• Advances in aircraft and spacecraft science
• /
• v.5 no.4
• /
• pp.431-444
• /
• 2018

Numerical simulations have been conducted to study the unstart/restart characteristics of an over-under turbine-based combined-cycle propulsion system (TBCC) inlet during the inlet transition phase. A dual-solution area exists according to the Kantrowitz theory, in which the inlet states may be different even with the same input parameters. The entire transition process was divided into five stages and the unstart/restart hysteresis loop for each stage was also obtained. These loops construct a hysteresis surface which separates the operating space of the engine into three parts: in which a) inlet can maintain a started state; b) inlet keeps an unstarted state; c) inlet state depends on its initial state. During the transition, the operation of the engine follows a certain order with different backpressures and splitter angles, namely control route, which may result in disparate inlet states. Nine control routes with different backpressures and transition stages were designed to illuminate the route-dependent behavior of the inlet. The control routes operating towards the unstart boundary can make the inlet transit from a started state into an unstarted one. But operating backward the same route cannot make the inlet restart, additional effort should be made.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.367-371
• /
• 2007

Large capacity UPS and emergency generators are being installed and operated at the specific target of important electric facilities that need uninterruptible power supply by the method of countermeasure against power failure for the less reliable incoming power method. Recently, CTTS (Closed Transition Transfer Switch) is being used as uninterruptible power transfer switch at the Common sources of electricity, generator and multiple generators. In this paper, construction plans for uninterruptible power supply system has been suggested in which CTTS has been applied to the secondary of incoming power generator for reliable common dual system method. By briefing the construction of incoming power facilities, large capacity UPS, emergency generator installation space and investment saving effects can be achieved.

• Journal of Families and Better Life
• /
• v.27 no.6
• /
• pp.189-201
• /
• 2009

The purpose of this study was to explore the potential development of a communal child care project that would lead towards a more family friendly community. By reviewing the case of the Daejeon Health Family Support Center, the study revealed that many child care providers showed an interest in communal child care. But the providers also had problems seeking both partners for communal child care and a communal place to gather. The Daejeon Health Family Support Center had several elements of strength in communal child care project. First, they provided educational programs for care providers to promote the professional knowledge and skills needed for child care and education. The participants' responses to the program were satisfactory, in that they showed the relative effectiveness of such programs in improving attitudes towards Pumasi, along with customized services and other programs provided by the Healthy Family Support Center. In addition, the availability of professional child care services in the attached gym, the Saturday classes for dual earner families, and the prompt response by the center to requests that more space be provided, also contributed to the success of Pumasi program.

• Journal of the Korean Mathematical Society
• /
• v.45 no.4
• /
• pp.1089-1100
• /
• 2008

For a pointed space X, the subgroups of self-homotopy equivalences $Aut_{\sharp}_N(X)$, $Aut_{\Omega}(X)$, $Aut_*(X)$ and $Aut_{\Sigma}(X)$ are considered, where $Aut_{\sharp}_N(X)$ is the group of all self-homotopy classes f of X such that $f_{\sharp}=id\;:\;{\pi_i}(X){\rightarrow}{\pi_i}(X)$ for all $i{\leq}N{\leq}{\infty}$, $Aut_{\Omega}(X)$ is the group of all the above f such that ${\Omega}f=id;\;Aut_*(X)$ is the group of all self-homotopy classes g of X such that $g_*=id\;:\;H_i(X){\rightarrow}H_i(X)$ for all $i{\leq}{\infty}$, $Aut_{\Sigma}(X)$ is the group of all the above g such that ${\Sigma}g=id$. We will prove that $Aut_{\Omega}(X_1{\times}\cdots{\times}X_n)$ has two factorizations similar to those of $Aut_{\sharp}_N(X_1{\times}\cdots{\times}\;X_n)$ in reference [10], and that $Aut_{\Sigma}(X_1{\vee}\cdots{\vee}X_n)$, $Aut_*(X_1{\vee}\cdots{\vee}X_n)$ also have factorizations being dual to the former two cases respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.611-618
• /
• 2006

Recently, cryogenic butterfly valves for LNG carriers are actively developed by ship equipment companies. The dual core structure unlike usual butterfly valve has both translation and gyration motions of the disk of the valve assembly. Especially, the ship equipment companies can not have overcome 2D design method; in addition, even though 2 years of development has passed, the drawing cannot be secured. In this research, for the cryogenic butterfly valves and the product design, 3D design method was introduced and DMU(Digital Mockup) was applied to complement the problems in 2D design and investigate application possibility of 3D design method.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.4 no.2
• /
• pp.26-34
• /
• 2004

