• Asian-Australasian Journal of Animal Sciences
• /
• 제13권1호
• /
• pp.6-9
• /
• 2000

The purpose of this study was to evaluate the effect of lower numbers of sperm $(3{\times}10^9)$ per dose liquid semen and type of semen used in artificial insemination (AI) on sow reproductive performance in subtropical area. Semen was supplied by two commercial AI centers. A total of 671 female pigs from seven farms were inseminated with either $3{\times}10^9$ or $5{\times}10^9$ sperm per dose. Two types of semen were used: heterospermic semen from two boars of the same breed and homospermic semen from a single boar. After insemination, conception rate, farrowing rate, total litter size, and number of dead piglets were recorded. The analysis of variance indicated that there was no significant effect of interactions between pig farm, type of semen, or number of sperm on any of the traits measured. There were significant differences in conception rate, farrowing rate, and total litter size among pig farms (p<0.05). The effect of number of sperm per dose liquid semen ($3{\times}10^9$ or $5{\times}10^9$) was not significant. Sows inseminated with homospermic semen showed significantly higher conception and farrowing rates but significantly lower total litter size (p<0.05). In conclusion, the number of sperm per dose liquid semen for AI could be lowered to $3{\times}10^9 $ without affecting reproductive performance in subtropical areas like Taiwan.

• Journal of Radiation Protection and Research
• /
• 제32권4호
• /
• pp.190-193
• /
• 2007

The objective of this study is to recommend the radiation protection design parameters from the shielding point of view for concrete wall between the decay tank room and the primary pump room in TRIGA Mark-II Research Reactor Facility. The shield design for this concrete wall has been performed with the help of Point-kernel Shielding Code Micro-Shield 5.05 and this design was also validated based on the measured dose rate values with Radiation Survey Meter (G-M Counter) considering the ICRP-60 (1990) recommendations for occupational dose rate limit ($10{\mu}Sv/hr$). The recommended shield design parameters are: (i) thickness of 114.3 cm Ilmenite-Magnetite Concrete (IMC) or 129.54 cm Ordinary Reinforced Concrete (ORC) for concrete wall A (ii) thickness of 66.04 cm Ilmenite-Magnetite Concrete (IMC) or 78.74 cm Ordinary Reinforced Concrete (ORC) for concrete wall B and (iii) door thickness of 3.175 cm Mild Steel (MS) on the entrance of decay tank room. In shielding efficiency analysis, the use of I-M concrete in the design of this concrete wall shows that it reduced the dose rate by a factor of at least 3.52 times approximately compared to ordinary reinforced concrete.

• 방사성폐기물학회지
• /
• 제21권4호
• /
• pp.543-558
• /
• 2023

Currently, Japan is undertaking a nationwide project to measure and map radioactive contamination around Fukushima, as part of the efforts to restore normalcy following the nuclear accident. The Japan Atomic Energy Agency (JAEA) manages the Fukushima Environmental Safety Center, located approximately 20 km north of the Fukushima Daiichi nuclear power plant in Minamisōma City, Fukushima Prefecture. In collaboration with the JAEA, this study involved conducting comparison experiments and analyses with radiation detectors in high radiation environments, a challenging task in Korean environments. Environmental radiation surveys were conducted using three types of detectors: CZT, NaI(Tl), and LaBr₃(Ce), across two contaminated areas. Dose rate values were converted using dose rate conversion factors for each detector type, and dose rate maps were subsequently created and compared. The detectors yielded similar results, demonstrating their feasibility and reliability in high radiation environments. The findings of this study are expected to be a crucial reference for enhancing the verification and supplementation of procedures and methods in future radiation measurements and mobile surveys in high-radiation environments, using these three types of radiation instruments.

• 방사선산업학회지
• /
• 제17권4호
• /
• pp.551-557
• /
• 2023

In recent years, radiation has become a socially important issue, increasing the need for accurate prediction of radiation levels. In this study, machine learning-based models such as Multiple Linear Regression (MLR), Random Forest (RF), XGBoost, and LightGBM, which predict the dose rate by time(nSv h^-1) by selecting only important variables, were used, and the correlation between temperature, humidity, cumulative precipitation, wind direction, wind speed, local air pressure, sea pressure, solar radiation, and radiation dose rate (nSv h^-1) was analyzed by collecting weather data and radiation dose rate for about 6 months in Jangseong, Jeollanam-do. As a result of the evaluation based on the RMSE (Root Mean Squared Error) and R-Squared (R-Squared coefficient of determination) scores, the RMSE of the XGBoost model was 22.92 and the R-Squared was 0.73, showing the best performance among the models used. As a result of optimizing hyperparameters of all models using the GridSearch method and comparing them by adding variables inside the measuring instrument, it was confirmed that the performance improved to 2.39 for RMSE and 0.99 for R-Squared in both XGBoost and LightGBM.

