• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 춘계학술대회
• /
• pp.21-27
• /
• 1995

This document collects Center for Drug Evaluation and Research (CDER) and Center for Devices and Radiological Health (CDRH) guidance documents, citations to the primary literature, and other published and unpublished documents relevant to development and approval of drug/device combinations collected by the CDRH Division of Cardiovascular, Respiratory and Neurological Devices (DCRND). Since the Master Bibliography number represents an accession number, an alphabetical (by author) listing appears at the end of the document, Any citation marked with a, is on file in the DCRND offices, 340B, in the Piccard Building (HFZ-450), 1390 Piccard Avenue, Rockville, MD 20850.

• 한국고분자학회지:고분자과학과기술
• /
• 제19권6호
• /
• pp.490-498
• /
• 2008

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.259.1-259.1
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2193-2195
• /
• 2001

This paper proposes test strategy detecting the faulted digital device or the faulted digital circuit on the digital circuit board using signature analysis technique based on the polynoimal division theory. SSA(serial Signature Analysis) identifies the faults by comparing the reminder from good device and reminder from the tested device, which reminder is obtained by enforcing the data stream outputed from output pins of tested device on LFSR(Linear Feedback Shift Resister) representing the characteristic equation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1993년도 제5회 학술발표회 논문개요집
• /
• pp.89-90
• /
• 1993

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.11-26
• /
• 2007

In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After the input device underwent a color transformation, a $3\;{\times}\;20\;size$ matrix was used in a linear multiple regression and the scanner's color representation of scanner was better than a digital still camera's color representation. When using the sRGB color space, the original copy and the output copy had a color difference of 11. Therefore it was more efficient to use the linear multiple regression method than using the sRGB color space. After the input device underwent a color transformation, the additivity of the LCD monitor's R, G and B signal value improved and therefore the error in the linear formula transformation decreased. From this change, the LCD monitor with the GOG model applied to the color transformation became better than LCD monitors with other models applied to the color transformation. Also, the color difference varied more than 11 from the original target in CRT and LCD monitors when a sRGB color transformation was done in restricted conditions.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5393-5397
• /
• 2011

본 연구는 나노튜브 제조시스템의 주요 구성요소인 압축-절단 장치가 안전한 성능을 발휘할 수 있도록 설계하는데 목적이 있다. 나노튜브의 제조에 있어서 가장 중요한 핵심기술은 튜브에 나노물질을 주입한 후 압력을 가하여 안전하게 봉합하고 전단분리 하는 것이다. 이 때 작용하는 압력과 속도가 나노튜브의 품질을 결정한다. 본 연구에서는 DC서보모터에 의하여 구동되는 압축-절단 장치의 구동력을 설계하고 이를 바탕으로 시스템을 제작한 후 시제품을 생산하는 과정을 보이고자 한다.

• 열처리공학회지
• /
• 제34권1호
• /
• pp.25-30
• /
• 2021

The differential gear system is a device designed to distribute the driving force of both vehicle wheels and control the rotational speed when the vehicle turns on a curve. The differential device consists of a differential gear case, a ring gear, and a pressure ring. A differential pinion gear and side gear are mounted on the differential pinion shaft inside the differential gear case. In this study, a pin press-fitting device that mounts the pinier gear and side gear to the differential pinion shaft in the differential gear case was designed, and a jig device for pin press-fitting using servo press was developed. In addition, by precisely measuring the pin press-in load and press-in distance according to the pin hole diameter of the differential gear shaft, the optimization of the pin pressin process was established.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.360-364
• /
• 1995

A zero voltage switching (ZVS) three level resonant pole inverter is presented for high power GTO inverters. The concept of auxiliary resonant commutated pole(ARCP) for two level inverter is extended to the three level inverter. The proposed auxiliary commutation circuit consists of one resonant inductor and two bi-directional switches, which provides ZVS condition to the main devices without increasing device voltage or current stresses. The auxiliary device operates with zero current switching(ZCS) which enables use of the low cost thyristors. The proposed circuit can handle higher voltage and higher power(1-10MVA) comparing to the two level one. Operation and analysis of the proposed circuit are illustrated. Experimental results with 10 KW, 4 kHz prototype are presented to verify the principle of operation.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.166-175
• /
• 2023

We theoretically analyze and experimentally demonstrate a polarization-diversified four-channel optical demultiplexer (DeMUX) comprising a hybrid mode conversion-type polarization splitter rotator (PSR) and delayed Mach-Zehnder interferometer optical DeMUX for use in coarse wavelength division multiplexing (CWDM)-based optical interconnect applications. The Si wire-based device fabricated by a complementary metal-oxide semiconductor-compatible process exhibited nearly the same filter spectral response irrespective of the input polarization state under the PSR. The device had an extremely low insertion loss of <1.0 dB, polarization-dependent loss of <1.0 dB, and interchannel imbalance of <0.5 dB, suppressing unwanted wavelength and polarization crosstalk from neighboring channels of <-20 dB at each peak transmission channel grid.