Our country did not illustrate and reverse by a city planning law department construction Buddhist priest's robe dual setup the urban setting to be regulated, it came. The city planning law as the high position system of space planning mainly provides the use and a size of the land, the construction law the detail contents of site undergarment concrete location and the form back is provided and of course, regarding the structure which relates with the designation of concrete building use in him and the immediacy back. These two laws are come by a trade name complement and a function sharing role in order for the affirmative development of the city to become accomplished, being used. To necessity of District unit plan the general causal government employee all it is sympathizing, it relates it goes to extremes and with the maintenance of endurance environment and many portion with charge Sikkim also the fact that it is the criticism which relativy is negative in duty of administrative origination is fact in the people. But realization of plan hazard the execution of the public section which stands will be important, it will reach and the public section execution plan of the autonomous nine dimension for must be prepared. The next research that the individual globe plan and development actual condition actual proof and the research which it analyzes system is necessary with base, sees the general operation evaluation of Seoul District unit plan.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.3
• /
• pp.463-469
• /
• 1996

Sonoring is caused by the repeated obstructions of versatile upper air way structure during sleep and is known as a kind of disease entity varing from simple snoring to obstructive sleep apnea syndrome(OSAS) which can cause serious cardiopulmonary complications due to its hypoxic pathophysiology. It has been reported that over 30% of middle-aged person have the problems of snoring and its accompanied symptomes and signs. Cephalometric measurements, frequently used to measure sella-nasion-subspinale(SNA) and sella-nasion-supramentale(SNB) angles, can provide the informations about the posterior airway space(PAS), the mandibular plane(MP) and the position of hyoid bone. These informations are useful in determining the therapeutic modalities of the snoring and OSAS patients. However, with conventional routine upright position, it does not represent the actual images of obstructive mechanism during sleep but only show the images of awaken normal upper airway anatomy. Therefore we have taken dual images of a routine upright lateral and a supine cephalometric view to compare both.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.55-58
• /
• 2009

Traditional pile-buildings in Southeast Asia has high utility. Their floors are lifted above the ground to stave off humidity in the house, increase the amenity and hygienic condition, fend off fierce animals or harmful animals like rat, and protect the house from being submerged in flood waters. Such traditional pile-buildings have Austronesian saddle-backed roof commonly, and are built through various techniques such as joining and mortising, without use of nails. The roof has a considerably large proportional appearance, and for this formal characteristics, the roof is symbolized as boat on occasions. The roof has dual structures or is lifted in some cases to facilitate the ventilation, and the wall is formed to maximize the ventilation. This housing types the hierarchy of foundation, housing space, and roof, which implies religious symbolism that human is above animal and God is above human. However, housing types in Southeast Asia have very different detailed form and culture, depending on the ethnic and religious characteristics. As explained above, this study examines the common aspects and diversity based on the form and culture of traditional housing of Southeast Asia and provides useful basic academic data.

• Journal of Energy Engineering
• /
• v.27 no.3
• /
• pp.28-35
• /
• 2018

Guidelines and institutional support for buildings are being promoted around the world as measures for environmental pollution and energy conservation. In Korea, standards are prepared according to the energy saving design standards of new buildings as amended in 2013.09.01 and the zero energy building for new buildings mandatory process is being prepared from the recommendations. Nevertheless, the government's binding power on smaller buildings is insufficient. Energy savings were analyzed for the recently constructed office buildings (application of external insulation technique) and propose a dual envelope techniques were proposed for energy reduction.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.43-48
• /
• 2011

Filler loading at thick stock was carried out in order to verify if the dual addition of filler can be used as a means to reduce the detrimental effects of filler on the strength properties of paper. PCC was added to 3.5% pulp slurry blended with HwBKP, BCTMP and SwBKP. Cationic starch was used as a fixing agent. The mixture of PCC and pulp was stirred for 5, 10 and 20min. at 1,000 rpm. The remaining PCC was washed out before handsheet making. PCC particles were flocculated and fixed on the pulp fiber and/or space between fibers. It is expected that the flocculation and inclusion of PCC can be helpful to improve the strength properties of paper due to the reduction of detrimental effect in fiber bonding. The distinct tendency in PCC flocculation and fixing on pulp fiber was not observed by the change of cationic starch dosage and treatment time.