• 대한의용생체공학회:의공학회지
• /
• 제38권5호
• /
• pp.256-263
• /
• 2017

By using the buildup characteristics of the radiophotoluminescence glass dosimeter(RPLGD), it is aimed to help the measurement of the accurate dose by measuring the radiation dose according to the time of the glass element. Five glass elements were arranged on the table and the source to image receptor distance(SID) was set to 100 cm for the build-up radiation dose measurement of the fluorescent glass dosimeter glass element(GD-352M). Radiation doses and saturation rates were measured over time according to irradiation time, with the tube voltage (30, 60, 90 kVp) and tube current (50, 100 mAs) Repeatability test was repeated ten times to measure the coefficient of variation. The radiation dose increased from 0.182 mGy to 12.902 mGy and the saturation rate increased from 58.3% with increasing exposure condition and time. The coefficient of variation of the glass elements of the fluorescent glass dosimeter was ranged from 0.2 to 0.77 according to the X - ray exposure conditions. X - ray exposure showed that the radiation dose and saturation rate were increased with buildup characteristics, and degeneration of glass elements was not observed. The reproducibility of the variation coefficient of the radiation generator was included within the error range and the reproducibility of the radiation dose was excellent.

• Radiation Oncology Journal
• /
• 제5권2호
• /
• pp.137-140
• /
• 1987

자궁경부암의 고선량율 강내치료의 매 분할 치료시마다 강내 applicator의 위치 차이로 인하여 조사 선량이 치료전 계획된 선량과 차이가 있을 수 있다. 저자는 자궁경부암 환자의 강내치료시 치료전 계획된 A점 선량 500 cGy와 치료직후에 촬영한 전후 및 측면 선 사진을 이용하여 계산된 A점 선량을 비교한 결과, 82예의 강내치료에서 치료 후 계산된 조사 선량과 계획 선량은 $500\pm18 cGy$이었으며 $84\%$에서 $500\pm25 cGy$의 범위에 포함되었다. 이러한 결과에서 계획 선량과 치료 후 계산된 조사 선량사이에 비교적 높은 일치율을 확인할 수 있었다.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.511-521
• /
• 2022

Decommissioning of nuclear power plants generates a large amount of radioactive waste in a short period. Moreover, Radioactive waste has various forms including a large volumes of metal, concrete, and solid waste. The disposal of decommissioning waste using 200 L drums is inefficient in terms of economics, work efficiency, and radiation safety. Therefore, The Korea Radioactive Waste Agency is developing large containers for the packaging, transportation, and disposal of decommissioning waste. Assessing disposability considering the characteristics of the radioactive waste and facility, convenience of operation, and safety of workers is necessary. In this study, the exposure dose rate of workers during the disposal of new containers was evaluated using Monte Carlo N-Particle Transport code. Six normal and four abnormal scenarios were derived for the assessment of the dose rate in a near surface disposal facility operation. The results showed that the calculated dose rates in all normal scenarios were lower than the direct exposure dose limitation of workers in the safety analysis report. In abnormal scenarios, the work hours with dose rates below 20 mSv·y^-1 were calculated. The results of this study will be useful in establishing the optimal radiation work conditions.

