• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.139-145
• /
• 2017

PURPOSES : This study analyzed the difference in a driver's workload between using a driving simulator and field driving in tunnel, highway. METHODS : Based on the literature review, it was found that a driver's workload could be quantified using biosignals. This study analyzed the biosignal data of 30 participants using data collected while they were using a driving simulator and during a field test involving tunnel driving. Relative energy parameter was used for biosignal analysis. RESULTS : The driver's workload was different between the driving simulator and field driving in tunnels, highway. Compared with the driving simulator test, the driver's workload exhibited high value in field driving. This result was significant at the 0.05 level. The same result was observed before the tunnel entrance section and 200 m after the entrance section. CONCLUSIONS : This study demonstrates the driving simulator effect that drivers feel safer and more comfortable using a driving simulator than during a field test. Future studies should be designed considering the result of this study, age, type of simulator, study site and so on.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.71-77
• /
• 2007

Dangerous driving is a major cause of traffic accidents in Korea. It becomes more serious for commercial vehicles due to higher fatality rates. The Safe Driving Management System (SDMS), developed in this research, is a comprehensive solution that monitors and stores driving conditions of vehicles, detects dangerous driving situations, and analyzes the results in real time. The Safe Driving Management System consists of a vehicle movement information controller, a dangerous driving detection algorithm and a vehicle movement data report and analysis program. The dangerous driving detection algorithm detects and classifies dangerous driving conditions into representative cases such as sudden acceleration, sudden braking, sudden lane change, and sudden turning. Both computer simulation and vehicle test have been conducted to develop and verify the algorithm. The Safe Driving Management System has been implemented on commercial buses to verify its reliability and objectivity. It is expected that the system can contribute to prevention of traffic accidents, systemization of safe driving management and reduction of commercial vehicle operation costs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.224-231
• /
• 2006

A six-degree-of-freedom dynamic model with time-varying mesh stiffness/damping and friction has been developed for the dynamic analysis of a gear driving system. This model includes a spur gear pair, bearing, friction and prime mover. Using Newton???s method, equations of motion for the gear driving system were derived. Two computer programs are developed to calculate mesh stiffness, transmission error and friction force and analyze the dynamics of the modeled system using a time integration method. The influences of mesh stiffness/damping, bearing, and friction affecting the system were investigated by performing eigenvalue analysis and time response analysis. It is found that the reduction of the maximum peak magnitude by friction is decided according to designing the positions of pitch point and maximum peak in the responses.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.51-63
• /
• 2022

Convoy driving is one of the technologies of multi-vehicle cooperation driving along with platoon driving. All over the world, research on vehicle control mechanisms to maintain vehicle formation during convoy driving convoy driving has been actively conducted and in Europe's Autonet 2030 project has developed and demonstrated convoy driving services for highways. But, even the concept of convoy driving is still insufficient in Korea. Therefore, in this study, the concept of convoy driving service was established and scenarios and communication messages for service application on urban roads were developed. And its effectiveness was verified through simulation analysis. As a result of comparing and analyzing individual vehicle cooperative driving and convoy driving for the blind spot support service and dilemma zone safety support service, which are representative V2I cooperative driving services on urban roads, the number of conflicts(indicator of traffic safety) and delays and stops(indicator of traffic efficiency) are significantly improved in convoy driving compared to individual vehicle cooperative driving.

• The Korean Journal of Emergency Medical Services
• /
• v.6 no.1
• /
• pp.199-207
• /
• 2002

This is a study to evaluate the effects of the safety of ambulance driving and the occurrence of ambulance traffic accidents and to provide basic information for the description of various factors to reduce the ambulance traffic accidents. The major instruments of this study were Korean Self-Analysis Driver Opinionnaire. Questionnaire contains 8 items which measure driver's opinions or attitudees: driving courtesy, emotion, traffic law, speed, vehicle condition, the use of drugs, high-risk behavior, human factor. To take the analysis of data, the total of 187 drivers were investigated ambulance drivers in Gwangju Metropolitan City from 2002. 1. September to 2002. 20. September. The data were analyzed by the path analysis SPSS program. The result are as follows : 1. There was desirable attitude group(58.4%) and undesirable attitude group(41.7%) on safety ambulance driving. 2. It have suggested that rist factors of ambulance traffic accident much affected with emotion and speed control on safety ambulance driving(Y(Accident) = -2.00 + 0.6 X1(Emotion Control) + 0.4 $X_2$(Speed control) + E). 3. Almost 92.1% of respondents have agreed to necessity of emergency medical technics for ambulance drivers.

