• 전력전자학회논문지
• /
• 제15권6호
• /
• pp.498-505
• /
• 2010

In-Wheel System은 고성능의 전기모터를 Wheel에 직접 장착하여 파워트레인 요소를 모두 제거함으로써 차량시스템의 효율을 높인 시스템이다. 추후 친환경 차량에 적용할 수 있는 신개념의 플랫폼을 제공할 수 있는 고효율, 고성능 차량 시스템이기에 다양한 분야에 적용되고 있다. 이러한 시스템의 급증은 우리 생활의 안전과 직결되므로 개발단계에서 부품의 신뢰성을 확인하고 인증하여야 한다. 신뢰성이란 "부품이나 시스템이 주어진 환경에서 고장 없이 일정기간 동안 요구기능을 수행하는 특성"이다. 따라서 본 논문에서는 In-Wheel System의 핵심 부품인 In-Wheel Motor를 신뢰성 평가 중 하나인 내구 수명에 대한 검증 방안을 In-Wheel Motor의 운전 조건으로부터 가감속 토크 및 실효토크를 계산해서 이를 바탕으로 가속수명시험을 위한 속도 패턴을 제안하여 시험시간을 단축하고, 또한 In-Wheel Motor의 수명 신뢰성을 검증한다.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.851-860
• /
• 2020

인구 고령화와 건강 복지에 대한 사회적 관심이 높아지면서 재활복지기를 포함한 실버 및 헬스케어 산업과 관련한 연구들이 활발하게 진행되고 있다. 본 연구에서는 기존에 1차적으로 설계·제작되었던 이·승강 전동휠체어를 사용자 측면에서 보다 더 안전성과 편의성을 갖도록 개선하고자 하였다. 사용자 체형을 고려한 헤드레스트 높이조절 기능의 시트 디자인, 사용성 증대를 위한 암레스트의 길이조절 및 95° 회전 기능, 사용자 탑승 편의성을 위한 바닥까지의 시트하강 및 운행 시 승강할 수 있는 기능, 캐스터 회전반경 및 안전성 증대를 위한 발판 추가 및 풋레스트 길이 조절 기능, 승·하강 시 흔들림 방지를 위한 프레임 및 승·하강 링크 설계 등을 개선시켰다. 또한 안전주행을 위한 컨트롤러 및 드라이브 부문과 사용자 편의성 측면의 기능들을 추가적으로 설계·제작하였다. 추가 기능을 보완하여 제작된 실내 전동휠체어의 동작 상태를 평가하기 위해 구동 실험을 수행하였다. 연속 주행시간, 회전반경, 승·하강 최대 하중, 최대 승강 높이, 소음레벨, 운행 보조센서 센싱 최소거리, 서버 및 앱 프로그램 상호연동 및 기기호환성, 듀티 사이클 최대 오차율의 성능실험을 수행하였다. 실험 결과, 더 개선하여 설계·제작한 전동휠체어는 시험 목표 값을 달성하였으며, 성공적으로 동작하는 것을 확인할 수 있었다. 향후 연구로는 개선하여 제작된 이·승강 전동휠체어에 대해 사용자 측면에서의 사용성 평가를 수행할 것이다.

• 안보군사학연구
• /
• 통권7호
• /
• pp.271-303
• /
• 2009

"Ubiquitous sensor network" definition is this-Someone attaches electro-magnetic tag everything which needs communication between man to man, man to material and material to material(Ubiquitous). By using attached every electro-magnetic tag, someone detects it's native information as well as environmental information such as temperature, humidity, pollution and infiltration information(Sensor). someone connects it realtime network and manage generated information(Network). 21st century's war is joint combined operation connecting with ground, sea and air smoothly in digitalized war field, and is systematic war provided realtime information from sensor to shooter. So, it needs dramatic development on watch reconnaissance, command and control, pinpoint strike etc. Ubiquitous computing and network technologies are essential in national defense to operate 21st century style war. It is possible to use many parts such as USN combined smart dust and sensor network to protect friend unit as well as to watch enemy's deep area by unmanned reconnaissance, wearable computer upgrading soldier's operational ability and combat power dramatically, RFID which can be used material management as well as on time support. Especially, unmanned watch system using USN is core part to transit network centric military service and to get national defense efficiency which overcome the dilemma of national defense person resource reducing, and upgrade guard quality level, and improve combat power by normalizing guardian's bio rhythm. According to the test result of sensor network unmanned watch system, it needs more effort and time to stabilize because of low USN technology maturity and using maturity. In the future, USN unmanned watch system project must be decided the application scope such as application area and starting point by evaluating technology maturity and using maturity. And when you decide application scope, you must consider not only short period goal as cost reduction, soldier decrease and guard power upgrade but also long period goal as advanced defense ability strength. You must build basic infra in advance such as light cable network, frequency allocation and power facility etc. First of all, it must get budget guarantee and driving force for USN unmanned watch system project related to defense policy. You must forwarded the USN project assuming posses of operation skill as procedure, system, standard, training in advance. Operational skill posses is come from step by step application strategy such as test phase, introduction phase, spread phase, stabilization phase and also repeated test application taking example project.

• 로봇학회논문지
• /
• 제2권4호
• /
• pp.317-326
• /
• 2007

Recently, robotic automation in clinical laboratory becomes of keen interest as a fusion of bio and robotic technology. In this paper, we present a new robotic platform for clinical tests suitable for small or medium sized laboratories using mobile robots. The mobile robot called Mobile Agent is designed as transfer system of blood samples, reagents, microplates, and any instruments. Also, the developed mobile agent can perform diverse tests simultaneously based on its cooperative and distributed ability. The driving circuits for the mobile agent are embedded in the robot, and each mobile agent communicates with other agents by using Bluetooth communication. The RFID system is used to recognize patient information. Also, the magnetic hall sensor is embedded to remove and compensate the cumulated error of locomotion at the bottom of mobile agent. The proposed mobile agent can be easily used for various applications because it is designed to be compatible with general software development tools. The Mobile agents are manufactured, and feasibility of the robot and localization of the agents using magnetic hall sensor are validated by preliminary experiments.

