• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.9-15
• /
• 2012

Vibrational film has been more employed in ear-phones or small type of speakers along with a wide use of portable multi-media equipments such as MP3 and MP4. However, the current hand work production process of diaphragms is inefficient. In this study, a die-and-mold and a single production forming machine are developed, and they result in a multi-production forming machine. The multi-production forming machine consists primarily of a film feeding unit and an unwinding unit. A vacuum suction device provides the film feeding unit, while the unwinding unit is obtained using an appropriate damper. The advantage of the developed single production forming machine is shown according to a proper voice test.

• Journal of the Korean Ceramic Society
• /
• v.28 no.9
• /
• pp.730-738
• /
• 1991

Machinable ceramics containing ${\beta}$-spodumene crystal was fabricated by melting method using domestic pyrophyllite. Raw materials were batched by molar ratio of 8:2, 7:3, 6:4, and 5:5 for fluorophlogopite and ${\beta}$-spodumene. These compounds were melted at 1450$^{\circ}C$ for 1 hr and formed in graphite mold. Base glasses were heat-treated according to 2-step schedule which was determined from DTA, XRD analysis and SEM observation. Fabricated machinable ceramics have excellent themal, chemical properties and machinability.

• Design & Manufacturing
• /
• v.18 no.3
• /
• pp.44-53
• /
• 2024

A injection mold usually requires 30 to 50 revisions, and as the number of revisions increases, the burden of increased costs, schedule delays, and decreased reliability increases, reducing the competitiveness of companies. In addition, these costs become a more serious problem when the customer is far away, which is an obstacle to the export of domestic mold companies with excellent technology. The objective of this study is to develop an augmented reality platform that will facilitate the sharing of realistic 3D virtual objects in real time and enable mold designers to collaborate using a range of tools in remote locations and virtual environments. The platform collaboration solution enables simultaneous participation and synchronization of design collaboration with four types of devices (PC, mobile, VR, and MR). The efficiency and precision of the high-speed injection molding analysis module were validated through rigorous testing, demonstrating a processing speed that ranges from 500 to 3,000 times faster than that of the conventional numerical analysis method, with a relative error of less than 15% and a service performance of more than 80 fps. The user-friendly and intuitive UI/UX was configured and the usability was verified through scenario verification.

• Design & Manufacturing
• /
• v.9 no.1
• /
• pp.31-35
• /
• 2015

Recently, life expectancy increased in the development of medicine, the need for health has increased. Market for medical equipment is growing rapidly to an increase in the interest in health and aging worldwide. It is a device intended for ultra sensitive cleavage process of bone during joint replacement surgery on a technical advanced surgery, finishing, and hole. Domestic demand of the hand piece is a necessary condition on an ongoing basis. However, hand piece was made on the basis of the experience of many years in the country Japan, Germany, and the United States has spread to more than 90% domestic market. Feel the need for the development of the hand piece in the country, many companies are trying to in-house production hand piece. In an attempt to solve the problems with the hand piece of the present, in this paper, it was supposed to be a study of rechargeable hand piece to replace the existing pneumatic.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.4
• /
• pp.85-95
• /
• 2007

Single PPM Quality Innovation activity made a great contribution to strengthening the quality competitiveness and the international competitiveness for the domestic small and medium enterprises. But it doesn't work to companies that deal with the particular products for the difficulties during the promotion and the business management. Then, SQ-Mark, which is currently adopted to domestic automobile companies, was benchmarked and studied for its accessibility and solutions. Quality Innovation activity in the particular industry is requested to conduct the confirmation and the inspection in deeper level caused by the specialty of product itself, product engineering manufacturing processes. This study improved 6 steps of the Single PPM activity so that the Single PPM Quality Innovation activity is progressed well for the Mold industry especially among the particular industries. It shows the improvement to the management of the delivery schedule, which has been problematic, if adopted to the relating industries based on this study, it is anticipated to help the corporate operation much.

• Journal of Environmental Health Sciences
• /
• v.7 no.1
• /
• pp.51-57
• /
• 1981

This Study was carried out to investigate yeast and mold contamination in fermented milk products produced by 9 different domestic manufacturers from October 20. to December 5. 1980 The results obtained in the study were as follows 1) pH values of the products were ranged from pH 3.14 to pH 4.20 and average of sour milk drinks was pH $3.66\pm 0.19$ and fermented milks pH $3.74\pm 0.11$. Therefore the difference of pH average among sour milk drinks and fermented milks was statistically significant. (p<0.01) 2) In case of yeast contamination, yeast was found on all the four producted at the same date. From this result, it seemed that yeast contamination occured during the manufacturing progress. 3) Degree of contamination by the indicator organisms was E. coli positive, 3.7%: over 1,000 yeasts/ml, 14.8% over 10 molds/ml, 0.9%. 4) In the range of over 1,000 yeasts/ml, degree of contamination by yeast was 8.4% in fermented milk and 16.7% in sour milk drink. 5) Yeasts in product C increased to the spoilage number within 5 days and in H increased within 10 days at 5C. At 15$\circ$C, yeast increased to the spoilage number within 15 days in product A.D. 6) It seems that the yeast number of initial contamination should be important than the increase rate as criteria on the fermented Milk products.

• 보존과학연구
• /
• s.21
• /
• pp.273-291
• /
• 2000

The perilla oil is painted to the wooden cultural properties of protection of wood and pigment. But that is happened to discolor and gather mold because of the long drying time. So we were put to the test for the improvement of this matter. The result is follows;1. The perilla oil, do not parched domestic Perilla japonica, add to the Japanese acid clay, later passing through the filter paper that the pore size is less than $7\mum$ 2. If the perilla oil add to the antiseptic of Thiazole origin, the mold is suppressed.3. In the painting of perilla oil, the existing Dan-chung paints one time (Luster generation in the more than two times) and the non-existing Dan-Chung paints two times.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2012

Recent ultra-precision machining systems have nano-scale resolution, and can machine various shapes of complex structures using five-axis driven modules. These systems are also multi-functional, which can perform various processes such as planing, milling, turning et al. in one system. Micro machining technology using these systems is being developed for machining fine patterns, hybrid patterns and high aspect-ratio patterns on large-area molds with high productivity. These technology is and will be applied continuously to the fields of optics, display, energy, bio, communications and et al. Domestic and foreign trends of micro machining technologies for flat molds were investigated in this study. Especially, we focused on the types and the characteristics of ultra-precision machining systems and application fields of micro patterns machined by the machining system.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.20-24
• /
• 2008

Recently, the study for production technology is focused on cycle time reduction as various products are manufactured. In order to manufacture tool and die, rapid prototyping and rapid tooling are researched. Stereolithography apparatus, selective laser sintering, 3D printing, laminated object manufacturing are developed in rapid prototype. The purpose of this study is to develop rapid tooling technology using thermal spray process. This technology is not well-known to korea, but this study will be contributed in development of domestic molds industry through continuous research and development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.131-132
• /
• 2021

According to the domestic specification, the curing of the specimen for strength management used to determine the time of the mold deformity of the structure concrete in early spring and early autumn is cured in the field structure condition. However, when the seal curing is performed in the field, the temperature of the specimen is very low compared to the temperature of the actual structure, so the strength of the structure concrete predicted based on the strength of the specimen is much undervalued than the actual one, which causes the mold to be deformed. Therefore, this study analyzed the temperature history and compressive strength characteristics of the specimen for strength management through other sealing curing at 5℃ and concrete of the actual structure, and presented the most suitable curing method.