• 제목/요약/키워드: Drawing operation

검색결과 223건 처리시간 0.022초

강우 및 유입 하천수가 팔당호 수질에 미치는 영향분석 (A Study on the Water Quality Affected by the Rainfall and Influent Rivers in Paldang Reservoir, Korea)

  • 김종민;노혜란;허성남;양희정;박준대
    • 한국물환경학회지
    • /
    • 제21권3호
    • /
    • pp.277-283
    • /
    • 2005
  • This paper aimed to compare the daily water quality as well as the hydrological data gathered for the past two years (2000 to 2001) between the two influent rivers of Paldang reservoir. The analysis also has been carried out to draw out the factors that affect the water quality at the dam site, where the main drinking water drawing point is located. The relationship between total amount of monthly rainfall and monthly inflow showed $r^2=0.74$ (p<0.05). The highest peak of inflow of influent rivers recorded in August and September (in the year of 2000) and July and August (2001). Average inflows of influent rivers in 2000 and 2001 are calculated at 209.0, 161.5 CMS (Bughangang), 268.6, 148.2 CMS(Namhangang), and 7.8, 5.0 CMS (Gyeongancheon). The formula which was driven from the relationship between inflow and COD load of influent rivers, explained that COD concentration in general increased with the inflow. But during the rainy seasons (July, August, and September), COD concentration decreased according to the increase of inflow. The daily rainfall and COD concentration(or load) during the rainy season (August and September in the year of 2000, July and August in 2001) indicated that the peak of COD load correspond with the rainfall, which decreased sharply after 3 or 4 days. The reason was thought that the high COD load was diluted rapidly by the rain flow. Water temperature, pH and conductivity measured at dam site decreased obviously when the inflow sharply increased. Peak period of total phosphorus concentration coincided with that of inflow. In rainy season, chlorophyll-a concentration decreased obviously as the inflow increased. The reason can be ascribed to the flushing effect caused by the operation of floodgate.

초등수학영재 선발시험에 응시한 3, 4학년생들의 4층 Skeleton Tower 문제해결에 대한 사례 연구 (A Case Study on the 4-high Skeleton Tower Problem Solutions by the 3rd and 4th Graders in a Gifted Children in Math Selection Test)

  • 김해규
    • 한국수학교육학회지시리즈E:수학교육논문집
    • /
    • 제24권1호
    • /
    • pp.123-143
    • /
    • 2010
  • Skeleton Tower 문제는 대수와 기하를 통합하는 교육과정의 한 예로, 산술적인 세기, 정육면체의 개수를 세는 다양한 규칙이나 가능성을 열거하기, 기하학적 그림 그리기, 대수 방정식의 사용과 같은 다양한 방법으로 접근할 수 있으므로, 대수 방정식의 사용 방법만 제외한다면 초등학생에게도 사용 가능한 자료이다. 따라서, 본 연구에서는 J대학교 부설 영재교육원에서 실시한 2010학년도 초등수학반 영재선발시험에 응시한 3, 4학년생들을 대상으로, '4층 Skeleton Tower'를 해결하게 한 후, 이들의 문제해결 실태를 분석하여, 영재교육을 담당하는 교사들을 위한 시사점을 알아보고자 한다.

바이오매스 폐기물의 에탄올 생산 공정의 기술경제성 평가 (Techno-economic Evaluation of an Ethanol Production Process for Biomass Waste)

  • 곽인섭;황종하;이시훈
    • 공업화학
    • /
    • 제27권2호
    • /
    • pp.171-178
    • /
    • 2016
  • 세계 각국은 석유자원의 고갈로 인한 고유가, 지구온난화 등의 환경문제를 해결하기 위하여 많은 노력을 하고 있다. 그중 기존 화석연료를 대체할 수 있는 재생 가능한 청정 에너지원으로 바이오 연료가 주목받고 있다. 그러나 기존의 바이오연료 생산기술은 식량자원인 사탕수수, 옥수수 등을 사용하므로 이를 대체하는 기술개발이 요구되고 있다. 이에 본 연구에서는 식량자원을 대체할 폐기물의 가스화와 혼합 알코올 합성공정이 연계된 간접 알코올 전환 공정의 기술 경제성 평가를 수행하였다. 국내에서 공급되는 바이오매스 폐기물 자원량을 고려한 2000톤/일 급의 전환 공정에서 매일 533000 L의 연료용 에탄올을 생산한다고 가정하였고 이를 위해 필요한 경제성 자료는 기발표된 자료들로부터 계산되어 경제성 분석에 이용되었다. 경제성 분석은 원금회수기간과 내부수익률(internal rate of return, IRR) 및 순현재가치(Net Present Value, NPV)로 진행되었으며, 원료비용과 초기 투자비, 주요 공정비용 및 에탄올 가격 변화, 운용비용의 민감도 분석을 진행하여 각 항목별 민감도를 고찰하였다.

