• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.6-11
• /
• 2004

CNG buses were introduced in 2002 to reduce air pollution to the big cities. The durability and safety evaluation were performed for the NGV-2 type cylinders taken from two buses after 30 months of running. No external damage and no internal corrosion was observed on the container surfaces. Defect exceeding the allowable limit was not found in the UT test. Permanent volume expansion was about 1.2% which is much smaller than the required design limit. Cycling test showed no failure after 11,250cycles and burst pressures were still above the maximum design pressure. Both the longitudinal and circumferential failure mode were observed, where both the fracture strengths were far above the design limit. This study showed the present CNG fuel cylinders were safe enough for further usage.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.268-268
• /
• 2017

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.487-490
• /
• 2005

In this study, for the establishment of the performance evaluation methods and the quality control standards of durability recovery method, the data of indoor durability test and the data of the long term exposure test under the coast are accumulated and analyzed. As a result of the indoor test, durability of repair material was more superior to that of plain concrete, but as a result of investigating and evaluating exposure test at 30 month of exposure age under the coastal environment, the difference in electric potential and the reinforcement corrosion at place replaced with repair material are found.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.8 s.239
• /
• pp.1153-1160
• /
• 2005

Many methods of spot weld modeling have been developed to increase efficiency and guarantee the robustness fer the CAE analysis. In this research they are introduced and the performance is compared in a viewpoint of stiffness and durability. For evaluating the performance a multi-spot welded specimen as well as two single welded specimen is used. The results show that the CWELD element considering 'patch to patch' is stiffer than other modeling methods in stiffness and more conservative in durability. It also offers simple modeling and since it is much easier to maintain the orrhogonality of the BAR element expressing a nugget, we can obtain more exact reaction forces and moments in a nugget. Therefore the CWELD element is the most excellent in the assessment of durability.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.168-172
• /
• 2012

Control arm is the structural component that pivots on two places. One end of the control arm is attached to the body frame and the other end is attached to the steering knuckle. The former research proposed the structural design by applying optimization technique with aluminum alloy. This study suggests a durability test method on the developed upper control arm to validate the analysis results. The durability analysis results of the developed control arm by using MSC Fatigue is confirmed to be close to infinite life. The weak model of developed control arm which occurs to finite life is made to perform the durability test and the zig design is developed in this process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.213-220
• /
• 1999

The life data analysis of the system and component are useful to describe the result of reliability test in product life to satisfy customer's growing need and to change test specifications or design criteria by life data analysis. And vehicle durability tesr occurred market environment. In this study, a statistical analysis for the wear life of brake pad linings helped perform correlation procedure between vehicle durability test and market. B-life values of the brake pad wear life data from both vehicle durability test and marker usage were compared to determine acceleration of the test by the Weibull, normal and log-normal distribution. The acceleration coefficient of the vehicle durability test can access to evaluate design criteria of product and test specification.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.147-150
• /
• 2007

As recent buildings often use low-quality concrete materials, are constructed defectively, and are put in extreme environmental conditions, many of them show the shortening of life resulting from the corrosion of reinforcing rods by salt damage, carbonization, freezing and thawing, cracking. This in turn raises the cost of repair and maintenance, so it is required to extend the life of structures through enhancing the durability of concrete. In response to the demand, researches on high-durability concrete are being made actively focused on the maximum water-cement ratio, the maximum unit quantity, the minimum cover thickness, the addition of mineral admixtures, etc. With this background, the present study examined the basic physical properties of concrete containing admixtures for enhancing the durability of concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.65-67
• /
• 2014

There are many elastomeric joint sealant applications in construction such as structural glazing, weatherproofing and insulating glass fabrication etc. Each sealant joints require unique durability functions to perform well through building life cycle. Elastomeric joints in bathroom and kitchen is one of areas which require durable sealing. In this application, anti fungal durability is proprietary function of sealant during building life cycle. Premature failure of anti fungus resistance of sealant is putting big stresses to general contractor as well as the inhabitants due to costly rework and poor sanitation. Accordingly, when chemists design a product, they must take into account various parameters not only formulation components also test conditions in order to have long term fungal durability. This paper reviews several biocide options with various industry standards for fungus resistance performance to suggest making new test method for construction sealant industry.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.614-620
• /
• 2009

A fuel tank of a vehicle is an important part due to its flammable contents ant its importance during crash conditions. Therefore, the fuel tank's design should be assessed for durability and robustness to ensure safety during the early development phase. Previously, evaluation for the durability was done by testing in physical driving conditions which could only be done after the completion of the vehicle. Computation simulation is a more effective method to evaluate the strength and durability of the fuel tank during the early stage. In this paper, two outstanding computational simulation methods are studied. One evaluates PV cycle fatigue due to build up pressure in the fuel tank and the other evaluates the PSD vibration fatigue from modal characteristics. The results show that computational methods agree with physical tests and are thus suitable to analyze the strength and durability of the fuel tank at early development phase.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.101-110
• /
• 2013

PURPOSES : The purpose of this study is to evaluate the durability of ternary blended concrete mixtures adding ultra fine admixture. METHODS : From the literature review, crack was considered as the main distress failure criterion on concrete bridge deck pavement. To reduce the initial crack development due to drying shrinkage, CSA expansion agent and shrink reduction agent were used to ternary blended concrete mixtures as a admixture. Laboratory tests including chloride ion penetration test, surface scaling test, rapid freeze & thaw resistance test, non restrained drying shrinkage and restrained drying shrinkage test were conducted to verify the durability of ternary blended concrete mixtures. RESULTS : Based on the test results, proposed mixtures were verified as high qualified durable materials. Expecially initial drying shrinkage crack was not occurred in ternary blended concrete mixtures with CSA expansion agent. CONCLUSIONS : It is concluded that the durability of proposed ternary blend concrete mixture was acceptable to apply for the concrete bridge deck pavement.