polystyrene latex was prepared by using ultrasonic irradiation which generate the free radical, and then it was analyzed by GPC. Reaction temperature hardly have an effect on average molecular weight. Average molecular weight is increased by increasing amount of surfactant, i.e. SDS, but polydispersity is decreased. After 90 minutes of reaction time, increase and decrease of average molecular weight Is repeated. It is proposed that monodisperse polymer is obtained by controlling ultrasonic irradiation time and surfactant concentration.

• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.84-91
• /
• 1997

The metal transfer phenomenon of the pulsed-GMAW is simulated by formulating the electromagnetic force incorporated with the Volume of Fluid algorithm. The free surface profiles, pressure and velocity distributions within the drop are computed numerically. Axial velocity and acceleration generated during peak current period are found to have a significant effect on drop detachment. Therefore, the accelerated inertia force becomes one of important factors affecting metal transfer in the pulsed-GMAW. When the pulse current parameters are selected properly, the molten drop is detached just after current pulse, and the operating range of the pulsing frequency increases with higher peak current and duty cycle. Calculated operating ranges show reasonably good agreements with the available experimental data.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.7
• /
• pp.653-667
• /
• 1990

Superconductor is consolidated, for required current capacity, with proper numbers of basic strands which are multifilamentary composites. Althouth superconductors are perfectly loss-free under DC conditions of current and field, AC losses occur under time-varying condition of the current and field. The AC losses are a controllable inherent characteristics of supercondectors. The AC losses dependent on the changing rate of current and field can be reduced by reducing the filament diameter. On the other hand, finer filament results in manufacturing cost increase. Therefore, in this paper optimization technique of superconductor for SMES is proposed from the viewpoint of AC loss reduction and manufacturing cost increase. The case study shows that the technique can be effectively used for the design of superconductor for SMES, appreciating the influence of various parameters related to superconductor itself and operating condition of SMES. As a result of the case study, it is confirmed that the technique is more effective for the design of superconductor for SMES for electric power power system stabilization rather then SMES for energy storage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.195-201
• /
• 1998

This study aims at the optimal design of rotors and the development of screw type Supercharger of CNG-fueled engine for commercial vehicle. Based on the new rotor profile, an advanced oil free type Supercharger has been developed, which can achieve higher adiabatic efficiency and lower manufacturing cost. The performance test of screw type Supercharger has achieved high volumetric efficiency and the durability on the bench of performance test has also been established in the compact body.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.1
• /
• pp.123-140
• /
• 2011

In this paper, we propose an Energy Efficient Media Access Control (EE-MAC) protocol for wireless sensor networks. The proposed scheme is designed to save power consumption and guarantee quality-of-service for real-time traffic. EE-MAC uses the superframe structure which is bounded by the transmission of a beacon frame and can have an active and an inactive portion. The active period is divided into the contention free period (CFP) for real-time traffic transmission and the contention access period (CAP) for non-real-time traffic transmission. We propose the exclusively allocated backoff scheme which assigns a unique backoff time value to each real-time node based on bandwidth allocation and admission control. This scheme can avoid collision between real-time nodes by controlling distributed fashion and take effect a statistical time division multiple access. We also propose the algorithm to change the duty cycle adaptively according to channel utilization of media depending on network traffic load. This algorithm can prolong network lifetime by reducing the amount of energy wasted on idle listening.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.139-149
• /
• 1999

This study was performed to investigate components of organic solvents and present statues of environmental measurements with official records of working environmental measurements of 4,181 workplaces in 3,280 workshops used airborne organic solvents. 1. The mean working hour of 4,181 workplace producing airborne organic solvents in 3,280 workshops was 437±28.7min, but the mean sampling time for measurement of airborne organic solvents was identified to be 254±28.8min. In 73.0% of 4,181 samples the sampling frequencys were Full-period, single sample measurement. 2. The total 54 components of organic solvents were measured in total airborne samples of 4,181 workplace in 3,280 workshops in both of first and second half-year. These were divided into 38 components, Group 1 substances (5 components), Group 2 substances (31 components) and Group 3 substances (2 components), regulated by the Industrial Safety and Health Law, and other 16 components without legal duty of working environment measurement. The most common component in each half-year was Toluene (84.8%, 88.2%), which was followed by Xylene (464.4%, 51.7%), Methyl ethyl ketone (31.1%, 34.4%), n-Hexane (22.7%, 27.8%) and Benzene (20.4%, 21.5%) in frequency. Of legal duty free components, Ethyl benzen, Trimethyl benzene and Pentane were frequently detected. In conclusion, these results show that the present legal classification system of organic solvents needs to revise. Also these results suggest that it must be necessary to analyze the component of airborne organic solvents mixture and to evaluate their effects on workers' health for the effective management of working environment in workshops treating with organic solvents.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Journal of the Korean Home Economics Association
• /
• v.40 no.5
• /
• pp.195-210
• /
• 2002

The purpose of this study were to find out the difference of needs of caring between care-givers and non care-givers, and to suggest the way of lessening vigorous task of care-givers for the elderly with dementia. Data were collected from 130 nationwide respondents intentionally divided into two groups; care-givers and non care-givers in the middle aged with middle and upper income. Collected data were analyzed by frequency, percentage, t-test using SPSS package. Since the result of survey, unexpectedly, showed no difference between two groups, it could be explained as that these two groups commonly had same needs of caring for the elderly with dementia. Major findings were as follow; 1) Most Koreans stiff thought family should be the main care-giver for the elderly with dementia prior to nation or society. 2) Responsibility of caring for the elderly with dementia would be better to be shared with children instead of focusing to a child. 3) They thought ideal residential facilities for the elderly with dementia were small-scale professional dementia facility(group home) rather than home or general elderly housing. 4) Professional dementia care hospital was one of the most needed facilities for the elderly with dementia, followed by short-stay and dar-care center. 5) It was revealed care-giving task was vigorous showing that most care-givers spent 1-5 hours a day for caring, while 13% of respondents spent 11-24 hours a duty. 6) 90% of care-givers took the responsibility of main care-giver because of duty of offsprings or spouses, and wanted to be free from their current circumstances. From the result of this survey researchers would like to suggest the establishment of diverse facilities for professional dementia care to lessen the caring burden for the elderly with dementia: group home, chronic hospital, short-stay, day-care center. Financial support from the government for the housing renovation of the caring families should be considered seriously afterward. It is needed to give the opportunity to select proper paid dementia care facilities according to their income and situation of household.