우리나라 의용소방대의 효율적인 운영에 관한 개선방안 연구 (Study of a Improvement Plans about Efficient Operation of Korean Volunteer Fire Departments)

  • 김형도;이시영
    • 한국화재소방학회논문지
    • /
    • 제31권5호
    • /
    • pp.95-106
    • /
    • 2017
  • 본 연구는 2012년부터 2016년까지 5년간의 (구)국민안전처 내부 소방행정자료와 통계연보, (구)소방방재청 통계와 통계청 자료 등을 활용, 우리나라 의용소방대의 소방 활동과 각종 대민봉사 지원활동 전반에 대한 통계분석을 통해 현실적 문제점을 도출하여 개선방안을 모색하였다. 연구결과는 첫째, 농촌지역 특성을 고려한 의용소방대 정원관리제도 보완 둘째, 의용소방대 내부적 갈등요인 해소를 위한 교양교육제도 강화 셋째, 의용소방대장 등 관리계층 대원들의 조직운영 리더십 역량강화 넷째, 지역여건에 맞는 의용소방대 교육 훈련제도 확립 다섯째, 의용소방대 대형재난현장 활동 보상제도 개선이다. 본 연구결과는 향후, 우리나라 의용소방대 발전의 기초자료로 활용되기를 기대한다.

비대면 온라인 원격수업 기반의 공감독서를 활용한 청소년의 공감역량에 관한 연구 (A Study on the Empathy Competence of Adolescents Using Empathic Reading Based on Online Remote Classes)

  • 송지애
    • 한국문헌정보학회지
    • /
    • 제55권1호
    • /
    • pp.541-565
    • /
    • 2021
  • 본 연구는 비대면 온라인 원격수업 기반의 효과적인 에듀테크 플랫폼을 설계하고, 독서 중심의 공감독서 프로그램과 연계 운영을 통해 청소년의 공감역량 효과를 규명하는 데 목적을 갖고 있다. 이를 위하여 선행연구를 바탕으로 원격수업의 에듀테크 구성요소를 기초로 교육 환경조성, 수업모형을 도출하고, 공감독서교육 프로그램을 정교화 한 후 현장 적용을 위해 경기도 소재 S중학교 1학년 4개 반 107명의 학생들을 대상으로 한 학기동안 연구를 수행하였다. 연구 결과, 원격기반 수업모형을 적용한 공감독서 프로그램은 인지적 공감과 정서적 공감에서 집단간 유의미한 차이가 나타났으며, 전체 총점에서 두 집단간 통계적으로 유의미한 차이가 있는 것으로 나타났다. 또한 원격기반의 공감독서교육과 실증적인 분석을 통해 청소년의 공감역량 효과와 의의를 검증하였으며, 코로나19로 인한 학생들의 학습격차 해소를 위한 방안으로 공감독서 프로그램의 발전 방향을 제안하였다.

영상 콘텐츠의 신뢰도 평가를 위한 언어와 비언어 통합 감성 분석 시스템 (Integrated Verbal and Nonverbal Sentiment Analysis System for Evaluating Reliability of Video Contents)

  • 신희원;이소정;손규진;김혜린;김윤희
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제10권4호
    • /
    • pp.153-160
    • /
    • 2021
  • IT 기술 발달에 따른 영상 콘텐츠 생산과 소비가 증가함에 따라 영상 콘텐츠를 통한 제품 리뷰 정보로 구매의사 결정이 빈번해졌다. 따라서, 리뷰 영상에 대한 신뢰성을 평가할 필요가 있다. 본 연구에서는 제품 리뷰 영상을 얼굴 표정 분석과 텍스트 마이닝을 통해 리뷰어의 표정과 음성을 분석하여 영상의 신뢰도를 분석한다. 영상 내 인물 표정의 감성 값을 추출하는 알고리즘을 활용하여 비언어 감성을 정량화하고, 유의미한 감정 변화 구간을 추출한다. 유의미한 감정 변화 구간의 리뷰어 음성을 텍스트화하여 표준어 및 비표준어 감성 사전 활용을 통해 긍정과 부정으로 리뷰에 대한 언어 감성 분석 후 수치화 한다. 비언어 감성 분석과 언어 감성 분석의 결과를 통합하여 일치 여부에 따라 신뢰도를 도출한다. 본 연구를 통해 영상 콘텐츠의 신뢰성 평가 방법을 제시한다.

