열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제34권1호
  • /
  • Pages.25-30
  • /
  • 2021
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지
DOI QR코드

DOI QR Code

Differential gear case와 피니언 샤프트 체결을 위한 핀 압입 장치설계 및 측정에 관한 연구

A Study on the Design and Measurement of Pin Press-Fit Device for Fastening Differential Gear Case and Pinion Shaft

  • 장태환 (부산대학교 나노메카트로닉스공학과) ;
  • 권진욱 (부산대학교 나노메카트로닉스공학과) ;
  • 엄지현 ((주) SMEC 융복합사업부) ;
  • 김정아 ((주) SMEC 융복합사업부) ;
  • 김태규 (부산대학교 나노메카트로닉스공학과)
  • Jang, T.H. (Dept. of Nanomechatronics Engineering, Pusan National University) ;
  • Gwon, J.U. (Dept. of Nanomechatronics Engineering, Pusan National University) ;
  • Eum, J.H. (Convergence Business Division, SMEC Co., Ltd) ;
  • Kim, J.A. (Convergence Business Division, SMEC Co., Ltd) ;
  • Kim, T.G. (Dept. of Nanomechatronics Engineering, Pusan National University)
  • 투고 : 2021.01.07
  • 심사 : 2021.01.18
  • 발행 : 2021.01.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The differential gear system is a device designed to distribute the driving force of both vehicle wheels and control the rotational speed when the vehicle turns on a curve. The differential device consists of a differential gear case, a ring gear, and a pressure ring. A differential pinion gear and side gear are mounted on the differential pinion shaft inside the differential gear case. In this study, a pin press-fitting device that mounts the pinier gear and side gear to the differential pinion shaft in the differential gear case was designed, and a jig device for pin press-fitting using servo press was developed. In addition, by precisely measuring the pin press-in load and press-in distance according to the pin hole diameter of the differential gear shaft, the optimization of the pin pressin process was established.

키워드

참고문헌

  1. Mizoguchi, Norihiro, Susumu Okada : U.S. Patent No.10,167,945 (2019).
  2. Patrick Adebisi Olusegun Adegbuyi, Opeyemi Lukuman : International Journal of Science, Technology and Society 5(3) (2017) 41-45. https://doi.org/10.11648/j.ijsts.20170503.13
  3. 장태환 외 4인 : 열처리공학회지, 32(6) (2019) 270-274. https://doi.org/10.12656/jksht.2019.32.6.270
  4. 장태환 외 4인 : 열처리공학회지, 33(6) (2020) 303-309.
  5. 정성훈 외 4인 : 한국자동차공학회 학술발표대회, (2009) 2705-2710.
  6. K. Mori, K. Akita and Y. Abe : International Journal of Machine Tools and Manufacture, 47(2) (2007) 321-325. https://doi.org/10.1016/j.ijmachtools.2006.03.013
  7. K. Osakada, K. Mori, T. Altan and P. Groche : CIRP Annals, 60(2) (2011) 651-672. https://doi.org/10.1016/j.cirp.2011.05.007