• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.27-33
• /
• 2008

This paper designs Shared Memory on the Dual Core system so that it operates a general System V IPC on the Linux O.S. Shared Memory is the technique that many processes can access to identical memory area. We treat Shared Memory which is SVR in a kernel step. We design a share memory facility of Linux operating system on the Dual Core System. In this paper the suggesting of share memory facility design plan in Dual Core system is enhance the performance in existing an unity processor system as a dual core practical use. We attemp a performance enhance in each CPU for each process which uses a share memory.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1448-1455
• /
• 2008

This paper designs Shared Memory on the Dual Core system so that it operates a general System V IPC on the Linux O.S. Shared Memory is the technique that many processes can access to identical memory area. We treat Shared Memory in this paper among big two branches of Shared Memory which are SVR in a kernel step format. We design a share memory facility of Linux operating system on the Dual Core System. In this paper the suggesting design plan of share memory facility in Dual Core system is enhancing the performance in existing unity processor system as a dual core practical use. We attempt a performance enhance in each CPU for each process which uses a share memory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.57-63
• /
• 1991

In this paper, propagation characteristics of W-type single mode fiber with dual shape core is investigeted theoretically. Design parameters of DSC(dual shape core) W-type single mode fiber with very low dispersion over a wide wavelength range are computed using scalar approximation. The results have larger core radius and stronger confinement for mode field distribution in core than conventional W-type fiber with single shape core.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.191-199
• /
• 2004

The purposes of this study were to estimate the material properties of the recently developed domestic composite resins for core filling material (Chemical, Dual A, Dual B；Vericom, Korea) and to compare them with other marketed foreign products (CorePaste, Den-Mat, USA；Ti-Core, Essential Dental Systems, USA；Support. SCI-Pharm. USA). Six assessments were made：working time. setting time. depth of polymerization. flexural strength. bonding strength. and marginal leakage. All items were compared to ISO standards. All domestic products satisfied the minimum requirements from ISO standards (working time：above 90 seconds. setting time：within 5 minutes). and showed significantly higher flexural strength than Core Paste. Dual A and B could. especially. reduce the setting time to 60 seconds when cured with $600mW/cm^2$ light intensity. All experimental materials showed 6 mm depth of polymerization. Bond strengths of Ti-Core and Dual B materials were significantly higher than the other materials. Furthermore. three domestic products and Ti-Core could reduce the microleakage effectively.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}$= 0.05. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37^{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}=0.05$. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.543-544
• /
• 2009

본 논문은 Linux에서 사용되는 Shared Memory는 동일한 메모리 영역에 여러 개의 프로세스가 접근할 수 있도록 해 주는 기술이다. 본 논문에서는 Shared Memory의 큰 두 갈래 중 커널 단계에서 처리 되는 SVR(System V Release) 형식의 Shared Memory를 다룬다. 본 논문에서는 리눅스 운영체제의 공유 메모리 기능을 Dual Core 시스템에서 동작하도록 구현한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.6
• /
• pp.573-579
• /
• 2015

A control algorithm of thyristor dual converter power system is proposed in this study for a railway power substation. The thyristor dual converter can use regenerative power without an additional system using control algorithm. An autonomous voltage and mode change method is also proposed to provide uninterrupted power to the railway. A 10 kW reduced model of the thyristor dual converter power system is built and tested to verify the validity of the proposed control algorithm.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.6
• /
• pp.273-282
• /
• 2015

In this study, shaking table test has been carried out for the dual frame passive control system for seismic performance verification of the proposed system. The proposed system was separated into two independent frameworks that are strength resistant core and frame structure by connecting to the damper. Moreover, the seismic performance improvement of the proposed system has been verified by comparing and analyzing the experimental results of the proposed system with an existing core system. As a result of the shaking table test, acceleration and displacement responses of dual-frame vibration control system are decreased than those of the existing strength resistant type core system. In the case of the core system, while the damage was concentrated on the column of first floor, the damage of the dual system was dispersed in each layer. The damage also was concentrated on the damper, almost no damage occurs to the structural members. It has been emphasized that installed dampers in the proposed dual system reduce the input energy of whole structure by absorbing seismic input energy, which leads overall system damage to be reduced.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.683-686
• /
• 2023

In this paper, we designed a Delayed Dual Core Lock-Step (D-DCLS) processor where two cores operate same instructions with delay and the result is compared to mitigate soft errors and common mode failures in automotive electronic systems. Because D-DCLS does not know which core an error occurred in, each core must be recovered to the point before the error occurred, but complex hardware modifications are required to return all intermediate values on the pipeline stage. In this paper, in order for easy hardware implementation, all register values are saved to a buffer whenever a branch instruction is executed. When an error is detected, the saved register values are automatically restored, and then 'BX LR' instruction is executed to return to the last branch point. The proposed D-DCLS processor was designed using Verilog HDL and was confirmed to continue normal operation after automatically recovering error.