2D 출력물 비교를 위한 PLC와 아두이노 CNC 제어 (PLC and Arduino CNC Control for Comparison of 2D Outputs)

  • 조해준;김강호;장현수;전종환;이승대
    • 한국전자통신학회논문지
    • /
    • 제16권6호
    • /
    • pp.1295-1302
    • /
    • 2021
  • 3D 프린터의 시장 규모가 증가되는 시점에서 출력물에 대한 정밀도와 모터에 의한 작업속도는 매우 중요한 사항 중 하나이다. 본 논문에서는 PLC 장비와 아두이노 CNC의 동일 출력물 비교를 위해서 CURA 프로그램을 이용하여 동일 출력물의 G-code를 생성하였으며, NC File로 변환 후, 각각의 장비에 펜을 부착하여 A4 용지에 특정 결과물을 출력하였다. 그 결과, 출력 시간이 PLC 장비의 경우 1m 39s, 아두이노 CNC의 경우 2m 5s로 측정되었으며 2D 출력물이 두 장비에서 동일하게 출력되는 것을 확인하였다.

건강검진센터 운영방식에 따른 공간 유형과 규모에 관한 연구 (A Study on the Spatial Typology and Size of Health Examination Center Depending on the Operating System)

  • 손지혜;조준영;김의현;김현정;양내원
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제28권3호
    • /
    • pp.17-26
    • /
    • 2022
  • Purpose: The purpose of this study is to classify space types according to the operating system of health examination centers and compare and analyze their sizes. Methods: Seven examination centers under the K Medical Research Institute with the same operating system and similar examination types and functional spaces are the subject of the investigation. Research is conducted through field investigation, user surveys, and drawing analysis. Results: The operating method of the health examination center can be largely divided into the function dispersed type and the function central type. The function dispersed type was planned as a vertical type, and the function central type was planned as a horizontal type. In the case of the function dispersed type, since the examinees move vertically to use the endoscope center and special examination center, the efficiency of the vertical movement must be considered when planning the function dispersed type of facility. The function dispersed type plans to increase work and manpower efficiency by arranging the areas used at the start and end of the examination. Because the function central type horizontally arranges related functions by area, it should be planned in a structure that makes it easy for examinees to find their way. Implications: Through this study, it is judged that it is possible to suggest architectural planning considerations that vary depending on the operation system of the examination center.

PS-NC Genetic Algorithm Based Multi Objective Process Routing

  • 이성열
    • 한국산업정보학회논문지
    • /
    • 제14권4호
    • /
    • pp.1-7
    • /
    • 2009
  • 이 논문은 다목적 공정순서계획 알고리즘을 소개한다. 공정순서계획이란 가용한 기계들을 이용하여 원재료를 가공 완료된 부품으로 변형해주는 최적 공정순서들을 결정하는 일이다. 어느 컴퓨터 지원 공정계획 시스템에서나, 가공작업 순서의 결정은 부품 가공이나 부품 도면상의 기술적인 요구사항들을 충족시켜주기 위한 가장 중요한 활동 중의 하나이다. 여기서, 목표는 생산시간, 생산비용, 기계가동률 또는 이들을 복합적으로 만족시켜주는 최적 가공순서를 생성하는 일일 것이다. 파레토 스트라튬 니치 큐비클 (PS NC) 유전 알고리즘이 두 가지 상호 배타적인 기준인 생산비용과 생산품질을 동시에 최적화 시켜주는 가공순서들을 찾는데 이용되었다. 예제에 의한 검증은 제안된 PS NC 유전자 알고리즘이 공정계획문제에 있어서 효과적이며 효율적인 결과를 가져오는 것을 보여준다.

감염병전문병원의 병동부 및 중환자부 영역 구성에 관한 연구 (A Study on the Zoning of Wards and Intensive Care Units (ICUs) in the Infectious Disease Hospital)

  • 이주랑;채철균
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제29권3호
    • /
    • pp.17-28
    • /
    • 2023
  • Purpose: This study aims to provide basic data for the future construction plans of the Infectious Disease Hospitals by analyzing the area composition and required room ratios in the wards and ICU of currently under-construction infectious disease hospitals. Methods: 3 Methods have been used in this paper. 1) This study conducted a literature review on major considerations and related guidelines for hospitals specializing in infectious diseases using existing data. 2) Based on the objects and activities of the hospital space, zones and areas were set for each department according to infection control. 3) Based on the established zones and areas, basic plan drawings of three hospitals specializing in infectious diseases currently under construction were collected and architectural drawing analysis was performed. Results: 1) Infectious Diseases Hospital must have a spatial organization that can accommodate patient isolation, infection control, efficiency of medical service, and changes. 2) Zones for infection control are divided into negative pressure and non-negative pressure zones based on airborne precaution isolation. It is divided into clean and contaminated zone according to class of cleanliness by Aseptic technique. Areas are classified by objects (patients, healthcare workers, supplies) and activities (access, medical treatment, support), and a system for organizing space is established based on this. 3) By analyzing the area composition of each departmental area, each required room, and each required space in the wards and intensive care units, it provides basic data for the spatial organization for architectural planning of the infectious disease hospital. Implication: It can be used as basic data when planning related facilities by analyzing the characteristics of the space plan of the required room according to the relationship between activities, movement lines, and operation plans based on user behavior.