• 한국ITS학회 논문지
• /
• 제15권4호
• /
• pp.153-160
• /
• 2016

영상취득 장치를 이용한 지능화된 감시 장치의 개발 기술 또한 발전하고 있다. 비교적 고속으로 움직이는 객체를 탐지해야 하는 분야에서 무엇보다 중요한 것은 배경영상 갱신에 대한 부하를 효과적으로 줄여서 실시간적으로 갱신할 수 있어야 하는데 현재 범용 컴퓨터 능력으로는 질감 등을 특징으로 추출하는 방법 등은 대부분 연산처리의 부하 때문에 적용상의 한계가 있다. 본 논문에서는 적어도 초당 30프레임의 카메라 영상에서 주행 중인 자동차와 같이 고속으로 움직이는 객체를 탐지하는 응용영역에서 실시간으로 배경 영상을 갱신하는 알고리즘을 제시하고, 실제 입력영상에서 객체 영역을 추출하는 시험을 통해 성능을 분석하였다.

• 대한통합의학회지
• /
• 제4권2호
• /
• pp.13-22
• /
• 2016

Purpose: The purpose of this study was to determine the effects of the swissball exercise in combination with core muscle in beginner golfer. In general, the swiss ball exercise was related in the core muscle ability. Methods: The experiment was conducted with a total of 10 beginner golfer, and they were dicide into two groups: comparison group(n=5) and experimental group(n=5). In this research, the subjects of the comparison group performed the general matte exercise three times a week, for four weeks. The subjects of the experimental group performed the swiss ball exercise in combination with core muscle three times a week, for four weeks. Use the 7-iron and driver were measured head speed and distance of the comparison group and the experimental group, respectively. The collected data were analyzed by using the paired t-test and ANCOVA Results: The results of this study were as follows: 1) Swiss ball exercise in combination with core muscle revealed the significant improvements after corresponding exercise in golf performance capability. 2) Mat exercise was seen less better than the swiss ball exercises. Conclusion: This results suggested that it was improved the golfer shot performance of beginner proposes to see the Swiss combined movement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2224-2229
• /
• 2008

High-Speed train has been developed and it becomes faster and environmental friendly. As trains run faster, Noise of trains is generated mainly by aerodynamic disturbance. Pantograph, both ends of trains, and gaps of coaches which are thought to be aerodynamic noise's factors are primarily studied. Pantograph is a similarly shaped metal framework on the roof of an electric high speed train, transmitting current from an overhead electric catenary wire. Panhead which contacts electric wires directly looks like a bluff strut, goes through flows, is sensitive to external disturbances and is one of the most important factors which decide whole vehicles' driving ability. In this study, aerodynamically robust optimized pantograph panhead shape is designed and then evaluated through subsonic wind tunnel test. To compare these with existing panhead rectangular shapes or circular cylinder shapes, By visualizing strong vortex flow patterns which are main noise sources, characteristics are compared and analyzed

• 대한안전경영과학회지
• /
• 제21권3호
• /
• pp.1-9
• /
• 2019

The Industrial Innovation Movement, based on win-win cooperation with SMEs, is a structure that enables suppliers who have struggled with corporate growth through productivity innovation due to poor manufacturing environment and lack of innovation. To this end, consultants and technical experts will support production innovation activities to improve production methods and improve productivity through process and management consulting. The purpose of this study was to explore the driving factors of the industrial innovation movement to improve the corporate ecosystem by improving the productivity of SMEs using modified IPA. The research results are as follows. First, in order to revitalize the Industrial Innovation Movement, the CEO-related elements of the participating companies should be maintained and strengthened. The motivation, education support, innovation organizational culture, the establishment of an innovation promotion system requires centralization of efforts for improvement. Second, in order to revitalize the Industrial Innovation Movement, the consultant's ability to analyze problems and suggest alternatives should be continuously strengthened. Third, in terms of the Central Promotion Headquarters, it was found that the Industrial Innovation Movement would be successful if the public information, industrial inspection for benchmarking, and provision of various information to support innovation activities were urgently improved.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.222-228
• /
• 2022

As a means to cope with the climate change crisis caused by global warming, automobile manufacturers continue to make efforts to use the driving energy of vehicles as electricity. As a result, parts industry such as battery, motor, and controller are attracting attention. China is often seen in large cities, with electric vehicles such as electric bicycles, electric motorcycles, and small electric vehicles popularized and commercialized, mainly in large cities. However, small electric vehicles are not popular in Korea, which is why the country's topography is high in hills. In order to drive the hilly domestic roads, power performance including vehicle climbing ability should be improved. In order to improve the power performance and the climbing capacity of small electric vehicles, the capacity of the motor should be increased. However, when the performance of the motor is improved, the weight of the motor becomes heavy and the price competitiveness is likely to decrease. In addition, in order to operate a high-performance motor, the power consumption of the battery is rapidly increased, so various problems must be solved. In order to commercialize a small electric vehicle for one or two people who do not emit harmful exhaust gas to the human body in a hilly domestic terrain, it is effective to have a separate transmission system. In this study, we were conducted dynamometer test to produce a continuously variable transmission(CVT) system prototype using a spring that can be applied to a small electric vehicle and to install a CVT system prototype manufactured in a small electric vehicle. The dynamometer test results showed that the maximum speed performance, acceleration performance, and climbing performance were improved.