• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.848-851
• /
• 2007

Recently, as the demand of the information storage devices with large storage capacity such as BD(Blu-ray Disk) and HDTV(high-definition television) is increased, the optical storage devices are also required to have fast data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disk drive should have high flexible mode frequencies for system stability. In this paper, we suggested a moving magnet type actuator having high flexible mode frequency. However, the moving magnet type actuator does not have sufficient driving sensitivities due to the weight of its moving part. To improve driving sensitivities, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, driving sensitivities and flexible mode frequencies were improved by using DOE(Design of Experiments) for magnetic circuit and modifying the lens holder. Consequently, it is confirmed that the designed model is satisfied with the desired specifications.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.353-358
• /
• 2001

Turbo-charging or Super-charging has been used to boost engine power for Gasoline Engine and Diesel Engine came to the world at the beginning of $20^{th}$ century. So far Turbo-Charger has enjoyed a high reputation in the charging filed for its technical advantages such as no demand of operation power from engine and an excellent charging effect in the event of a static operation at mid- and high engine speed. A mechanically driven Super-Charger, however, is now emerging in order to meet demands of the age of speed such as high engine power for a quick change of the driving mode - high engine torque even at low engine speed. Since Super-Charger needs driving power from engine, it cannot improve its relatively higher fuel consumption against that of Turbo-Charger. This negative point is still an obstacle to the wide use of Super-Charger. Super-Charger using Screw-type compressor which has already had a considerable base in air compressor market will fulfill this purpose of improving fuel consumption by minimizing operation power owing to no charging at idling or partially loading driving. This study aims to develop power control concept to achieve this minimization of operation power.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.352-361
• /
• 2017

This paper proposes a design and fabrication of the test equipment that is implemented as a part of the airborne tracking radar inspection under the environment of indoor simulation. This test equipment provides controlling the operation status of airborne tracking radar and replicating the velocity and range information of target by generating a variety of target signal. This is mainly composed of radar operation controller, target signal generator, horn antenna driving devices. Radar operation controller is able to perform the controlling of radar operation mode and monitoring in real time by serial communication. Target signal generator is generated doppler signal and range delayed signal using virtual target of RF-band. Horn antenna driving devices perform a role of target simulating exercise. In the end, the performance is demonstrated using experiment results of test equipment for airborne tracking radar.

• The KIPS Transactions:PartB
• /
• v.12B no.4 s.100
• /
• pp.413-420
• /
• 2005

In this paper, we apply software agents, which use fuzzy logic and make autonomous decisions according to state transitions, to car driving environment. We carry out an experiment on artificial intelligent car driving in terms of real-time reactive agents. Inference techniques for constructing real-time reactive agents consider the settings with max-product inference, n-fuzzy rules, and n-associatives ($A_l,\;B_l),\;{\ldots}(A_n,\;B_n$). Then we perform defuzzification processes, extract a central value, and work out inference processes.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.757-764
• /
• 2022

Recently the car tuning has become a trailblazing and creative culture that expresses the personality of the owner. In this paper, the "Car-Vatar", which is the compound word formed from the words "Car" and "Avatar", has been developed to investigate car tuning on the metaverse engineering platform. The Car-Vatar has been developed as a web-based vehicle dynamic simulation service for providing information about car tuning. That has been focused on investigating diverse vehicular performances, such as acceleration, braking, handling and fuel efficiency, according to the tuning vehicles and tuning parts on the virtual engineering platform. The Car-Vatar platform has provided two major services; one is real-time 3D tuning information system for the dress-up and performance-up tuning parts, the other is diverse vehicle dynamics system for the performance-up tuning parts. To check the validation of the Car-Vatar platform, the comparison between virtual simulation results and driving test results has been discussed on various driving environments.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.247-257
• /
• 2015

