Proceedings of the KACD Conference (대한치과보존학회:학술대회논문집)
- 2008.05a
- /
- Pages.169-176
- /
- 2008
Polymerization of dual cured composites by different thickness
두께에 따른 이중 중합형 복합레진의 중합
- Kim, Yun-Ju (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University) ;
- Jin, Myoung-Uk (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University) ;
- Kim, Sung-Kyo (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University) ;
- Kwon, Tae-Yub (Department of Dental Biomaterials, School of Dentistry, Institute for Biomaterials Research & Development, Kyungpook National University) ;
- Kim, Young-Kyung (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University)
- 김윤주 (경북대학교 치의학전문대학원 치과보존학교실) ;
- 진명욱 (경북대학교 치의학전문대학원 치과보존학교실) ;
- 김성교 (경북대학교 치의학전문대학원 치과보존학교실) ;
- 권태엽 (경북대학교 치의학전문대학원 치과생체재료학교실) ;
- 김영경 (경북대학교 치의학전문대학원 치과보존학교실)
- Published : 2008.05.30
Abstract
The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at
본 연구는 이중 중합형 복합레진에서 재료의 두께, 충전방법 및 중합방법에 따른 중합도를 미세경도 시험을 이용하여 측정하고자 하였다. 이중 중합형 복합레진으로는 MultiCore Flow (Ivovlar Vivadent AG, Schaan, Liechtenstein)와 Bis-Core (Bisco Inc. Schaumburg IL, USA)를 사용하였다. 시편의 제작은 각각 두께가 2 (단일충전). 4 (단일충전), 6 (단일충전과 적층충전), 8 (단일충전과 적층충전) mm의 Teflon mold에 재료를 주입한 다음 할로겐 광중합기 (Optilux 501 Kerr, Danbury, USA)를 사용하여 광중합하거나 암실에서 30분 동안 기다린 후(자가 중합) Teflon mold에서 제거하였다. 제거한 시편은
Keywords