• The Korean Journal of Emergency Medical Services
• /
• v.4 no.1
• /
• pp.95-100
• /
• 2000

This is a study to evaluate the effects of the safety of ambulance driving and traffic accidents and to provide statistic information for the various factors to reduce the ambulance traffic accidents. The major instruments of this study were Korean Self-Analysis Driver Opinionnaire. This Questionnaire contains 8 items which measure drivers' opinions or attitudes: driving courtesy, emotion, traffic law, speed, vehicle condition, the use of drugs, high-risk behavior, human factors. The total of 145 divers were investigated ambulance drivers in Taejon City and others(6 City) from 2000. 5. July to 2000. 11. July. The data were analyzed by the path analysis - with SPSS and AMOS package program. The result are as follows : 1. It have suggested that risk factors of ambulance traffic accident much affected with emotion and speed control on safety ambulance driving(Y(Accident) = $0.88{\times}1$(Emotion Control) + $0.92{\times}2$(Speed) - $0.46{\times}3$(Traffic Law)+E). 2. It have suggested that risk factors of ambulance traffic accident much affected with emotion and speed control on safety ambulance driving(Y(Accident) = $0.398{\times}1$(Emotion Control) + $0.500{\times}2$(Speed) - $0.263{\times}3$(Traffic Law)+E) by coefficiecial structural analysis.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.3
• /
• pp.23-30
• /
• 2014

Purpose : The purpose of this study was to grasp the general status and trend of the driving rehabilitation research focusing on interested topics, study subjects, therapeutic approaches, study designs, etc. Methods : It targeted 18 papers published in the RISS (Research Information Service System) from 2000 to 2014, and performed a descriptive statistical analysis by classifying these papers to topics, study subjects, study forms, study designs, study fields, and researchers. Results : As a result of the analysis, for the study form in the driving rehabilitation field, the rate of experimental papers was 61.1%, the highest. Major study subjects turned out to be occupational therapists, the disabled, and the aged, in order. For the study quality and design, the rate of survey and non randomized-single experimental study, which correspond to stage IV, was the highest, and the general study quality was found to be low. For the study field, the rates of the roles and recognition of occupational therapists, evaluation on driving ability of the disabled, and institutional improvement and future measures were the highest, each of which being 16.7%. Conclusion : Through this study, major study subjects and study quality in the driving rehabilitation field could be grasped, and it could be found that for development of the driving rehabilitation field, higher quality researches on more various study subjects would be needed in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.72-81
• /
• 2018

In this study, the sinusoidal-wave driving method, six-step driving method, and twelve-step driving method, which can be used in an inverter for permanent-magnet synchronous motors, were simulated, and the results were compared to review their operating performance. These driving methods were classified according to the electrical conduction angle and phase current of the motor. Conventionally, only the transition control technique between the sinusoidal-wave driving method and six-step driving method was studied for the efficiency of the inverter. In this paper, however, comparative analysis was focused on a variety of transition control applications to use the advantages of each driving method. For this purpose, computer simulations for these driving methods were carried out to obtain the motor torque, speed control characteristics, and THD of the motor phase currents. As a result, the sinusoidal-wave driving method showed the best performance in all respects. The six-step driving method has better speed control characteristics than the twelve-step driving method, and the twelve-step driving method has a lower THD of the motor phase currents than the six-step driving method.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.5
• /
• pp.735-739
• /
• 2010

Driving workload is increasing according to developing new in-vehicle devices and introducing driving information systems. In this research using a driving simulator, EFRP (Eye Fixation Related Potential) was measured for evaluating driving attention and distraction while tasking cognitive workload, n-back tasks. The result of EFRP was compared with driver behaviors. Results suggest that EFRP is able to use for a method of evaluating driving workload, however, the analysis of driver behavior is difficult to find driving attention and distraction in the case of free flow of traffic situation.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.487-489
• /
• 1998

To evaluate vehicle performances and driving behavior of a vehicle, it is necessary to acquisit and analyze vehicle data during the vehicle driving, which affect fuel economy and emissions. An in-vehicle data acquisition system, which is called Mode Survey System(MOSS), is designed and developed to analyze the traffic and driving patterns of the vehicle. MOSS is a stand-alone system based on the 68HC11 MCU. MOSS logs various data relating to powertrain and vehicle driving such as vehicle speed, engine RPM, gear position, brake, clutch, fuel consumption, and others. The driving patterns are dependent on the driver's habit and the road and traffic conditions, these driving patterns would be able to make a official driving mode to be used in emission, fuel efficiency, shift survey, catalyst durability, and other tests using the analyzed driving patterns.