This study conducted a questionnaire survey on the real condition of clothing with focus on related to general motorcycle wear and motorcycle jacket targeting a quick service carrier affiliated with a quick service business in Seoul. In addition, this study is aimed at providing basic data on developing the motorcycle jacket, whose motional flexibility, safety and functionality are excellent, exclusively for a quick service carrier by grasping inconveniences and problems and deducting improvements on the basis of the questionnaire survey. This study, on the basis of the questionnaire survey results, grasped the general part related to quick service and motorcycle wear, such as their general matters, whether they were having on the motorcycle wear in the middle of doing business, whether it's necessary to wear the motorcycle wear, where they had a driving accident, and kinds of external injuries, etc. From the gathered results of analysis of the collected questionnaires, the item which got the lowest satisfaction was the inconvenience from the chafed front neck when driving. Besides, the results showed carriers' complaints like the elbow part felt tight, discomfort in the horizontal movement of the shoulders or back, and wind admission in between zippers. In addition, the respondents showed complaints in the item about hygroscopic property and air permeability at the armpits and back part, and 5 items about material flexibility, wind shielding property, living water repellency, weighty sensation, and night visibility were found to be low in respondents' satisfaction.

• Journal of Biosystems Engineering
• /
• v.40 no.4
• /
• pp.327-334
• /
• 2015

Purpose: A falling-type weight sorter equipped with a load cell was developed to sort lightweight dried persimmons. The performance of the sorter was also evaluated. Methods: The electronic weight sorter for dried persimmon comprises a feeder part, a weight-measurement part, an indicator part, a carrier cup, a discharging part, and a driving part. The weight setting and zero-point adjustment are performed digitally for the convenience of users. For the experimental trials, 228 rubber-clay specimens (representative of dried persimmons) in the weight range of 24.73~99.56 g were manufactured for use in experiments to evaluate the performance of the sorter. Results: The average error of the weight measurements from three experimental trials was 1.655%, with a bias of -0.492 g, a root-mean-square error (RMSE) of ${\pm}0.808g$, and a coefficient of determination ($R^2$ ) of 0.997. Conclusions: The load-cell-based electronic dried-persimmon weight sorter developed in this study facilitates effective, precise, and convenient sorting of dried persimmons.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.303-312
• /
• 2000

In this paper, we describe an image processing algorithm which is able to recognize the road lane. This algorithm performs to recognize the interrelation between AGV and the other vehicle. We experimented on AGV driving test with color CCD camera which is setup on the top of vehicle and acquires the digital signal. This paper is composed of two parts. One is image preprocessing part to measure the condition of the condition of the lane and vehicle. This finds the information of lines using RGB ratio cutting algorithm, the edge detection and Hough transform. The other obtains the situation of other vehicles using the image processing and viewport. At first, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, if vehicle knows the driving conditions which are lane angle, distance error and real position of other vehicles, we should calculate the reference steering angle.

• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.23-28
• /
• 2008

In this paper we suggested the moving magnet type actuator for optical disc drive which has high frequency of flexible mode. Generally, moving magnet type actuator has the advantage for increase the frequency of flexible mode. But it has low driving sensitivity due to the weight of its moving part. To overcome this shortcoming, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, we improved the driving sensitivity and frequency of flexible mode by using of DOE (design of experiment) procedure for EM circuit. Consequently, it is verified that final designed model satisfied with the desired specifications.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.118-128
• /
• 1998

Finite element analyses are carried out to provide results usable in the design of airbag module that consists of inflater, cushion, cover, mounting plate, etc. In the first phase, a deployment process of airbag module is analyzed to evaluate the pressure waveform of developed airbag and deployment characteristics, and is compared with the test results. Interaction between head form and inflated airbag module is investigated in the second phase. In the last stage, sled test with rigid dummy, airbag midule, driving system and car interior part are simulated to investigate the influence of airbag design factor on the behavior of dummy with seat belt. The procedures can be provided as a guideline for airbag module design and improvement of airbag module performance.