Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

A study about development of hand-piece for orthopedic surgery drived by battery

배터리 구동방식 정형외과용 핸드피스 개발에 대한 연구

  • Son, Chang-Woo (Major of Mechanical Engineering, Incheon National University) ;
  • Jang, Sung-Hui (Major of Mechanical Engineering, Incheon National University) ;
  • Jang, Young-Ju (Major of Mechanical Engineering, Incheon National University) ;
  • Seo, Tae-Il (Major of Mechanical Engineering, Incheon National University)
  • Accepted : 2015.02.26
  • Published : 2015.03.13
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, life expectancy increased in the development of medicine, the need for health has increased. Market for medical equipment is growing rapidly to an increase in the interest in health and aging worldwide. It is a device intended for ultra sensitive cleavage process of bone during joint replacement surgery on a technical advanced surgery, finishing, and hole. Domestic demand of the hand piece is a necessary condition on an ongoing basis. However, hand piece was made on the basis of the experience of many years in the country Japan, Germany, and the United States has spread to more than 90% domestic market. Feel the need for the development of the hand piece in the country, many companies are trying to in-house production hand piece. In an attempt to solve the problems with the hand piece of the present, in this paper, it was supposed to be a study of rechargeable hand piece to replace the existing pneumatic.

Keywords

References

  1. T.H. Kim, S.H. Lee, W.M. Kim. and J.B. Kim. "Analysis of High Speed 3-phase Brushless Motor for Surgical handpiece." The Korean Institute of Electrical Engineers, Vol. 2013, No. 4, pp. 26-27, 2012.
  2. S.H. Kim, J.Y. Lim. and H.Y. Lee. "A Comparative case study on the design and performance evaluation of high efficiency and low noise medical handpiece prototype." The Korean Society of Mechanical Engineers, Vol. 2011 No.10, 2011.
  3. K.J. Ryu, D.H. Youn, J.H. Baek, D.W. Lee, D.Y. Kim, D.Y. Kim and D.J. Song. "Nunmerical Analysis of Internal Characteristics on Dental High-Speed Air Turbine Handpiece." Korean Society for Computational Fluids Engineering, Vol. 2011, No. 5, p. 535, 2011.
  4. J.H. Lee, K.S. Kim. "Numerical Study on the Effect of Turbine Blade Shape on Performance Characteristics of a Dental Air Turbine Handpiece." Journal of the Korean Society of Propul, Vol. 13, No. 1, 2009.
  5. D.H. Youn, K.J. Ryu and D.J. Song. "Optimum Design of Internal Characteristics on Dental High-Speed Air Turbine Handpiece." Korean Society for Computational Fluids Engineering, Vol.2011, No. 11, pp. 180-186, 2011.
  6. S.H. Park, Y.H. Yoon, B.K. Lee, C.Y. Won, J.H. Jeon and I.S. An. "Battery Type Surgical Handpiece Using Brushless DC Motor Drive." The Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 2006, No. 5, pp. 334-337, 2006.
  7. J.R. Kim, S.N. Min, M.H. Lee, J.H. Jung and J.H. Lee. "Design of Hand-piece by the adaptation of the user-centered design." Fall Conference of Ergonomics Society of Korea, Vol. 2010, No. 10, pp. 159-162, 2010.
  8. Y.C. Kim and Y.S. Jeong. "Surface Treatment of Aluminium by Anodizing." Prospectives of Industrial Chemistry. Vol. 2, No. 3, 1999.
  9. G.S. Lee, S.H. Bae and Y.Z. Lee. "A Comparative Study on Trivological Characteristics between Ni-P Electroless Plating and TiAlN Coating on Anodized Aluminum Alloy." The Korean Society of Tribologists and Lubrication Engineers, Vol. 26, Issue. 1, pp. 68-72, 2010.