• 한국수정란이식학회지
• /
• 제12권2호
• /
• pp.195-202
• /
• 1997

The present study was carried out to evaluate the effect of superovulation treatments on ovarian responses, oocyte recovery rates and grades of collected oocytes using an ultrasound-guided transvaginal approach in Korean native cows. Superovulation in cows was induced with two different regimenes: 1) FSH-decreasing dose(n=8): the cows were received twice per day for three days of the total dose of 400 mg of FSH-p, 2) FSH-single dose(n=9): the cows were administrated a single dose of 400 mg of FSH-p in 25% PVP. The Observation of visible follicles and collection of oocytes were performed 12 hours following the last FSH in FSH-decreasing dose group and 48 hours after the FSH-single dose injection. All visible follicles larger than 6 mm were punctured and aspirated with a 6.5 MHz convex-array ultrasound transducer designed for intravaginal use. The mean number of visible follicles(> 6 mm) was significantly(P<0.05) higher in the FSH-decreasing dose treatment (22.811.9) and FSH-single dose treatment (20.612.0) groups than the non-treatment group(7.0$\pm$8). The mean recovery rate of oocytes was not significantly(P<0.05) different between the treatment and control groups, but the mean number of collected oocytes was significantly(P<0.05) higher in the FSH-decreasing dose treatment( 12.611.5) and FSH-single dose treatment (11.813.6) groups than the non-treatment group(3.7$\pm$0.5). In conclusion, the FSH-single dose treatment at superovulation in cows for ultrasound-guided aspiration might increase the number of aspiratable follicles and the recovery rate of follicular oocytes as the FSH-decreasing dose treatment.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권2호
• /
• pp.237-246
• /
• 2016

방사성동위원소 사용시설 내/외 화장실 표면 방사선량률과 공간 방사선량률을 측정하여 화장실을 이용하는 환자 이외 방사선작업종사자 및 환자보호자 등의 안전성을 확보하고 방사선 방어 연구에 대한 기초 자료로 제시 하고자 한다. 2014년 5월 1일부터 7월 31일까지 인천광역시 소재 종합병원 방사성동위원소 사용시설 내/외 화장실 4곳의 공간 방사선량률과 작업 전/후 표면 방사선량률을 각각 측정하였다. 의료기관별 방사성동위원소 사용시설 내 화장실 이용 실태조사 결과 환자뿐만 아니라 환자 보호자, 일부 방사선 작업종사자까지 다양하게 이용하고 있었다. 화장실 내 공간 방사선량률 측정 결과 핵의학적 검사 중 감마촬영실을 이용하는 화장실의 누적 공간선량률은 8.86 mSv/hr으로 가장 높게 측정되었고, 방사성옥소 치료실 화장실은 7.31 mSv/hr, PET촬영실 화장실 2.29 mSv/hr, 외래 진료과 화장실 0.26 mSv/hr으로 각각 측정되었다. 방사성동위원소 작업 전/후 화장실 내 표면 방사선량률을 측정한 결과 대부분 환자 배설물이 직접 닫는 변기 앞에서 표면 방사선량률이 가장 높게 측정되었고, 화장실 내 중앙, 입구 순으로 측정되었다. 개봉선원은 물리적 반감기가 짧고 에너지가 낮아 비교적 안전하여 방사선 관리구역에서 안전하게 사용되고 있다. 그러나 저에너지 이며 짧은 반감기의 방사선원이라 하더라도 환자에게 투여되면 그 이후 환자는 움직이는 방사선원이 되며 환자가 이용하는 장소는 배설물에 의한 방사선 오염 장소가 된다. 따라서 효과적으로 유효선량을 최소화하고 불필요한 피폭선량을 줄이기 위해 방사성동위원소 투여 후 충분한 수분 섭취를 독려하여 생물학적 반감기를 낮추고, 물리적 반감기가 허용 선량이하로 될 때까지 주변인은 환자로부터 가급적 멀리 떨어져 생활하도록 권고되어야 한다.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2287-2292
• /
• 2012

본 논문에서는 Ge가 함유된 일반 단일모드 광섬유의 감마선 유입손실을 측정하였다. 방사선 선원은 $Co^{60}$ 감마선 선원을 이용하였으며, 총 4시간동안 0.5 kGy/hr, 2 kGy/hr, 8 kGy/hr의 선량률로 조사하였다. 그 결과 감마선 조사에 의한 단일모드 광섬유의 전송손실이 뚜렷하게 나타났으며, 동일 누적선량에서 선량률이 클수록 전송손실이 증가하는 선량률 효과가 나타났다. 또한 감마선 조사 종료 후 광섬유의 전송손실이 클수록 유입손실의 회복률이 증가하는 어닐링 특성을 보였다. 본 실험결과는 향후 광섬유의 내방사화 연구의 기초자료로 활용할 것이다.